Top Intake And Exhaust Manifold Stud Kit Reviews

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check Stock

Subaru Exhaust Manifold Stud & Nut Kit WRX STI Legacy Impreza Forester Crosstrek Outback Brz 800910550 902370029 Genuine Oem

  • Stud 800910550 X6 (10x41) Nut 902370029 x6.
  • 1990-2018 Legacy and Outback 1993-2018 IMPREZA 1998-2018 Forester.
  • 2002-2018 WRX 2004-2018 STI 2013-2019 CROSSTREK 2003-2006 Baja.
  • 2013-2019 brz 2006-2013 Tribeca 1992-1997 svx.
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
  • ( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
  • Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
  • Check Before Purchasing - Please check the d....
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • ...ylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cylinder Body BBR Tuning Racing Series 6 Flap Reed Assembly BBR Tuning 21mm OKO High Performance Carburetor Manifold 1x Racing Air Filter 1x Angled throttle cable retainer 1x Slow Jet 1x Main Jet 1x Length of throttle cable.
Check Stock

WPHMOTO Lifan 150cc 4 Stroke Oil Cooled Racing Engine Motor Carburetor Wiring Harness Kit for XR50 CRF50 XR CRF 50 70 Dirt Pit Bike Motorcycle

  • Lifan 150cc engine, 1-N-2-3-4 gear, manual clutch, 4 stroke 4 speed, single cylinder.
  • Max. Power & Corresponding Speed: 9kw(7500±375) / Max. Torque & Corresponding Speed: 11N.M(5000±250).
  • Bore x Stroke: 56.5mm x 59mm / Sprocket: 15T 428 Chain / Shaft size: 17mm.
  • Replacement / upgrade for XR50 CRF50, Kawasaki KX KLX and other most popular dirt bikes.
  • Package include: (1)Lifan 150cc Engine (1)Kick Starter Lever (1)Gear Shift Lever (1)Intake Manifold (1)Manifold hardware kit (1)Carburetor (1)Air Filter (1)CDI (1)Ignition coil (1)Wire harness (1)Clutch Cable (1)Exhaust Muffler (1)Pipe.
Check Stock

JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug | 1.94” Intake / 1.5” Exhaust Valve | 170cc Intake Ports | .475” Max Lift

  • FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines.
  • UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports.
  • PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch.
  • REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation.
  • SPECIFICATIONS: 1.94” intake / 1.5” exhaust valve, 170cc intake ports, .475” max lift, straight spark plug design, 3/8 “ rocker arm studs, 64cc combustion chambers, 1.25” valve springs.
Check Stock

WPHMOTO Lifan 140cc 4-Stroke Racing Engine Motor and Muffler Exhaust With Pipe for XR50 CRF50 XR CRF 50 70 ATC70 Dirt Pit Bike Motorcycle

  • High performance Lifan 140cc engine, N-1-2-3-4 Gear, manual clutch, 4 stroke 4 speed, Shaft size: 17mm.
  • Max. Power & Corresponding Speed: 8kw(7500±375) / Max. Torque & Corresponding Speed: 9.5N.M(5000±250).
  • Replacement / upgrade for XR50 CRF50, Kawasaki KX KLX and other most popular dirt bikes.
  • Easy to hook everything up: Just remove your existing engine and reverse the process to put the new one in.
  • Package include: (1)Lifan 140cc Engine (1)Kick Starter Lever (1)Gear Shift Lever (1)Intake Manifold (1)Manifold hardware kit (1)Carburetor (1)Air Filter (1)CDI (1)Ignition coil (1)Wire Harness (1)Exhaust Muffler Pipe(1)Clutch Cable.
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock