Top Intake Manifold Cleaner Reviews

CATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition

  • Intake Pipe Valve Cleaning Machine -- An advanced equipment (3-Year Warranty) used to deeply remove highly sticky carbon deposits on the engine intake manifold and intake&exhaust valves. Regular carbon cleaning keeps the engine in healthy condition so as to provide high quality power continuously (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).
  • Working Principle of Engine Cleaner -- Close the intake valve and then spray walnut powder into engine intake via air pump, while it will recycle the walnut powder through vacuum. This is a closed loop. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. After thousands of impacts, carbon deposits will be clear thoroughly.
  • Safe & Efficient -- As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion different from a pollution-caused chemical intake valve cleaner.
  • Integrated Design -- Walnut sand can be sprayed and recy....
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

  • Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
  • Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
  • Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
  • Package Contents: 1 Engine Intake Manifold Flap Motor.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit (Studs, nuts, and washers.) , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock

GY6 50CC 49CC Carburetor with Electric Choke for 4 Stroke Scooter Moped 139QMA 139QMB Taotao Engine PD18J Carb with Intake Manifold Air Filter kit

  • GY6 50cc Carburetor with 2-pin Male Electric Choke 18mm Intake Manifold.
  • GY6 50CC Carburetor comes with a #75 Main Jet. upgraded jets for better starting, idling and performance..
  • Size:Intake Manifold Side:18mm(Inner Diameter),28mm(Outer Diameter).
  • Air Filter Intake:35mm(inner diameter),39mm(Outer Diameter) ..
  • This is a 18mm Intake Carburetor,it fits most 4 stroke GY 49CC 50cc 80c 139QMA 139QMB Engine scooters carb, such as Taotao Baja, JMstar, Jonway,....
  • Package include: 1x Carburetor,1x Air Filter,1x Fuel Filter,1x Plug Spark,1x Intake Manifold,2 xGaskets..
Check Stock

DNA Motoring OEM-ITM-021 Factory Style Engine Upper Intake Manifold Replacement

  • Intake Gaskets Molded into the Intake Manifold.
Check Stock

Dokili Aluminum Satin Intake Manifold for Small Block SBC 305 327 350 400 1957-1986

  • 【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
  • 【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
  • 【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
  • 【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..
Check Stock

Engine Intake Manifold with Flow Control Valve Compatible with 2007-2017 Jeep patriot compass/2007-2011 Dodge Caliber Avenger Journey/2007-2009 Chrysler Sebring Replace # 4884495AK 911-902 4884495AH

  • ➤ 【PREMIUM QUALITY BUT LOWER PRICE】 Our intake manifold is designed for high durability and resistance by our strict process standards. We offer original manufacturer quality at lower cost than getting replacement at dealer..
  • ➤ 【IDEAL REPLACEMENT】 This intake manifold directly replaces the original. Perfect fit, easy installation, high reliability.(NOTE❗)This kind of intake manifold with baffle,can't fit for others without baffle. Please kindly check the 5th image as show on..
  • ➤ 【MANUFACTURER PART NUMBERS】4884495AK 4884495AD, 4884495AE, 4884495AF, 4884495AG, 4884495AH, 4884495AI, 4884495AJ, 4884542AC.
  • ➤ 【FITMENT】Compatible with 2007-2010 Jeep Patriot,Jeep Compass 2.0L 2.4L / 2011-2017 Jeep Patriot,Jeep Compass 2.4L / 2007-2009 Dodge Caliber 1.8L 2.0L 2.4L / 2010 Dodge Caliber 2.0L 2.4L / 2011 Dodge Caliber 2.4L / 2008-2009 Dodge Avenger 2.4L / 2009-2011 Dodge Journey 2.4L / 2007 -2009 Chrysler Sebring 2.4l.
  • After installing the Flow Control Valve valve, please wave the manifold baffle by hand to ensure that it can rotate smoothly, and then install the manifold on the car.
Check Stock

OE Style Engine Upper Intake Manifold Compatible with Ford Grand Marquis Muatang Lincoln Town Car 96-00

  • ▶️ Intake Gaskets Molded into the Intake Manifold.
  • ▶️ Direct Replacement for Factory Part.
Check Stock