Top Ir Repeater Cable Reviews

BAFX Products - All-in-One Infrared IR Repeater Kit/Remote Control Extender Cable / 1, 2 or 4 Device Contro (1 Device)

  • ...se your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for..
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!.
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!.
  • RESISTANT to interference from stray infrared so....
Check Stock

TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV

  • An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look.
  • IR Repeater system allows you to Control home theater components located behind cabinet doors.
  • Included with the system is - IR Receiver (2 inches by 1/2 Inch).
  • Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches).
  • Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB.
  • Support up to six emitter output connections.
  • Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW.
  • If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end.
Check Stock

Obvis USB IR Repeater - Infrared Extender Repeater Hidden IR Repeater System with 1 Emitters 1 Receiver

  • IR Repeater compatible with all remote control devices with frequency range between 38 to 56khz.
  • Control Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls.
  • Infrared Repeater comes with adhesive backing sticks directly onto different devices.
  • Cable Length From USB To Receiver: Approx. 4 Feet.
  • Cable Length From Receiver To Emitter: Approx. 6.5 Feet.
Check Stock

SZBJ IR Repeater,IR Remote Control Extender,Infrared Repeater System,Apply to Cat6/Cat5e/Cat8 Ethernet Cable Connection(Four Head ir emitter)

  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Out of sight :small main block & pure copper wire to transfer signal up to 300 meters,so you can place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control. IR Repeater,IR Remote Control Extender,Infrared Repeater System,Apply to Cat6/Cat5e/Cat5 Ethernet Cable connection，Only need to be connected via network cable, no additional wiring changes are required, which greatly improves work efficiency.
  • Devices compatiable : Tested to work with amplifier, cable box, stereo receiver,game console, Satellite TV receiver, CD player, DVD player, Blu-ray player and other streamers as well as most A/V devices, Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more..
  • Devices concontroled:you can control up to 2 infrared devices，Multi-head transmitter can be replaced, you can purchase and replace it yourself..
  • 1-IR Receiver（Comes with a receiver）.
  • 1-Four heads IR Emitter Port（With USB 5V interface）.
Check Stock

RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m

  • Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV..
  • Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house..
  • High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances..
  • Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach..
  • Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components..
Check Stock

DEMAO ir Repeater Kit ，ir Extender ，Infrared Repeater System Kit Remote Controls Home Theater Out of Sight .Control 1 DMIR0106TA Ir Repearter Kit

  • 1）With Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD Player, Blu-Ray Player and other streamers as well as most A/V devices..
  • 2）This 1x6 IR Repeater system makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight. This IR Block also features an Ethernet (CAT5 or higher) input on a terminal block connector for applications where the IR receiver needs to be further up to 100 meters away. To use Ethernet extension, an extra terminal block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range ....
Check Stock

3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.

  • 【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
  • 【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
  • 【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
  • 【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
  • IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
  • 【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).
Check Stock

ENSIGEAR IR Repeater Kit, ir repeater system，IR Remote Control Extender Remote ，Control 1 to 18Devices.IR Extender 100 Feet，20KHz-60KHz Dual Sensors Mini Receiver,Super compatibility

  • 1）With Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD Player, Blu-Ray Player and other streamers as well as most A/V devices..
  • 2）This 1x6 IR Repeater system makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight. This IR Block also features an Ethernet (CAT5 or higher) input on a terminal block connector for applications where the IR receiver needs to be further up to 120 meters away. To use Ethernet extension, an extra terminal block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range ....
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock

OBVIS IR Infrared Remote Control Extender Repeater Cable (10 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit - Black

  • This Infrared Repeater Cable applies to all remote control devices from 38 to 56 khz.
  • IR Repeater Extension controls Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls.
  • Come with adhesive backing sticks directly onto different devices.
  • 1 Receiver, 1 Emitter, Connects to USB port on TV or home theater device for power.
Check Stock

CMPLE - IR Emitter Extender Mini Stick-On Infrared Emitters Blink Eye, Remote Control Extension Cable 3.5mm 10 Feet

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

SZBJ IR Repeater, IR Remote Repeater, Infrared Remote Control Extender Kit

  • Upgraded repeater: SZBJ ir repeater kit is compatible with ALL IR controlled devices and all other brands of components.
  • Devices control : you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters sold separately in our store ..
  • Out of sight : SZBJ ir remote repeater allows you to place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control and still be able to control it..
  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Warranty&support : 100% free replacement for any manufacturing defects, and 100% money refund for any unsatisfaction within 30 days. Contact us any time for any problem!.
Check Stock

IR Infrared Emitter Extension Cable 1.5m Long 45 Degree Emission Angle 3.5mm Jack Single Red Head 5pcs

  • ... etc. (not compatible with Yamaha RX-V677)).
  • ★ 10FT CABLE – 10 feet long cable with 3.5mm plug allows you to extend the infrared signal into 49.21ft, horizontal half angle 45 degrees, self-adhesive backing let you paste on wall and remote control all devices with a IR range of 38-56kHz..
  • ★ CLEAN LOOK – Our IR Repeater system cable is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look. Epoxy resin packaging type and shell can filter visual interference..
  • ★ FLEXIBLE+ RISK-FREE PURCHASE – You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money!.
Check Stock