Top Internal Scsi Tape Drives Reviews

SCSI II Cable, Half Pitch DB50 Male to Male, HPDB50(M/M), 25 Twisted Pairs, 28AWG, DB 50 Pin Male to Male Connector with SCSI II Cable, 6 Foot, Beige, CableWholesale

• HIGH QUALITY SCSI CABLE: Our SCSI II cables allow for dependable, high-speed pairing between your computer’s motherboard and a variety of peripheral devices. SCSI II cables, also known as “wide SCSI cables”, are designed to connect older peripherals such as printers and hard drives with newer controllers that surpass SCSI I standards. The connectors are HPDB50 male on both ends..
• HIGH QUALITY COMPONENTS: SCSI II cables are smaller than traditional SCSI cables and offer quicker transfer rates, more secure connections, wider bus paths, and better all-around reliability. Featuring 25 conductors' pairs with gold-plated connectors for high-speed, high-capacity data transfers with Double Shield AL-Foil and Copper Braid to prevent from corrosion, wear and tear..
• COMPATIBLE DESIGN: New computers are expensive enough already without having to replace all of your peripherals with new compatible models. SCSI II cables allow you to make the most of your tech investments by guaranteeing long-term performance and compatibility..
• AVAILABLE IN MULTIPLE LENGTHS: Choose the length that fits your cable requirement. Neither too long to wrap extra wire in a coil, nor too short that fails to reach your connection point. Select the right length to avoid extra clutt....

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

• The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
• It is also known as the "Alterative 2" connector.
• It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
• The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
• It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.

Dell Genuine Adaptec ASC-39320A GC401 FP874 Ultra320 SCSI/LVD Dual PCI-X 320MBps RAID Controller Card Compatible Part Numbers: RT372, F9685, FP874, GC401 Compatible Model Numbers: ASC-39320A

309520-001 - HP Smart Array 6402 Dual-channel SCSI RAID Controller 309520-001

• Smart Array 6402 / 6404 (base board) Ultra320 SCSI controller.
• Has two internal or two external Ultra320 SCSI channels.
• 133MHz PCI-X interface with RAID XOR engine.
• Does not include cache memory module or dual channel daughter board.

EDIMS Internal Mini SAS Cable 36 Pin Mini SAS 4i SFF-8087 Male to 4xSAS 29 SFF-8482 Female for SAS Server, Raid Card,3.3FT

• External Mini SAS 26Pin (SFF-8088) to 4x 7Pin Sata female Cable.
• It has an external 26-pin SFF-8088 male Mini-SAS plug (with release ring) on one end and 4x 7Pin Sata on the other.
• Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA.
• Mini SAS guarantees performance at 3.0 Gigabits per second. This SAS cable features Mini SAS type SFF-8088 connectors and Internal SATA connectors. This cable connects a to SFF-8088 Mini SAS Controller directly to 4 SATA drives.

CABLEDECONN Internal Mini SAS 36-Pin 8087 to SFF-8087 Cable 0.5m

• Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
• Intended primarily for data storage centers the SAS interface is backwards compatible with SATA.
• This allows the user to mix more expensive lower-capacity SAS drives for applications that require faster data access and higher reliability with lower-cost higher-capacity SATA drives for applications with lower access speed requirements.
• 24 hr dedicated email customer support,18 Month worry-free warranty, Lifetime Technical Support.

CableDeconn 0.7M Internal Mini SAS 36-Pin to SFF-8087 Cable - Black

• Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
• Intended primarily for data storage centers the SAS interface is backwards compatible with SATA.
• This allows the user to mix more expensive lower-capacity SAS drives for applications that require faster data access and higher reliability with lower-cost higher-capacity SATA drives for applications with lower access speed requirements.
• 24 hr dedicated email customer support,18 Month worry-free warranty, Lifetime Technical Support.

PC Accessories - Connectors Pro 2-Pack 18 Inches 2 Female Connectors IDC 2x25 50P SCSI Internal Flat Ribbon Cable

• 2-Pack 18" 50P SCSI Cable, 2 female 2x25 50 Pins Connectors.
• Grey flat ribbon cable with 2 of 2x25 50P Black female sockets for 1 Drive.
• Internal SCSI 50-pin flat ribbon IDC cable.

Mini SAS Cable with SATA Power, CableCreation Internal Mini SAS 36 Pin to 4 x 29 Pin Cord with SATA Power, SFF-8087 to SFF-8482 Cable, 3.3 FT

• Please note that this Mini SAS (SFF-8643) to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port.
• Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
• SFF-8643: the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
• Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.

PC Accessories - Connectors Pro 24 Inches 3 Female Connectors IDC 2x25 50P SCSI Internal Flat Ribbon Cable, 24\ SCSI-1 50 Pins

• 24" 50P SCSI Cable, 3 female 2x25 50 Pins Connectors.
• Grey flat ribbon cable with 3 of 2x25 50P Black female sockets.
• Internal SCSI 50-pin flat ribbon IDC cable 50P--12"--50P--12"--50P.

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

• 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
• 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
• 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
• 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
• 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.

EDIMS Mini SAS to SAS Cable Internal Breakout Cable SFF-8087 to SFF-8482 with 4X Molex Power Connectors for Raid Controller to Hard Drive 3.3FT

• Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
• Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
• Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
• Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
• 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.

Micro SATA Cables SCSI HPDB 68 Female to IDC 50 Female F/F Adapter Converter 68 Pin to 50 Pin

• SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
• You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
• The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.