Top Ir Receiver Reviews

3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.

  • 【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
  • 【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
  • 【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
  • 【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
  • IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
  • 【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the....
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip:....
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock

Small 38-56kHz External IR Receiver Extender Works Selected Cable Providers Boxes Including - Verizon FiOS, Comcast Xfinity X1, Cox, Charter, Spectrum DVR and Cable Boxes See Compatibility Chart

  • HDTV Hookup New 9.8ft Add on IR Receiver is a perfect addition, so you can hide your Cable Box and other products, so they are out of mind..
  • Smallest Size – at 21mm x 12mm this is by far the smallest less obtrusive IR Receiver..
  • Full IR Frequency range for todays technology at 38Khz and 56Khz. With a supporting distance of 40ft @38KHz and 25ft @56 KHz..
  • REPLACeS Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323.
  • Works with Easy to Install and Use - Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.-.
Check Stock

URWOOW IR Repeater Hidden Infrared Remote Extender System 1 Receiver 4 Emitters Control Kit USB Adapter for Amplifier Cable Box Satellite TV Receiver CD Player DVD Player Blu-ray Player

  • -This IR Repeater Kit Allows You to Control A/V component by the Existing IR Controller, Control the IR Devices Between Two Rooms Such as Adjusting the Volume or Changing TV Channel..
  • -With 1 Receiver Picks up the Signal from the Remote Controller, the Receiver is with a Convenient IR Confirmation LED.
  • -With 4 emitters send the Signal to the A/V Components.
  • -34-60kHz Operating Range(Please Aim at IR Receiver when Using Remote Control).
Check Stock

Replacement IR Remote Controller for M8 Android TV Box Matricom G-Box Q

  • Replacement IR Remote Controller for Matricom G-Box Q Android TV Box.
  • Replacement IR Remote Controller Matricom G-Box Q² Android TV Streaming Media Mini PC.
  • Note：This remote we have 100% tested before delivery and if not work on your GBOX, please make sure your tv box IR receiver function ok. and if IR receiver is dead,the box can not receive the IR remote singnals..
Check Stock

Att Formerly DIRECTV SMLD-00157-000 TiVo Replacement Remote

  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for..
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!.
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over t....
Check Stock

IR Emitter Extender cable,2-eye transmitter 20-60Hz） cable length 10FT,support TV,DVD,CD DVR cable box set-top box etc.

  • COMPATIBLE:with Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD....
  • IR Emitter Mini Stick-On Infrared Emitters Blink Eye. This mini emitter Emits IR signal from modulator to AV component. It is designed to be installed....
  • Two Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • IR emitter extension cable with single eye that is compatible with devices in 38khz and 3.5mm port.
  • Installation is quick and easy. Simply connect the IR Emitter to your remote control extender and put the IR eyes inside the cabinet. By placing the....
Check Stock

SZBJ IR Repeater,IR Remote Control Extender,Infrared Repeater System,Apply to Cat6/Cat5e/Cat8 Ethernet Cable Connection(Four Head ir emitter)

  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Out of sight :small main block & pure copper wire to transfer signal up to 300 meters,so you can place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control. IR Repeater,IR Remote Control Extender,Infrared Repeater System,Apply to Cat6/Cat5e/Cat5 Ethernet Cable connection，Only need to be connected via network cable, no additional wiring changes are required, which greatly improves work efficiency.
  • Devices compatiable : Tested to work with amplifier, cable box, stereo receiver,game console, Satellite TV receiver, CD player, DVD player, Blu-ray player and other streamers as well as most A/V devices, Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more..
  • Devices concontroled:you can control up to 2 infrared devices，Multi-head transmitter can be replaced, you can purchase and replace it yourself..
  • 1-IR Receiver（Comes with a receiver）.
  • 1-Four heads IR Emitter Port（With USB 5V interface）.
Check Stock

BAFX Products - Extra IR Receiver for BAFX Products IR (Infrared) Repeater Kit / Remote Control Extender Kits

  • INTEGRATE – Our Peephole IR receiver for the BAFX Products Single Zone Repeater kit is designed to be mounted in a wall, cabinet or door so you have more sleek, streamlined look to your setup! This will require you drill a ½” hole in your wall or cabinet, slide the peephole receiver in and tighten using a 5/8” wrench..
  • FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology..
  • COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!.
  • IMPORTANT – This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so will not work and may cause undesirable operation of your device..
  • WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support!.
Check Stock

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

  • ...ht that are kept in a closed cabinet or in anther room ( expandable up to 18, and 4 x single emitter provided in the package , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
  • Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
  • This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..
  • [ PACKAGE INCLUDE] 1x IR Metal Connecting Block, 4 x Single IR Emitters (Controls 4 Devices), 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mo....
Check Stock

Xantech DL95K Universal Dinky Link Extended Range IR Kit

  • Low profile and easy to hide, it works with all types of cable boxes, satellite boxes, and TVs.
  • Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents.
  • IR modulation frequency bandwidth: 25-60kHz.
  • Reception range: up to 120 ft (36m) depending on conditions.
  • Color-coded connectors for fast, easy installation.
  • Kit includes DL95 IR receiver, Model 789-44 connecting block that connects one IR receiver to four IR emitter ports (can drive up to four dual....
Check Stock