Top Intercooler Pipe Kits Reviews

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

28'x7'x2.5' Universal Turbo Intercooler with Front Mount Intercooler + 2.5' 12 Pcs Aluminum Bent Pipes + 8pcs Straight Couplers + 4pcs 90 Degrees Elbow Couplers + 24pcs T-Bolt Clamps

  • Ⓞ Made of High quality T-6061 Lightweight Aluminum Piping.
  • Ⓞ Increase 65% Air Flow comparing with other Standard Piping.
  • Ⓞ Package included: 12-Piece Piping Set Includes: 6 X 90 Degree Long-Pipe.
Check Stock

Top10 Racing Air Intake with Cold Side Intercooler Pipe Upgrade Kit Compatible with 2011-2016 Ford 6.7L Powerstroke Diesel 6.7 Powerstroke Diesel F-250 F-350 F-450 F-550 (Blue)

  • Aluminium CNC / Strong durable intercooler boot.
  • Color: Silver Pipe & Black Silicone Boots,Upgrade from factory plastic tube that explodes,Tuning is NOT required.
  • Compatible with: Ford F-250 F-350 F-450 F-550 6.7L Powerstroke Diesel 2011 2012 2013 2014 2015 2016.
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
  • Come with all necessary hardware and clamps,easy Installation,Kit can be installed with basic tools.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

MooSun 2\ 8-Pcs Universal Intercooler Pipe Piping Turbo Polished Aluminum Kit with Silicone Hoses and Stainless Steel T-Clamps

  • Upgraded replacement - this turbocharger intercooler pipe kit features a metal tube to replace a failed plastic original component.
  • Complete kit - includes pipes and clamps needed for repair.
  • Application specific - made to replace the original intercooler hose on certain Ford Super Duty and Excursion model years.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

BOXI Turbocharger Intercooler Hose Assembly For 2003 2004 2005 2006 Dod-ge Sprinter 2500 3500/2002 2003 2004 2005 2006 Mercedes-Benz Sprinter 2500 3500 2.7 L5 DIESEL / 26272 5120147AA

  • This Gates Turbocharger Intercooler Hose is compatible with Dodge Sprinter 2500 2006, 2005, 2004, 2003 2.7L L5 (Intercooler to Engine Cold Side ) and is perfect for a tune up or performance upgrade..
  • ENHANCE PERFORMANCE: The Gates Turbocharger Intercooler Hose features a high-quality silicone cover for extreme temperature resistance in high-temperature conditions. The Gates Turbocharger Intercooler Hose has all the parts including turbocharger hose and 2 correctly fitted T-bolt clamps (where shown) needed to complete your repair.
  • MAXIMIZE SERVICE LIFE: Manufactured with multiple layers of reinforcement, the Gates Turbocharger Hose showcases a specially formulated fluoro-elastomer liner that prevents oil permeation while the T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing. Built to last, Gates manufactures OE-quality hose solutions that comply with SAEJ2050 specifications to help minimize maintenance.
  • RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be ....
Check Stock

Universal 3' 3Inch 76mm Aluminum Turbo Intercooler Piping U-Pipe Kit Silicone Hose Kit with Coupler and T-Clamps DIY Kit

  • ▲ Pipe OD: 3", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm.
  • ▲ Silver aluminum pipe: total lenth=24" or 600mm.
  • ▲ Silicone hose: Made of high quality Silicone, 3-Ply reinforcement.
  • ▲ T bolt clamp: Made of high quality 301 Stainless steel material.
  • ▲ Universal fitment, depending on the size of your Intercooler.
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

Motiv8 CAC Charge Air Cooler Inlet Hose Compatible with Dodge RAM 2500 3500 4500 5500 6.7L Diesel High Pressure Duct | 2 Clamps Included (2013-2018)

  • Direct fit for 2011+ Ford 6.7L Powerstroke.
  • Pipe Construction: Polished Aluminum Pipe Diameter: 2.75" Turbo Section, 3.0" Intercooler Section.
  • CNC-machined factory-style coupling allows for quick install.
Check Stock

Mishimoto MMINT-F2D-08SL Performance Intercooler Compatible With Ford 6.4 Powerstroke 2008-2010 Silver

  • 63mm/2.5" Turbo Intercooler---- Universal Front Mount Turbo Intercooler with 63mm/2.5in inlet diameter. Model: XH-ZL238-SL. 100% brand new, please confirm whether the product is suitable before purchasing.
  • Cooling of Pressurized Air---- The front mount intercooler can reduce the intake temperature of the engine, improve the air exchange efficiency of the turbocharged engine, reduce engine fuel consumption. Excessively hot air will reduce the power of the engine.
  • High Performance---- This front mount intercooler adopts bar and plate design, reasonable structure, professional manufacturing, more stable and reliable performance. Timely replacement of old or damaged turbo intercooler for better cooling performance.
  • High Quality Aluminium Alloy---- The front mount intercooler is made of high-quality aluminium alloy material, which is wear-resistant and durable, not easy to damage and has long service life. The manufacture of the turbo intercooler meets the strict quality requirements.
  • Easy to Install---- Features mounting points at the top and bottom of the intercooler, easy to install. Ideal and direct replacement for old or damaged front mount turbo intercooler, dependable to use.
Check Stock

CXRacing Aluminum Y Pipe Dual 3' to 4' Cold Air Twin Turbo Intercooler Piping

  • CXRacing Aluminum Y Pipe, Dual 3" to Single 4", For Air Intake or Intercooler Piping.
Check Stock