Top Intake Manifold Pressure Sensor Reviews

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Dewhel Turbo Boost Gauge Diesel Boost Bolt Adaptor for Dodge Ram 5.9L Cummins 24V 1998-2007

  • Replaces the Factory Bolt on Intake Manifold Allowing You To Easily Install Your Boost Pressure Sensor.
  • Fit For 1998.5-2007 Dodge Ram With A 24 Valve 5.9L Cummins Motor.
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • ...30/12614969/12616646/12556117/12559798/8125731070/812622300/1S10786/D1846A/12559780/8126166460/1S6713/PS308- commonly found on popular Compatible with Chevy, Buick, and GMC models including years 03, 04, 05, 06, 07, 08, and more.The engine oil pressure sensor or sending unit can be located at the back of the intake manifold, see below for detailed models..
  • 【NOTE】★★If the Engine Oil Pressure Sensor Switch fails simply contact us for a replacement or refund. Please contact us first for any question, we will reply you within 12 working hours..
Check Stock

Nvidiag ELM327 Bluetooth OBD2 Diagnostic Interface Check Engine Light OBDII Code Reader Scan Tool Compatible with Torque for Android Windows, Black

  • ...on not only support ISO9141-2,ISO14230-4 KWP, ISO15765-4(CAN), but also support SAE J1850 PWM,SAE J1850 VPW.
  • ?Car Health Monitor?Display REAL-TIME engine sensor data, including Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure.
  • ?Support Multi Free APPs?Windows PC(ScanMaster-ELM, ScanTool.net, PCMSCAN ELM etc). Android(Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBD, EOBD etc).But Partial Apps need to be charged.Please kindly notice that this automotive obd2 adapter Do Not Support any IOS device..
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number：3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock

Actron CP7802 Vacuum and Fuel Pressure Tester Kit

  • Vacuum and fuel pressure tester is easy-to-read and has a 2-1/2 white face.
  • Checks the mechanical condition of the engine and vacuum control system function.
  • Diagnoses leaks in the intake manifold, manifold and head gaskets, piston rings, valves and vacuum lines.
Check Stock

POSENG LS LS1 LS2 LS6 Intake Manifold with 102mm Throttle Body Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • 1.APPLICATION: For Cathedral Port LS1/LS2/LS6 Heads (for LS 4 bolt intake with cable drive only, not for drive by wire).For Specific Model Compatibility, please check the model list in the description.
  • 2.COMPATIBLE WITH: 1997-2004 Chevrolet Corvette.
  • 1998-2002 Pontiac Firebird Formula, Trans AM.
  • 3.NOTE: This intake manifold works well with 102mm Throttle Body, it can also work with 92mm throttle body (May be loose)..
  • 4.ROBUST PERFORMANCE: Made of 3MM thickness T6061 Sheet Aluminum, stay stable as always..
  • 5.PACKAGE INCLUDES: Intake manifold without rear map sensor port, 92mm throttle body, throttle position sensor (tps), gaskets, hardware, fuel rails, fuel crossover line.Injector not included..
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

  • ...ble marerial to meet or exceed OE standard quality and performance requirements. ✴ The gasket with upgrade materials to ensure a perfect seal with no risk of leaking. ✴ Heat stabilized nylon providing better resistance to cold/hot cycles and further prevent any chances of cracking..
  • ✔ 【PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown..
  • ✔ 【EXCAT MATCH】 Engines: 1.8L/ 2.0L/ 2.4L ✴ 2007-2010 Jeep Patriot, Jeep Compass, Dodge Caliber ✴ 2011-2017 Jeep Patriot, Jeep Compass, Dodge Caliber - 2.4L ✴ 2007-2010 Chrysler Sebring & Dodge Avenger - 2.0L 2.4L ✴ 2009-2011 Dodge Journey Engine - 1.8L, 2.0L, 2.4L (Pls check detailed fitment in the product description below.).
  • ✔ 【OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
  • ✔ 【PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, right parts are guaranteed. If you are not sure about the vehicle fitment or the part ever fails on your vehicle after purchase, please contact us and we’ll take care of it. 30 Days money back and one years replacement warranty ....
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

Blueiceauto ELM327 OBD2 Scanner Bluetooth Auto Car Diagnostic Scanner Code Readers Check Engine Light for Android Torque Software 12V

  • This ELM327 bluetooth OBD2 scan tool support for the extensive third-part apps(such as OBD fusion,Torque pro,Car scanner,Dash command,OBD home and more,scan the QR code on the box?turn you Android phone into a profession engine scanner diagnostic..
  • Bluetooth ELM327 is the newly developed wireless scan tool. Works with OBD2 / EOBD compliant cars and light trucks ,year 1996 or newer in the US, including pickup trucks, hybrid and many electric vehicles,may require special apps..
  • Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL ("Check Engine" light)..
  • Engine, RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel, Trim, Intake Manifold Pressure, Timing Advance, Intake Air, Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor, Voltages, Associated, Short term fuel trims, Fuel System status, Fuel, Pressure..
  • Windows, Android 4.0 or later,Bluetooth ELM327 only supports Android phones. Not for iOS (not for iPhone, for iPad)..
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock