Top Insulation Piercing Connection Reviews

Goupchn Multimeter Test Leads Kit Back Probe Set with Replaceable Probes Set Banana Plug to Test Hook Leads Alligator Clips and Wire Piercing Probes for Electrical Testing Automotive Diagnostic

...ner spring short needles, 2PCS banana to test hook wires, 15PCS back probes set, 5PCS insulated alligator clips to banana male, 5PCS banana female to female connector, 5PCS piercing probes with sheath, 5PCS lengthened wire piercing probes, 2PCS 4mm male to 2mm female adapters, 2PCS heavy duty alligator clamps, 2PCS insulation piercing probes, A six accommodating position folded package..

Check Stock

OIIKI 4Pcs 0.7mm Test Probe Pins Non-Destructive Insulation Wire Piercing Needle Stainless Steel Back Probe Pins Super Tip Multimeter Probes for Banana Socket Plug Car Tester Black&Red

Connection Model: The test probe fits for standard 4mm Banana plug test lead, it works with most test lead kits in the field, diagnostic devices and automotive testing and repair..
The test probe makes it easier to check circuits and piercing the insulation of wires, very handy tools for back probing of automotive electrical measurements..
Length: about 3.27inches (83mm), Probe pin size: about 0.86inches (21.8 x 0.7mm), Pin material: stainless steel..
Wide application: The test probe applications include automotive, industrial, electrical and more, which could perfect fit on many multimeter connectors..
Package included: 2 × black test probe pin, 2 × red test probe pin..

Check Stock

Refrigerator Freon Recharge Kit, AC Recharge Kit, R134a/R-12/R-22 Refrigerant Charging Hose with Gauge, Include BPV31 Bullet Piercing Tap Valve Can Top for Home AC Refrigerant System

【PACKAGE INCLUDE】: R134a charging hose (with Gauge ) + BPV31 Piercing Valve for Bullet..
【R134A CHARGING KIT】: This item will not work with the New Style 134a cans. 9" hose with R-134a Can to R-12/R-22 service port connection, 1/4" end fits R12, 22, 502 fittings. And the gauge has scale readings for R134, R12, & 22..
【BPV31 PIERCING VALVE】: Piercing valve compatible with Bullet BPV31,it's for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
3-In-1 Line Tap Piercing Valve fits 3 different sizes of tubing: 1/4", 5/16" and 3/8". The product is not sponsored or endorsed by Bullet.
【PREMIUM QUALITY】: The replacement part made of corrosion resistant metal and well-tested by the manufacturer..
【MONEY-BACK GUARANTEE】: For any reason you're not satisfied, please contact us and we'll provide you a new replacement or full refund..

Check Stock

gohantee R134A Refrigerator Freon Recharge Kit- with BPV31 Bullet Piercing Tap Valve, Piercing and Self-Sealing Can Tap for R134a Air Conditioning, Include R134a Low Side Quick Couple

[WIDE APPLICATION] The air conditioning refrigerant auto ac recharge kit with gauge fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning..
[R134A CHARGING HOSE] 58 inch hose with gauge scale readings for R134, R12, and 22. Hose rated 3000 psi burst pressure and 600 psi max working pressure. 1/4 inch female SAE service port connection fits R12, 22, 502 fittings..
[BULLET PIERCING VALVE] BPV-31 bullet piercing tap valve Replace part No: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
[CAN TAP] Two can taps were equipped with piercing and self sealing style bottle which help to compatible with most can valves. Piercing can tap: 1/2″, Self sealing can tap: 7/16 28unf..
[SERVICE GURANTEE] Package include: 1Pc x R134A Air Conditioning Refrigerant Charging Hose with Gauge, 1Pc x piercing can tap, 1Pc x self sealing can tap, 2Pcs x bullet piercing valves with L keys, 1Pc x R134a Low Side Quick Couple. If you have any concern, feel free to contact us..

Check Stock

Multimeter Test Lead Kit, Replacement Test Lead Set Automotive Multimeter Probe Tips Accessories Kit, Alligator Clips Replaceable Volt Clamp Meter Leads Electronic Test Leads

【Multimeter Test Leads】:Lead test kit Good Conductivity, Banana plug is made of high quality copper, durable, multi-purpose testing leads.safety ratings up to CAT III 1000 V..
【Premium Test Leads Kit】The replaceable gold-plated multimeter test probes, alligator clips, test hook and back probe pins can be used in different measurement environments such as industrial, electronics, home and automotive..
【Mini Grabbers Hook】: Mini grabber test hooks are made of copper alloy. High quality, strong electrical conductivity, firm and difficult to bend and deform.has a retractable clip hook and an extension lead which provides safe and secure connections for clamp and any terminal block..
【Insulation Piercing Clip Test Probe】:PVC-insulated, right-angle test leads. Grip the conductor to provide a more secure, hands-free connection than probe tips connections that may need to be left in place..
【 Quality guarantee】:A universal multi meter plug-in, stable measuring reaction times,Max years of experience in the production of multimeter accessories..

Check Stock

AideTek Automotive Test Lead Kit Insulation Piercing test clip TLP20160

Two( One red + one black) 32 inch PVC lead extensions, Shrouded banana plugs at both ends, Whole length: 82cm (32.22 inch).
A pair of sharp Stainless Steel Needle Tipped Tip Multimeter Probes Test Leads.
Two ( one red + one black) modular 4 inch heavy duty test probe handles.
A pair of one Black/Red large crocodile clips, Safety Sliver plated alligator clip Rated voltage/current: CATIII 1000V/Max.32A, Metal material：Brass.
whole size: 83.5mm(3.3 inch) max jaw size: 27mm(1.06 inch).
Insulation Piercing Clip Set, Banana Jack Accepts Banana Plug Leads with rigis insulation sleeve, Color: Red, Black, Length 4 In" (143cm) , Stainless Steel Probe Pierces Insulation on Gauge Wire, Tip Material Stainless Steel, For Use With Banana Plug Test Leads, Accepts 4mm Banana Plugs, Includes (1) Red and (1)Black Probe.

