Top Integral Flanged End Reviews

American Standard 0263.212.020 Bathtub, White

  • Acid resisting, enameled steel construction.
  • For those enamored with the look of enamel.
  • The New Solar bathtub is made from heavy gauge, enameled steel for attractiveness and durability.
  • Features include a slip-resistant surface and an integral apron for a cleaner look.
Check Stock

Quicksilver 6.6 Gallon Portable Fuel Tank 8M0045691

  • Diurnal cap and fuel demand valve included.
  • Meets 2011 EPA requirements for pressurized portable fuel tank.
  • High strength, blow molded construction with UV protection.
Check Stock

Huskey Parts Company King Pin Steering Knuckle Bushing Kit for 2004-Up Club Car Precedent Gas Electric Golf Cart 102288201, 102288401

  • Complete King Pin Buhing kit for Club Car Precedent 2004-Up Gas Electric Golf Cart.
  • 4 x Brzone Flanged Bushing. OEM Part Number: 102288201.
  • 2 x King Pin wave washer. OEM Part Number: 102288401.
  • This set of repair kit will do your whole cart..
  • Eliminate Play In Your Front End, Level Out Your Ride, Reduce Front End Sag.
Check Stock

Blackpowder Products Medium Durasight Z-2 Alloy Intregral Ring/Base System for Muzzleloading Rifles (Black)

  • Medium DurasightDescriptionZ-2 Alloy Integral Ring/Base System - Medium (Black) Fits all CVA In-Line Muzzloaders, Traditions In-Line Muzzleloaders, Winchester In-Line Muzzleloaders, and T/C Encore, Omega, Triumph Muzzleloaders. Our Z2 Alloy mounts provide features available on very high-end steel rings and bases. Were so confident in the durability of our scope mounts that they are Guaranteed for Life!.
Check Stock

Marinco 5278 15 Amp 125 Volt 2 Pole-3 Wire Straight Blade Flanged Inlet

  • Eliminates assembly screws from the front of inlets and outlets, creating a cleaner design.
  • Tempered brass, lug style, Perma-Lock design with terminals visible through clear end cap.
  • Mounted in a flanged nylon housing that allows mounting in a panel without access from the rear.
Check Stock

RIDGID - 41608 RIDGID PTEC 30000 Tubular Tailpiece Extension Cutter, 1-1/4\

  • Executes clean, fast and straight cuts on polyethylene (PE), polypropylene (PP), and thin-wall PVC tubes.
  • This cutter automatically deburrs in parallel to the cutting action so there's no need for a second tool to deburr.
  • Automatic beveling allows for immediate, easy joining to other sink drain pieces.
  • The open bore design allows cutting of double-flanged plastic drain pipe.
  • Tubing cutter has a 1-1/4-inch single-flanged or 1-1/2-inch double-flanged outer diameter capacity.
Check Stock

The Drum That Beats Within Us

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

DASBET 17PCS Auto Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing

  • 【Direct use of】：Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings..
  • 【High quality】 : The use of high quality reinforced materials, wear and corrosion resistance, long service life, so that it has a longer peak work rate, I believe it can make your work more relaxed.
  • [Scope of application] : Truck bushing removal, which also includes removing pins and inserting bushings.
  • 【Buy With Confidence】: Lifetime warranty service, once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings.
  • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min) 1 gallon tank with integral conductive low-fluid sensor and positive lock connector.
Check Stock

WJB WS4250 Oil and Wheel Seal Replaces 4250

  • The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
  • Outside ridges of the seal offer a secure and proper fit within the bearing.
  • Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
  • An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
  • Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check Stock

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve.
  • three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
  • tank-less 35 PSI Boost dependent gas water/methanol system.
Check Stock

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock