Top Insulation Displacement Tool Reviews

45 Amps Anderson Connectors, PP15 to 45, Red and Black Housing, w/10-14 AWG Heavy Duty Contact, 600V (Pack of 12 Set)

  • 3-wire insulation displacement connector to add or terminate a telephone line.
  • Thick 50 mico-inch gold plating on all contact surfaces.
Check Stock

8 MOTORCRAFT IGNITION COIL DG508 FORD 4.6L 5.4L 6.8L V8 V10 ENGINE

  • Set of 8 Motorcraft Ignition Coil DG508, packaged into one for easy and efficient delivery. The stock manufacture’s part numbers will always be engraved on each coil.
  • Tested under extreme vehicle and environmental conditions.
  • Radio frequency suppression helps minimize electronic noise.
  • Internal “insulation displacement connection” is designed to make high-reliability internal connections.
  • Guaranteed to operate properly with your Ford, Lincoln, or Mercury vehicle.
Check Stock

10 FORD MOTORCRAFT IGNITION COIL DG508 FORD 4.6L 5.4L 6.8L V8 V10 ENGINE

  • Set of 8 Motorcraft Ignition Coil DG508, packaged into one for easy and efficient delivery. The stock manufacture’s part numbers will always be engraved on each coil.
  • Tested under extreme vehicle and environmental conditions.
  • Radio frequency suppression helps minimize electronic noise.
  • Internal “insulation displacement connection” is designed to make high-reliability internal connections.
  • Guaranteed to operate properly with your Ford, Lincoln, or Mercury vehicle.
Check Stock

Master Plunger MP1600 1.6 Gallon Low Flush Toilet Plunger with Funnel Nose Design, Black

  • The Master Plunger 1600 was designed for low flush/low volume 1.6 gallon toilets.
  • This unique tool has a powerful 8 cup water displacement to take care of the toughest clogs, fast.
  • MP1600’s extended funnel nose design ensures a 90 degree bend for a great seal on your standard and elongated toilets. Prevents slippage and splash back..
  • Made in U.S.A with high quality material.
  • Master Plunger - the original bellows plunger, get the best most effective hand held unclogging tool.
Check Stock

Tune Up Kit compatible with 2014 Ford F-150 5L-V8 Ignition Coil DG-542 Spark Plug SP-548 FA1883

  • Set of 8 Motorcraft Ignition Coil DG508, packaged into one for easy and efficient delivery. The stock manufacture’s part numbers will always be engraved on each coil.
  • Tested under extreme vehicle and environmental conditions.
  • Radio frequency suppression helps minimize electronic noise.
  • Internal “insulation displacement connection” is designed to make high-reliability internal connections.
  • Guaranteed to operate properly with your Ford, Lincoln, or Mercury vehicle.
Check Stock

Wiha 32292 Insulated Nut Driver Set, Inch, 1000 Volt, 5 Piece

  • Ergo molded insulated cushioned grips, 1000 volt tested.
  • Each tool individually tested for insulation integrity.
  • Handle and insulation molded on for maximum durability.
  • Super hardened and tempered for long life performance.
  • Drivers precision machined for a perfect fit.
  • Insulated 1000 volt rated, 10,000 volt tested.
  • Each tool individually tested for insulation integrity, ISO quality.
  • Meet ASTM F-1505, IEC 900,VDE 0680, NFPA 70E.
Check Stock

Digital Resistance Ground Earth Tester UT501A 1000V Insulation Resistance Tester Earth Ground Resistance Earth Ground Resistance Meter Multimeter Voltmeter Earth Resistance Tester

