Top Iron Steel Material Reviews

Nuvo Iron PCP03 x 5 1/2\ Pyramid Post Cap, Black

【Durable Material】 The 4 by 4 fence post caps are made of pressed steel, have a long lasting for the outside usage. Notice: The caps are unfinished, you can paint the color as you like to match your fence style.
【Heavy Duty Steel Caps for Decorating】Unfinished square fence caps that you can paint any color as you want to match the post. The square fence caps is not easy to rust after painting.
【Great Protection】These steel fence post caps protect the pressure treated posts from premature damage. UV proof to protect the posts from harsh sunlight.
【Easy to Install】Tack weld the corners to insure the caps don't come loose and waved off by strong wind. Notice: There are no holes on the post. You can drill holes if it is necessary.
【Multi-Usage】 The 10 Pack of 4 x 4 inch square post caps fit for square steel fence posts or gate frame sides, iron gate, iron fence, iron staircase. Please note there may be some oil stains on the caps, which comes with the material. It will be covered after painting.

Check Stock

Direct Store Parts Kit DG135 Replacement for Brinkmann 7231 Gas Grill Burners Heat Plates Cooking Grids

Special Notes for this item: If you are looking for parts, the BRAND and MODEL No.# (if provided, this item might be compatible with) listed below are....
Replacement for Brinkmann 7231 Gas Barbecue Grills.
Original Part Numbers: 115-7231-0, 115-7231-2, 600-7100-0, 812-7140-0, 600-8502-4, 11572310,....
Direct store Parts Kit includes 3 Stainless Steel burners, 3 Porcelain Steel heat plates, and 1 set of 3 Porcelain Cast Iron cooking grids.
Cooking Grate Dimensions:17 5/8" x 9 5/16" Each, 17 5/8" x 27 7/8" Total, 19 1/4" x 24 3/4" Total.
Grill Grate Material: Porcelain Coated Cast Iron.

Check Stock

DGOL Stainless Steel Mini Portable Metal Sheet Thickness Gauge Material Wire Thickness Gage

DGOL METAL SHEET THICKNESS GAUGE IS A GREAT TOOL TO GAUGE NON-FERROUS WIRE AND METAL SUCH AS COPPER,BRASS,ALSO GAGING UNCOATED SHEET,PLATE IRON AND STEEL.
MATERIAL: STAINLESS STEEL WITH GOOD FINISH,CLEAR AND EASY TO READ LETTERS AND NUMBERS.
WHY YOU SHOULD CHOOSE OUR GAUGE.1:OUR GAUGE IS MADE OF STAINLESS STEEL,NOT IRON OR NORMAL STEEL,MOST PRODUCT IN MARKET ARE MADE OF IRON OR STEEL.. 2: THE NUMBERS AND LETTERS ARE VERY CLEAR AND SHINNING.
SMALL GAUGE, NOT AS BIG AS YOU THINK, LENGTH IS 2.88"(7.3 CM), WIDTH IS 1"(2.54 CM).
THE THICKNESS GAUGE PROVIDE QUICK AND ACCURATE MEASURING,A GREAT TOOL FOR WELDER,MINI GAUGE,PORTABLE TO CARRY AND EASY TO USE.

Check Stock

28mm Dia 60-Degree Silver HSS Double-edged Dovetail Tool Metalworking End Mill 12 Flutes

HSS material, durable and long service life..
Blade diameter: 30mm/1.18" , Shank Diameter: 16mm/0.63".
Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial slitting/engraving, not hazardous article..
It is double-edged with regualr distribution,10 flutes making the the slitting stable..
It fits for meatalworking mold steel, cast iron, carbon steel, alloy steel, tool steel, general iron material..

Check Stock

Direct Store Parts Kit DG137 Replacement for Charmglow Heavy Duty 810-7400-S Gas Grill 4 Burners Heat Plates Cooking Grid

Special Notes for this item: If you are looking for parts, the BRAND and MODEL No.# (if provided, this item might be compatible with) listed below are....
Replacement for Charmglow Heavy Duty 810-7400-S Gas Grills.
Original Part Numbers: 812-7140-0, 81271400, 600-7100-0, 60071000, 115-2300-0, 11523000.
Direct store Parts Kit includes 4 Stainless Steel burners, 4 Porcelain Steel heat plates, and 1 set of 2 Porcelain Cast Iron cooking grids.
Cooking Grate Dimensions:19" x 12 1/2" Each, 19" x 25" Total.
Grill Grate Material: Porcelain Coated Cast Iron.

Check Stock

Direct Store Parts Kit DG195 Replacement for Master Forge 5 Burner Gas Grill L3218 3218LTN Grill Repair Kit

Special Notes for this item: If you are looking for parts, the BRAND and MODEL No.# (if provided, this item might be compatible with) listed below are....
Replacement for Master Forge 5 Burner Gas Grill L3218, 3218LTN Grill.
Original Part Numbers:L3018S-00-2700, KENMFT1, E3518-00-2002.
Grill Grate Dimensions: 17 3/4" x 10 7/16" Each or 17 3/4" x 31 5/16" Total.
Cooking Grid Material: Porcelain Coated Cast Iron.
Direct store Parts Kit includes 5 Stainless Steel burners, 5 Stainless Steel heat plates, and 1 set of 3 Porcelain Cast Iron cooking grids..

