Top Insulated Control Cable Reviews

CREWORKS Automatic Wire Stripping Machine for 0.06\-1\ Copper Wires, Motorized Wire Stripper Tool for 7/0-15 AWG Scrap Electrical Wire Recycling, Electrical Tool for DIY Cable Copper Wire Stripping

Wire Stripper and Crimper 2-Piece Tool Kit includes everything a tradesman needs for insulated terminal crimping, wire stripping and cutting.
Ratcheting Crimper (Cat No. 3005CR) crimps only insulated terminals onto 10-22 AWG stranded copper wire.
Adjustable compound action design puts more crimping power into each squeeze.
Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) insulated terminals.
Wire Stripper and Cutter (Cat. No. 11061) with stripping head that adjusts to strip: 10-20 AWG solid, 12-22 AWG stranded, and 12/2 and 14/2 Romex cable (all sizes) and other nonmetallic (type NM) sheathed cable self adjusts.
Adjustable stopper to control the length of the core strip.
Tensioning thumb wheel allows for precise stripping of smaller gauge wire.

Check Stock

T TOVIA Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 300 Amp

Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
Round DMC head provides increased visibility, and allows rod to be burnt to the end.
Insulated rubber handle with copper core for both high conductivity and improved cable connections.
The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.

Check Stock

3 Wire Connectors, ConnectOzo Electrical IDC 314-BOX - Box Self-Stripping Pigtail Connectors, Moisture Resistant & Flame Retardant, 600V Nylon Insulated Connectors for 22-14 AWG Cables (50)

Independently crimps the barrel and grip on insulated and non-insulated terminals and connectors.
Use for control circuits, fixtures, appliances, signals, PA systems and automotive/marine/RV wiring.
Accommodates 18 to 14 AWG solid/stranded copper.
UL Listed as a Pressure Cable Connector per UL486C and is RoHS 2011/65/EU Compliant.

Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

Welding rod holder Accepts rods up to 5/16''.
Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..

Check Stock

IRWIN RATCHETING PVC CUTTER 1.5' CAPACITY

【Note】Not suitable for cutting steel cores, steel wires, steel cables, and iron wires. Equipped with 1000 volt insulated handle, but for your safety, please do not cut live cables! The quick release lever can open the blade during operation, and use the safety lock to fix the product after use..
【Cutting range】The heavy-duty ratchet cable cutting machine is mechanically designed ,It is forged blade which can easily cut ordinary copper-aluminum cables, single-stranded and multi-stranded cables ≤240mm² (AWG ≤ 600MCM)..
【Unique design】High quality-ratchet cable cutter is made of carbon steel, wear-resistant, not easy to break, and not rust. The ergonomic cable handle can be adjusted by the ratchet action to control the connection force of the handle. It is easy to operate and more convenient to cut the wire, ensuring comfort and reducing fatigue during wire cutting..
【Convenient application】 Product model: WX-325A. The ratchet cable cutter has a simple and compact structure and a high-quality non-slip handle. It allows you to cut cables in narrow areas where other cutting machines fail, making it more convenient to use..
【100% Satisfaction Gurantee】60 DAY MONEY BACK GUARANTEE ensures your satisfaction. If you aren't impressed w....

Check Stock

Custom Cable Connection 14/4 SOOW 14 AWG 4 Conductor 600 Volt Portable Power Cable - 25 Foot

...se alter the performance of wire or cable. SOOW Portable Cord is UL-approved for permanent installation is often used in new construction and other applications where the wire will not need to be removed..
FULLY ANNEALED STRANDED BARE COPPER: 14 AWG fully annealed stranded bare copper conductors per ASTM B-174. Insulated conductors (red, black, green, white) are cabled with fillers as necessary to make round, a separator is applied over the assembly. Insulation Thickness 0.045 inches. Outside Cable Diameter 0.575 inches. The overall jacket of this cable is a black, oil-resistant thermoset compound per UL 62.
CUSTOM CABLE CONNECTION QUALITY: Here at Custom Cable Connection, we are family owned and have been in business since 2002. We have made it our mission to provide high-quality audio, video, network, and RF cable assemblies as well as OEM products for our loyal customers. We manufacture in-house as often as possible with US-sourced products..