  • MULTI-FUNCTIONAL MULTI-METER INSULATION TESTER--This insulation resistance tester can measure insulation resistance, AC voltage, etc.
  • HIGH ACCURACY AND STABLE PERFORMANCE DIGITAL EARTH RESISTANCE TESTER--High degree of accuracy, stable performance, easy operation and reliability.
  • MULTI-FUNCTIONAL AND ECONOMICAL SUPPORTS EASIER OPERATION--Support automatic measurement, low battery indication, LCD backlight, alarm light display, alarm buzzer.
  • WIDELY APPLICATIONS FOR DAILY USE--Widely used for insulation resistance measurement for insulation materials and various kinds of electric equipments such as transformer, electric machines, cables, switches, electrical appliances.
  • IDEAL TOOL FOR ELECTRICAL EQUIPMENT TESTING AND INSPECTING--It is a ideal tool for electric equipment maintenance, testing and inspection.
Check Stock

AIRIC 120PCS T Tap Wire splice Connectors 22-10 Gauge Electric Wire Terminals Self-Stripping Nylon Fully Insulated Male Quick Disconnects Spade Terminals Kit

  • The Quick Splice Connectors Set includes Nylon T-tap Quick Splices and Nylon Fully Insulated Male Disconnectors..
  • This Wire Connectors Use the Male Quick Disconnect for Easy Safe Splicing into Wires..
  • Convenient Connectors: Use Insulation Displacement Technology to Make in-line Splices Without Previous Stripping, Pass Through Connections as well as Pigtail and tap Splices..
  • Insulated Connectors Kit with Lock Ensures the Reliability of Connection..
  • Quality Guarantee: UL Approved & 30 Days Unconditional Refund..
Check Stock

IWISS Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP TYCO Deutsch Terminals Crimper, Molex Crimping Tool,24-14 AWG

  • Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

IWISS IWC-1424A Crimping Tools for Deutsch DT Series Stamped & Formed Contact, Open Barrel Terminal Crimping Tool, AWG14 to AWG24 Wire Crimper

  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: IWC-1424A is also designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWC-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

Wiha 32091 5-Piece 1000-Volt Slotted and Phillips Insulated Screwdriver Set

  • Wiha tools are made to ISO quality standards..
  • Wiha has been making Premium Tools For Over 60 Years.
  • Each tool individually 10,000 tested for insulation integrity, ergo molded insulated cushioned grips, 1000-Volt rated.
  • Handle and insulation molded on for maximum durability.
  • Exact fit precision machined tips, Wiha special CRM-72 tool steel blades.
Check Stock

ALLEX Insulation Knife Wood Handle Japanese Stainless Steel 8 Inch Long Cut Insulation and Styrofoam Cutter with Sheath Serrated Sharp Duct Knife Tool Made in JAPAN

  • Utility Insulation Cutting Tool: Utility Insulation Cutting Tool: It is an easy-to-use Japanese insulation cutter. This versatile knife is ideal for....
  • Razor Sharp Japanese Steel: The blade uses Japanese high-grade stainless steel. The excellent sharpness of the Japanese steel knife minimizes chips....
  • Long and Serrated Blade: The 8 inch long blade can cut even large-sized and pipe shaped insulation materials. It has a unique wave blade edge....
  • Safety Blade Case: It comes with a blade cover that is convenient for safe carrying. You can also store it safely at home or in your workplace..
  • Overall Length: 13-3/4" / Blade Length: 8" / Blade thickness: 1.5 mm / Weight 5.64 oz / Made in JAPAN.
Check Stock

YOTENKO N Male to RP-SMA Male Lora Antenna Cable Reverse SMA N Male Pigtail 10M Low Loss for Receiver,3G/4G/LTE/GPS/Hotspot/WiFi Router/WiFi Extender/to Antenna

  • √ 1. Product Type: High quality and new rainbow color flat ribbon idc wire cable.
  • √ 2. Package Include: Set include 10/14/16/20 wire, each 10ft / 3m, total 40ft / 12m.
  • √ 3. Pitch: 0.05" (1.27 mm) Center Spacing for 2.54mm Connectors.
  • √ 4. Product Feature: Cable with a variety of colors makes it easy to separate, different specifications in a kit to meet your needs.
  • √ 5. Application: It is perfect for use with insulation displacement connectors (IDC) such for 2.54mm Connectors.
Check Stock