Check Stock

Yaegoo R134A Charging Hose to Refrigerator with Gauge, AC Refrigerant Recharge Hose Kit Piercing Tap Valve Kit Connect Can of R134a, R12/R22 Refrigerant Port

【High Quality】 Made of sturdy and corrosion-resistant metal it is rust-proof and durable and can be used for a long time, a high quality replacement part.
The freon charging hose adopted quality rubber material, high pressure resistance, reliable and safety..
【R134A Charging Hose】 16inch hose with R-134a Can to R-12/R-22 service port connection, for home use refrigerator, A/C system adding refrigerant. Come with gauge for easily viewing during use, and the gauge has scale readings for R134, R12, & R22..
【Piercing Valve】Bullet Piercing Tap Valve Kits Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, include: 1 valve ,1 Hex Key, 2 Adapters.
【Easy To Use】You only need a hex key wrench (included) to install this part.
Its compact design only requires 2 inch clearance area for installation and use..
【Package Included】1 Pcs R134a Charging Hose With Gauge, 1 Set R12 R22 to R134a Conversion Kit, 1 Pack Bullet Piercing Tap Valve Kits (Each kit including 1 piercing valve, 1 hex key, 2 adapters)..

Check Stock

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..

Check Stock

A/C Retrofit Valve with Dust Cap Converts R12 to R134a Fit 7/16 Inch Low Side Port BPV-31 Bullet Piercing Tap Valve Adapter R1234YF to R134A

Package includes: you will receive 2 pack valve adapters (low side and long side), 1 pack R1234YF quick coupler, 1 pack BPV-31 bullet piercing tap....
Quick adapter: adjustable high and low side connection R134a quick coupler connection to R1234yf , R134a to R1234yf, ideal conversion kit for AC....
R1234YF quick coupler: fit for R1234YF/ R12 to R134A car air-conditioning AC charging, it has strong construction to ensure highly working....
BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Compatible with: compatible with 1/4 inch,....
Universal retrofit valve: the retrofit valve converts from R-12 to R-134A air conditioning system and suit for 7/16 inch low side port.

Check Stock

Mudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap

... design that only requires a 2-inch clearance area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
Suit for vehicles pre-1994, comes with R-134a refill fittings.

Check Stock

CESFONJER Scotch Lock Wire Connectors Set | Crimp Insulated Electrical Terminals | Quick Splice Connectors | Splice Connectors Electrical | Red 20 Pcs Blue 20 Pcs Yellow 15 Pcs

★Multifunction: The scotchlok connectors widely used in the wire connection of automotive, motorcycle and home wiring projects.
★Easy To Use, Practical And Safe: Quick splice fast wiring without stripping or soldering. Simply insert the wires and squeeze with pliers, then a reliable and secure connection is done, very fast and light. Safety insulation stamped design, two-pin lock connection reliable and secure, no loose, lightweight and beautiful appearance, insulation, resist high voltage..
★Material: plastic + metal, the color of the corresponding specifications: red: 22-18AWG/0.5-1.0mm, blue: 18-14AWG/0.75-2.5mm, yellow: 12-10AWG/4-6mm..
★Comes with storage box：Scotch Lock Wire Connectors Set has different colors allow you easy to identify and choose quickly, ul listing please view the picture on this listing.
★Safety insulation design：Quick splice connectors Easy to use, snap over lock on the top to keep them well insulated prevent from leakage, T Tap connectors to prevent sliding out.

Check Stock

R134A AC Recharge Hose with Gauge and BPV31 Bullet Piercing Tap Valve Kit, 1/4" to 1/4" Adapter with valve core, R134a Can Tap, 1/4’’ SAE Hose for R12 R22 Port, for Air Conditioning Refrigerant System

❥【R134A CHARGING HOSE】The R134a Charging Hose is 19" with 2.75“ Air Conditioning Gauge, R-134a Can to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings. And the gauge has scale readings for R134, R12, & 22..
❥【BPV31 PIERCING VALVE】BPV31 Piercing Valve ( Not OEM）for HVAC System, 3-In-1 Line Tap Piercing Valve for Bullet, Fits 3 sizes of tubing: 1/4", 5/16" and 3/8", include: 1 valve ,1 Hex Key, 2 Adapters.
❥【ADAPTER]】The 1/4 to 1/4 Adapter with valve core, fits for Mini Split System Air Conditioners, HVAC and Refrigeration..
❥【PREMIUM QUALITY & EASY INSTALLATION】 The replacement part is made from durable high quality material and well-tested by the manufacturer. You just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, and can effectively avoid accidental discharge of refrigerant..
❥【SALES SERVICE】The R134a Charging Hose kit has 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..

Check Stock

VViViD Cork Board Natural Textured Vinyl Wrap Roll (16" x 10ft)

Self-healing fine grained cork in a convenient roll!.
Resistant to piercing, indentation and scratching.
Create your own cork boards in custom sizes, or use in countless other craft projects!.
Pin up reminders, schedules, to-do lists, and photos, in the home and office..
Can be used as sound insulation, both as a wall covering and a floor underlay..

Check Stock