Check Stock

Southwire 58277740 Tools & Equipment CCPR400 Heavy Duty Compact Ratcheting Cable Cutters, Steel Blades, 750 kcmil CU/1000 kcmil AL & KNIPEX Tools - Dismantling Knife, 1000V Insulated (9855)

Product 1: DURABLE ratcheting cable cutters perfect for cutting up to 750 kcmil copper and 1000 kcmil aluminum cables.
Product 1: MINIMAL CABLE DISTORTION: Hardened steel blades ensure consistent cuts and long-term durability.
Product 1: REPLACEABLE BLADES provide long lasting cutting of copper and aluminum wire.
Product 1: QUICK-RELEASE lever opens blade at any time during operation.
Product 2: Dismantling Knife-1000V Insulated.

Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..

Check Stock

uxcell 150Pcs SV5.5-5 Insulated Fork Spade U-Type Wire Connector Electrical Crimp Terminal 12-10AWG Yellow

【FEATURE】- When the insulated terminals are closely spaced from each other, it can improve the safety of insulation, prevent the bifurcation of the wires, and make it easier to insert the wires into the plug..
【ADVANTAGE 1】- The Copper Crimp Connector's shell is made of PVC, with insulation and flame retardant, high safety and good protection performance.
【ADVANTAGE 2】- Electrical Crimp Connector's Pin made of metal, tight contact and good conductivity.
【APPLICATION】-Insulated fork terminals widely applied in electric and electronic industry, electric equipment, Industrial automation, street lighting and power control system in traffic and transportation, posts and telecommunication, petrol chemical industry, industrial building machine-building, etc..

Check Stock

Morris Products 12034 Piggy Back Disconnect Double Crimp Nylon Fully Insulated Blue 16-14 Wire Size 0.032 X0.250 NEMA Tab Pack of 100

HIGH-STRENGTH CONSTRUCTION: Each nylon fully insulated double crimp piggy back disconnect in this pack of 100 is manufactured from high-strength brass and electro-tin plated for corrosion resistance..
COLOR CODED: Enhance identification with these nylon fully insulated double crimp piggy back disconnects that are color coded in red or blue and available with 16-14 or 22-16 wire sizes..
EASY ENTRY: The nylon insulation of these nylon fully insulated double crimp piggy back disconnects help to eliminate strand hang up, ultimately increasing crimping rates and offering mechanical strain relief..
BULK PACK OF FEMALE DISCONNECTS: Easily stock up on all the tools you need for residential or commercial electrical jobs with this 100 pack of nylon fully insulated double crimp piggy back disconnects equipped with a butted seam on the terminal barrel..
COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..

Check Stock

52pcs Cable Clamps Assortment Kit 6 Sizes 1/4\ 3/8\ 1/2\ 5/8\ 3/4\ 1\ Cable Clamps Rubber Cushioned With Screws 304 Stainless Steel R Style Pipe Clamps Assorted Cable Wire

MATERIAL: Clamps are made of 304 Stainless steel material and high quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable..
QUANTITY: 12pcs 1/4" (6mm), 10pcs 3/8" (8mm), 8pcs 1/2"(13mm), 8pcs 5/8"(16mm), 8pcs 3/4"(19mm), 6pcs 1" (25mm) and 25pcs Screws M6x20mm. Cable clamp screw hold diameter: 6.5mm, suitable for 6M( 1/4'') screw bolts and nuts to thread.
STYLISH DESIGN- The R-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install..
APPLICATION：Cable clamps assortment kit are perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration..
ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place..
3/4 pipe repair clamp pipe clamp tools pipe clamp tools pipe clamp pipe clamp 1/2 steel cable clamp 1/4 cable clamps 16mm cable clamp 3/4 cable clamp 3/8 cable clamp 3/8 insulated cable clamp cable clamp 1 cable clamp assortment cable clamps 1 inch cable clamps 1/2 cable clamps 3/4 inch cable clamps assortment kit insulated cable clamp lokman cable clamp 3/8 metal cable clamp 3/8.

Check Stock

Welding Arc Welding Electrode Holders 300Amp Copper Heavy Duty Jaw Welding Rod Holder Plier Clamp of Welding Machine Materials for Arc MMA/Stick, Black

Great for most Arc, MMA, Hand Stick welding jobs.
Arc welding electrode holders with a comfortable insulated handle and easy to operate..
Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
High quality electrode holder is with highly conductivity and improved cable connections..
Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..

Check Stock

Woodhead 35970 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 5.00\ Mesh Length, .25–.36\ Cable Diameter

Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
Specifications: flexible eye grip measures 5 in. in mesh length and works with 0.36 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..

Check Stock