Check Stock

Weiler 21115 Power Tube Brush, Double Stem/Double Spiral, 1\

Ideal for aggressive cleaning and deburring on on steel, armored steel, cast iron, ductile iron and tool steel parts.
Features four stem wires and a double spiral of straight wire fill material.
1/4" stem diameter for use on CNC/milling/automatic machine, drill, drill press, corded/cordless hand drill or cordless screwdriver.
Specifications: 1" Power Tube Brush, .0104" Steel Wire Fill, 2-1/2" Brush Length.
Country of Origin: United States of America.

Check Stock

Ryan 660Lbs Permanent Lift Magnets with Release, Steel Magnetic Lifter, Lifting Magnet with Strong Neodymium Magnets

【NO ELECTRICITY REQUIRED】- Super-powerful "rare earth" neodymium iron boron magnets require no electricity..
【660LBS LIFTING CAPACITY】- 660 lbs Steel Magnet Magnetic Lifter. Our products can safely lift 100kg goods like plate steel, block or round steel and iron material..
【LONG SERVICE LIFE】- Our magnetic lifter is made with N42 magnet. Anticorrosion product has a long service life..
【EASY OPERATION】- The design of a handle wrapped by rubber and several safe bolts improve the products’ safety and stability..
【WIDE APPLICATION】- Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material..

Check Stock

Pump, Grinder, 2 HP, 15a

Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....

Check Stock

Direct Store Parts Kit DG118 Replacement for BBQ Grillware GGPL-2100 Gas Grill Burners, Heat Plates, Cooking grids

Special Notes for this item: If you are looking for parts, the BRAND and MODEL No.# (if provided, this item might be compatible with) listed below are just for your reference as shopping guide. Please DO double check the size and shape of your original parts, and compare with ours before ordering..
Replacement for BBQ Grillware GGPL-2100 Gas Grill.
Original Part Numbers: CG2150-72A, CG2150-16A, CG2150-40B,.
Cooking Grid Dimensions: 19 1/4" x 12 3/8" Each, 19 1/4" x 24 3/4" Total.
Grill Grate Material: Porcelain Coated Cast Iron.
Direct store Parts Kit includes 3 Stainless Steel burners, 3 Porcelain Steel heat plates, and 1 set of 2 Porcelain Cast Iron cooking grids.

Check Stock

Ryan 880Lbs Permanent Lift Magnets with Release, 400KG Steel Magnetic Lifter, Lifting Magnet with Strong Neodymium Magnets

【NO ELECTRICITY REQUIRED】- Super-powerful "rare earth" neodymium iron boron magnets require no electricity..
【660LBS LIFTING CAPACITY】- 660 lbs Steel Magnet Magnetic Lifter. Our products can safely lift 100kg goods like plate steel, block or round steel and iron material..
【LONG SERVICE LIFE】- Our magnetic lifter is made with N42 magnet. Anticorrosion product has a long service life..
【EASY OPERATION】- The design of a handle wrapped by rubber and several safe bolts improve the products’ safety and stability..
【WIDE APPLICATION】- Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material..

Check Stock

21st & Main Light weight Cast Iron Wok, Stir Fry Pan, Wooden Handle, 14 Inch, chef’s pan, pre-seasoned nonstick, commercial and household, for Chinese Japanese and others Cooking

Wooden handle can support tight gripping and keep the handle cool when you stir-fry. It is great tool for stir fry, it is stir fry cookware, stir fry pan, stir fry pot, woks & stir-fry pans, deep frying pan, deep frying wok, iron pot, non stick fry pan, non-stick frying pan..
Iron Material–The material of this wok is iron. It is healthy cookware, and eco-friendly. It is iron wok, iron pan, iron cookware, iron skillet, stir fying pan, stir egg pan, stir skillet, large roasting pan, steel pan, deep fryer pot, and this is making stir fry easy..

Check Stock

KAKURI Japanese Mortise Chisel for Woodworking 3/8\ (9mm), Made in JAPAN, Wood Chisel Oire Nomi, Razor Sharp Japanese High Carbon Steel Blade, White Oak Wood Handle

... small crafts. They are grouped as "tataki nomi" and can be used by tapping with a hammer or mallet..
[Razor Sharp Laminated Japanese Steel Blade] The blade edge is sharp Japanese high-carbon steel (Hitachi Yasuki Kigami Yellow Steel No.3) and is laminated with softer steel. The layered construction of the two steel materials increases blade durability and improves sharpening ease. Also, the back of the blade is hollow ground for excellent sharpness. Elevate your work with authentic Japanese woodworking tools..
[Craftsman Sharpened / Sharp Out of the Box] Each blade is finished and sharpened by skilled Japanese craftsmen. Sharp right out of the box..
[Heavy Duty Wooden Handle] The handle is made of durable Japanese white oak wood. The natural wood provides a comfortable grip. The handle end is reinforced with an iron hoop (Katsura), which is a feature of Japanese chisels..
[Product specifications] Made in Japan / Size: 8.4×0.9×0.9 inches / Blade Width: 9mm / Blade Back: Hollow grind / Blade Material: Japanese high carbon steel (Hitachi Yasuki Yellow Steel #2) + Soft iron / Handle Material: Japanese white oak with Katsura iron hoop.

Check Stock