Top Irwin Tap And Drill Reviews

IRWIN Drill Bit Set 60-Piece 80181

  • Drill bits are engineered with premium high-speed steel in a bright finish.
  • Each drill bit has a 118° chisel-point tip that's designed for general purpose applications.
  • IRWIN Tools drill bits drill exact-sized holes for tapping applications.
  • Ideal for use when non-fractional-sized holes are required.
  • For automotive, maintenance and repair, portable drills and stationary drill press applications.
Check Stock

Irwin 0 - 1/2' Hanson Adjustable Tap Wrench

  • Irwin 0 - 1/2" Hanson Adjustable Tap Wrench 12088.
Check Stock

IRWIN Drill Bit Set, Titanium Nitride Coated, 29-Piece (3018003)

  • Titanium Nitride Coated-coated nitride drill bits last longer and feature a cutting edge that stays sharp.
  • 135° split-point tip starts drilling immediately and helps eliminate walking.
  • IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses.
  • Includes 1/16" through 1/2" drill bit sizes in 1/64" increments.
  • Titanium Nitride drill bits last longer and feature a cutting edge that stays sharp.
Check Stock

IRWIN Step Drill Bit Set 3-Piece 10502CB

  • Drill bit is engineered with M-35-grade Cobalt Alloy Steel steel for maximum life when drilling in tough steel.
  • Drill bits feature a radial concave flute.
  • IRWIN drill bits have laser-marked sizes for simple identification.
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock

Irwin Tools 3046002 Speedbor MAX Self-Feed Wood Bit Extension, 12\ , Black

  • Adds 12 inches to SPEEDBOR Max Self-Feed wood drilling bits..
  • Forged in one piece from high carbon steel for maximum strength under tough drilling conditions..
  • Precision-milled shank eliminates run-out and wobble..
  • Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
  • Drill bits feature replaceable screw-point tips that pull the drill bit fast for clean, true holes.
  • 7/16-inch hex impact shank reduces slipping in standard chucks.
  • IRWIN drill bit extension is compatible with most 7/16-inch impact drills.
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

IRWIN Tools SPEEDBOR Blue Groove Pro Spade Bit Set with Case, 8-Piece (341008)

  • Drill bits feature a Blue-Groove point and cutting edge for fast chip removal.
  • Spade bits use double-cutting spurs that scribe the outside of the hole, reducing breakout.
  • Flat drill bit design features a large shank for added durability.
  • Paddle bit with grooved hex shank resists slipping in drill chuck or bit extension.
  • Comes in an IRWIN Pro Set case made of durable molded ABS resin.
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock