Top Io Hawk Board Reviews

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock

Compute Module DSI Display Adapter, 22PIN to 15PIN Adapter, for Official Compute Module 4 IO Board and Waveshare Compute Module IO Board,Compute Module IO Board Plus

Compute Module DSI display adapter, 22PIN to 15PIN, allowing the Compute Module to use 15PIN DSI displays.
Suitable for Compute Module IO Board,connecting with Compute Module 4 IO Board.
Suitable for connecting with Waveshare Compute Module IO Board Plus.
Support all Waveshare DSI LCD, such as 4.3inch DSI LCD,5inch DSI LCD,4.3inch DSI LCD (with Case).

Check Stock

KEYESTUDIO Pico IO Prototype Expansion Board for Raspberry Pi Sheild DIY Kit

The Keyestudio Pico IO prototype expansion board works with the Raspberry pico board..
It can expand IO ports of the pico board..
There are two IIC ports, a serial communication interface , three analog ports and six digital ports..
This sensor board simplifies the circuit and makes it easy to connect with commonly used sensors. You can stack a Raspberry Pi pico board onto this shield..
KEYESTUDIO Technical Support - If there are any problems during use, please feel free to contact us and we will respond quickly to technical support..

Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.

Check Stock

AITRIP 10PCS PCF8574 PCF8574T IO Expansion Board I/O Expander I2C Evaluation Develop Module

The PCF8574 IO Expansion Board provides general-purpose remote I O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)..
The main resources: PCF8574, I2C interface, the 8-bit parallel.
Typical applications: for I / O resource constraints the MCU I / O expansion.
PCF8574T expansion board applicable to a variety of platforms including AVR / ARM.
PCF8574T PCF8574 IO expansion board support I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules).

Check Stock

TONY HAWK SHRED EXCLUSIVE BIRDHOUSE BOARD PS3 TOY'S R US LIMITED EDITION

Tony Hawk experience features larger-than-life gameplay and an innovative motion sensing board controller that gets kids off the couch and into the action.
This is a Limited Edition Tony Hawk SHRED bundle, where the games amazing board controller features one of Tony Hawks custom Birdhouse graphics Boards.
It gives players a head start on honing their over the top skate and snowboarding skills as they explore new game content, the latest news and much, much more.

Check Stock

Waveshare Metal Box (A) Designed for Official Raspberry Pi Compute Module 4 IO Board Comes with Cooling Fan Mini Computer Chassis Robust and Dust-Proof Nice Looking

Designed For Raspberry Pi Compute Module 4 IO Board.ONLY COMPATIBLE WITH Raspberry Pi OFFICIAL IO BOARD.
Make It Easy To Build Your Own Raspberry Pi CM4 Mini PC.
Each Cut-Out Is Completely Aligned With The Connector.
Comes With Cooling Fan, Combined With The Airflow Vent, Better Heat Dissipation.
Binocular Vision, PoE Powered Raspberry Pi Projects, Or Other Industrial Context.

Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..

Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
This shield can make quick work for managing stepper motors in your project..

Check Stock

Supermicro Extended ATX DDR4 LGA 2011 Motherboard X10DAC-O

Support for 3rd Gen AMD Ryzen Processors and future AMD Ryzen processors with BIOS update.
On-board Wi-Fi 5 (802.11ac) with MU-MIMO support it must be wi-fi 6 ax.
AUDIO BOOST 4 technology with NAHIMIC 3 software enhancement for immersive experiences.
FROZR Heatsink with patented fan design – Propeller Blade Technology and double ball bearings.
Pre-Installed IO Shielding is grounded and protects the IO ports from potential electrostatic discharge damage from the external environment.

Check Stock

ESreake Aluminium Plastering Hawk with Soft Grip Handle Plaster Mortar Board Holder Finishing Plastering Tool for Cement Mortar Drywall 11.8 x11.8

Aluminum Blade: The Plastering Hawk blade is made up of aluminium for strength and durability but as well as this it is also lightweight, so not heavy....
Soft Grip Handle: The soft grip sponge rubber handle of the Plastering Hawk ensures optimum comfort and protection from blisters and callus..
Durable: Precision manufacturing controlled by strict quality control measures ensure you get the best Plastering Hawk that lightweight yet extremely....
How to Use: Used for holding plaster, mortar or any other bonding material wit one hand whilst with the other a trowel or other appliance is used in....
Floor thickness: 2mm. Package included: 1PCS *Plaster mortar board..

Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Check Stock

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4：Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
For CM4 & based board：matching with the CM4 on size and mounting holes, fast heat dissipation.
Notched for antenna section：no hindrance to the antenna.
Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
Note: Only HEATSINK,not include base board.

Check Stock