Top Integral Blade Stabilizer Forging Reviews

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Greneric ttamankua Sword Handmade Samurai Sword T10 High Carbon Steel Burning Blade Tempere Quench Japanese Katana Sharp Fighting (Red)

  • Main feature:This samurai sword is forge by handmade,an ancient forging,We fix two nails on handle that is very firm,you don't worry about it will escape,and disassemble easily.You can collect it at your home,as a gift to your friends or bring to outdoor..
  • Blade description:Blade material is T10 high carbon steel tempered,the blade is tempered with caly and there is faint wave pattern.This retro forging technique makes balde hard,flexbile and smooth.Cutting bamboo,straw mat,fruits and bottle etc easily.But,please be carful when practing and palying..
  • Fittings description:Iron with hollow of Tusba,iron Tusba have high hardness,but it is easy to oxidize and needs to maintenance.
  • black&red of seago,it feels comfortable grip.
  • Product description:Always,we have followed the traditional manualcrafts of Chinese.Material,forge out,tempering quench,polish,grind and device,all by handmade,you can buy with confidence..
  • Size introduction ：Overall length:102cm，handle length (tsuka): 72cm，blade length (nagasa): 27cm，Material of blade：carbon steel，blade sharp: sharpened, blade width: 3.2cm, weight: 1.2kg.
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

15" Long hand forged Damascus steel Hunting Bowie Knife, 2 tone Black Dollar wood with Brass finger guard, Cow Hide Leather sheath with belt loop

  • Overall 15" Long Bowie knife. 9.5" long blade Hand forged Damascus steel blade with 9 Inches cutting edge..
  • 5.5" long Black 2 tone Dollar wood with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Ladder pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

wuder Handmade Katana Sword,Damascus Katana,Japanese Samurai Sword,Full Tang,Battle Ready,Damascus Foldes Steel,Dragon Tsuba

  • Wuder focuses on the manufacturing of Japanese sword and strictly adopts the traditional hand forging method. Every Japanese sword is 100%....
  • And its handle is fixed by two "bamboo nails", which greatly enhances the stability of the sword.The rope of the handle is made of pure cotton and....
  • Process: This rotary threaded folding steel Japanese sword adopts the traditional Japanese forging process where the blade is folded, rotated and....
  • Material:Tsuba is made of pure copper with elegant dragon patterns.Other accessories are also made of pure copper,so there is no need to worry about....
  • Product parameter: 103cm / 40.55in Overall length, 26cm / 10.24in Ches in handle length, 71cm / 27.95in Blade length, 3cm / 1.18in Blade width, 0.7cm....
Check Stock

Knife Making Damascus Steel Blank Blade 7 inches Long Hand Forged Skinning Knife with 3 Pin Hole & an Inserting Hole Space 2.75 inches Cutting Edge 3.5 Scale Space

  • Overall 7 inches Long hand forged full tang Damascus steel blank blade.
  • 2.5 inches long cutting edge. Up to standard Pocket skinning and compact Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Metal Gear Rising Revengeance Limited Edition

  • Wuder focuses on the manufacturing of Japanese sword and strictly adopts the traditional hand forging method. Every Japanese sword is 100% handcrafted. The sword can be given or collected as a holiday gift. We will provide every customer with high quality service..
  • And its handle is fixed by two "bamboo nails", which greatly enhances the stability of the sword.The rope of the handle is made of pure cotton and wrapped manually. It is very tight, sweat-absorbing and skid-resistant, so as not to slip out of your hand. The blade is forged and polished repeatedly using traditional and unique technology. The surface is very smooth..
  • Process: this Japanese sword is made of T10 carbon steel by hot forging, cutting, quenching, grinding, heat treatment, tempering, repair and refurbishment, its blade is fully tempered, processed, repeatedly heat treated and hand forged to remove impurities, and then tempered with clay, so that featured by toughness & flexibility, and produces the real blade grain(Hamon)..
  • Material: Tsuba is made of alloy material with elegant patterns. Other accessories are also made of alloy material, so there is no need to worry about fading and discoloration.The sheath is made of wood and Repeatedly polished and lacquered, with beautiful and de....
Check Stock

16" Long hand forged Damascus steel Hunting Bowie Knife, Bull horn and wood scale with Brass finger guard & Pommel, Cow Hide Leather sheath with belt loop

  • Overall 16" Long Bowie knife. 10.5" long blade Hand forged Damascus steel blade with 9.5 Inches cutting edge..
  • 5.5" long Black Horn and wood scale with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Twist pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

Diablo 6-1/2-Inch x 40-Tooth ATB Precision Finishing Saw Blade Bundle (2-Pack)

  • BUNDLE INCLUDES: Two Diablo 6-1/2-Inch x 40-Tooth ATB Precision Finishing Saw Blade.
  • TiCo HI-DENSITY CARBIDE TOOTH: TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life.
  • LASER-CUT STABILIZER VENTS: Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp.
  • PERMA-SHIELD COATING: Perma-Shield non-stick coating reduces gumming, rusting, and corrosion.
Check Stock

Diablo 6-1/2\ x 24-Tooth ATB Framing Saw Blade with 5/8\ Arbor (2-Pack)

  • BUNDLE INCLUDES: 2 x Diablo 6-1/2" x 24-Tooth ATB Framing Saw Blade with 5/8" Arbor.
  • TiCo HI-DENSITY CARBIDE TOOTH: TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life.
  • LASER-CUT STABILIZER VENTS: Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp.
  • PERMA-SHIELD COATING: Perma-Shield non-stick coating reduces gumming, rusting, and corrosion.
Check Stock