Top Interface Board Reviews

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Beaster Voice Recognition Module with Microphone Dupont Jumper Wire Speech Recognition Voice Control Board for Arduino

  • This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all..
  • This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized..
  • Digital Interface: 5V TTL level for UART interface and GPIO.
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface.
Check Stock

Voice Changer Sound Board, Audio Interface with Audio Mixer and Live Sound Card for Live Streaming, Guitar, YouTube, Recording and Gaming (Microphone not included)

  • 【Multifunctional Voice Changer Sound Board, Audio Interface with Live Sound Card】This Voice Changer Sound Board can be used for Audio Interface, music studio recording, condenser microphone, karaoke, podcast microphone, singing, live stream, TikTok and YouTube streaming, guitar, Facebook, anchor, voice mixing. Warning: This product is only suitable for primary podcasting and mixing effects. If you need more powerful and professional, you need to buy other versions..
  • 【Powerful Mixing function】This Audio Interface with Audio Mixer and Live Sound Card supports 2 microphones with 3.5mm jack input at the same time, and supports Bluetooth input of accompaniment music, which is such a powerful mixing function. And the output can have 3 live ports. It can support, computer, tablet, mobile phone, etc. with multiple devices, multi platform synchronous live broadcast, super powerful podcast Audio Interface with Audio Mixer and Live Sound Card..
  • 【LED Button Light and Multiple Effects, Modes and Gameplay】This Voice Changer Sound Board is equipped with seven different colors of breathing lights. The colorful lights, changing with the music, have the same atmosphere effect as you have a party or a bar. 12 modes, 20 sound effects, dynamic lighting effect w....
Check Stock

Supermicro X9SCA ATX Intel C204 PCH Single Socket LGA 1155 Motherboard

  • Enhanced power supply: On-board 3+1 phase power supply design, 24+4pin DC power supply slot, 4-layer PCB material, can achieve stable power transmission..
  • DDR3 non-ECC memory slot: It adopts dual-channel design and supports up to 2*8GB memory. Supported valid frequencies are 1066/1333/1600MHz..
  • High-definition video interface: This board is compatible with HDMI and VGA high-definition video interface, supports 4K and 1080P integrated display, and PCIe 2.0 X16 slot allows you to have more choices..
  • Multiple expansion interfaces: multi-interface design, strong expansion. Including 1*PCIe 2.0 X16 slot, 1*PCIe X1 slot, 4*SATA 2.0 interface, 7*USB 2.0 interface (6 rear and 1 front) and 1*USB3.0 interface (front). Other interfaces: Onboard 100M LAN network interface and 5.1-channel audio interface..
  • Note: The package includes: 1*H61 motherboard, 1*SATA cable, 1*I/O baffle, 1* original packing box. Currently, there is no driver CD, manual or accessories in the package. All the information of this product can be found in the description and pictures, of course you can also consult us. If you don't know where to download the driver, recommended driver download: Driver Talent..
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

  • VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

Orange Pi Zero 2, 1GB Allwinner H616 Quad Core 64 Bit Open-Source Microcontroller 1000M Ethernet Single Board Computer, Support Android10, Ubuntu, Debian (Zero 2)

  • Orange Pi Zero2 adopts Allwinner H616 64-bit high-performance quad-core Cortex-A53 processor, the sbc has 1GB DDR3 memory specifications, Support 1000MB Network, Run Android 10,Ubuntu,Debian OS Single Board. Orange Pi Zero Expansion board Interface board Development board beyond Raspberry Pi. Note: We will choose efficient logistics to deliver your order and our delivery date generally takes 15 days, Faster than Amazon's suggested date..
  • Orange Pi Zero 2 Mini PC Computer supports decoding of various video formats, such as H.265, H.264, VP9, ​​MPEG -1, MPEG-2, MPEG-4, etc, and the Micro-HDMI output supports 4K display, the GPU has been upgraded to Mali-G31MP2, and supports OpenGL ES 1.0/2.0/3.2, etc..
  • Orange Pi Zero 2 Microcontroller can cooperate with the adapter board through the 13pin interface to expand the functions of earphone + 2*USB 2.0 + TV out + infrared. In addition, the 26pin expansion function port on the board further enriches the functional interface of the main board and improves the development potential..
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
Check Stock

BEYIMEI PCI-E 1 to 6 Riser Card,PCI-E 1X to External 6 PCI-E USB 3.0 Adapter Multiplier Card,PCIE Riser Card for Bitcoin Mining

  • ⭐【Strong scalability】: PCI-E 1 to 6 USB multiplier card, 1 interface can be expanded to 6 PCIE ports, effectively solving the problem of lack of PCI-E interface on the motherboard..
  • ⭐【Note】: The 6 USB ports are PCI-E signals, do not plug in USB devices, otherwise the USB devices and adapter cards will be damaged..
  • ⭐【Efficient】: A cable is directly connected to the interface, effectively reducing interface interference, ensuring data reliability, and improving work efficiency!.
  • ⭐【High stability】: The main control board adopts the PCI-E interface for direct power supply, no external power cord is required, so that the main control board is not interfered by the outside world and has higher stability!.
  • ⭐【Compatibility】: Compatible with PCIE 4X/ 8X/ 16X. System support: Linux/ Win7/ Win8/ Win10/ Win11.
Check Stock

ELUTENG PCIE 1 to 4 Ports PCI Express 16X Slots Riser Card USB 3.0 PCI-E Adapter Board Multiplier Port GPU Extender Miner Riser Card for BTC Bitcoin Miner Mining

  • 【PCI-E 1 to 4 Riser Card】The bus interface is PCI-E X1, and compatible with X4, X8, X16 graphics interface, 1 interface can be expanded to 4 USB3.0 ports, which effectively solves the problem that the lack of PCIe interface on the motherboard. NOTE: The adapter card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals..
  • 【Ultra-Large Aluminum Heatsink】The ultra-large imported aluminum alloy heatsink can effectively dissipate excess heat, so that the adapter card is always at a normal temperature, and the operation is more stable..
  • 【Plug-in Design】The PCI-E riser card adopts a plug-in design, which is directly connected to the motherboard interface for power supply. It can be fixed on the chassis without an extension cable, reducing the number of adapters and patch cords, effectively reducing interface interference and line loss, and ensuring data reliability and stability, improve work efficiency..
  • 【Strong Stability】The main control board adopts the PCI-E interface for direct power supply, without an external power cord, so that the main control board is not interfered by the outside world. 4 USB 3.0 ports can work at the same time, backward compatible with USB 2.0 and USB 1.0, the stability is....
Check Stock

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

AOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR

  • ★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
  • ★Equipped with high-current relay, AC250V 10A.
  • ★The control signal voltage range: the trigger signal is low 0-2V.
  • ★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
  • ★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.
Check Stock

Orange Pi 4B Rockchip RK3399 4GB LPDDR4 Six Cores 64 Bit with 16GB EMMC Single Board Computer, Open-Source Board Support Android, Ubuntu, Debian (Pi 4B)

  • ...ATA and SSD expansion, support for 4K output, etc. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
  • Orange Pi 4B Open-Source Board Built-in SPR2801 (NPU) artificial intelligence processor, with dual-channel 4GB LPDDR4 memory, 16GB high-speed EMMC storage. And it also cited quite rich interfaces, 40Pin headers, headphone interface, camera interface, LCD interface, DC, TypeC, Battery power supply interface, 2* USB 2.0 HOST interfaces, 1* USB 3.0 HOST interfaces, 1* USB 3.0 Type-C interfaces and other high-performance Data transfer and display interface..
  • This development board is based on the Big Little architecture in terms of running speed, it has an independent NEON co-processor, which is widely used in tablet computers, game boxes, drones, Personal Internet mobile devices, VR, advertising machines and other intelligent terminal equipment. The powerful performance configuration will bring milestone changes to cutting-edge technologies such as VR, panoramic shooting, visual recognition, server, and 3D..
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
Check Stock