Top Insert Nut Reviews

Prime-Line 9074800 Nylon Insert Lock Nuts, #4-40, Grade 2 Zinc Plated Steel, (50-pack)

  • Nut Type: Hex Locknut with Blue Nylon Insert.
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
  • Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..
Check Stock

Fix My Hog — Your Kick Start To Harley Davidson Maintenance — Touring Edition — 2 DVD SET == Twin Cam & Evolution

  • Fitment: For Most Harley Touring/Softail/Dyna/Sportster Models..
  • Material: made of Zine-alloy,rust-resisting,a sleek look waterproof and long service life..
  • Note:If fender has a plastic plug not a nut insert, Please remove plug and use nut kit to mount..
  • Easy Install:Replace your rear seat/Solo Rack bolt nut Base.Perfect replacement for nut..
  • Package Include:1* seat bolt and 1* nut kit..
Check Stock

Qty 20 M3 3mm M3-0.5 Brass Threaded Metal Heat Set Screw Inserts for 3D Printing

  • ➨ Pack of 20 (Twenty) threaded inserts - great for restocking one of our insert assortments..
  • ➨ These create much more convenient and professional parts than using "captive nuts" (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work..
  • ➨ These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond..
  • ➨Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money..
  • ➨ These are threaded M3-0.5 with an overall length (OAL) 3.85mm Outer diameter at the top (wider end) is 5.6mm, bottom is 5.12mm Hole size in your product should be slightly smaller than the insert, to allow plastic ....
Check Stock

LENOX Tools Screwdriver, 8-in-1 Ratcheting (LXHT60902)

  • Accepts Standard Bits: Magnetized bit holder is compatible with insert bits and power bits for convenient replacement..
  • Ratcheting: Allows the user to turn the driver without stopping to adjust wrist position..
  • Optimized Grip Zones: Heavy texture mid-zone provides maximum torque. Low texture base zones provide speed and precision..
  • Sizes Included: PH #1, PH #2, T25, SQ #2, SL 8-10, 1/4'' Nut Driver, 3/8'' Nut Driver, 5/16'' Nut Driver.
Check Stock

Stainless Steel Rivet Nuts Kit #8-32#10-24 1/4\-20 5/16\-18 3/8\-16 Threaded Insert Nutsert Rivnuts

  • Stainless Steel Rivet Nuts Threaded Insert Nutsert 77 pcs 5 Sizes #8-32 #10-24 / 1/4"-20 / 5/16"-18 / 3/8"-16 Rivnuts..
  • 20pcs stainless steel 1/4-20 rivet nuts + 20pcs stainless steel 10-24 rivet nuts + 20pcs stainless steel 8-32 rivet nuts + 10pcs stainless steel 5/16-18 rivet nuts + 7pcs stainless steel 3/8-16 rivet nuts..
  • Thread size: rivet nut 8-32, rivet nut 10-24, rivet nut 1/4-20, rivet nut 5/16-18,rivet nut 3/8-16..
  • Application: rivet nuts for automotive, furniture, decoration and other electrical and industrial products..
  • Package comes with clear plastic box for easy storage, compartments with product labels (8-32, 10-24, 1/4-20, 5/16-18, 3/8-16) for easy distinguish..
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

  • 1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws..
  • Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm..
  • Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided..
  • In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place..
  • In very Harder wood such as white oak or maple, drill a hole size (3/8.
Check Stock

POROHOM 12 PCS Trampoline Screws, Long Screw Trampoline Replacement Parts,Anti-Loose Trampoline Bolts and Nuts,Trampoline Accessories Trampoline Stability Tool- 3 in

  • Application: The trampoline screws are compatible with many different trampoline brands. The installation of long screws on the trampoline can make the trampoline more stable and not easy to shake..
  • Package Includes: 12 x Trampoline Screws, 1 x open wrench. Important note, Nylon lock nuts are used in our trampoline screws kits, and Nylon Lock Nuts Use the matching wrench to tool to screw in..
  • Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
  • Compared with the bolt heads of other brands of trampoline screws, the square shoulder underneath the rounded head is unique because this design can resist rotation when the nut is removed or tightened..
  • Wide Range Of Uses:The 12-piece bolt and nut set can be widely used in trampolines, cribs, bunk beds, chairs, cabinets, workbenches and other furniture.
  • it can also be well connected to wood, headboards and cabinets..
Check Stock

M8-1.25 Serrated Flange Nylon Insert Lock Nuts Flanged Locknuts, 304 Stainless Steel 18-8, Bright Finish, 10 PCS

  • Features an internal nylon ring that grips bolt threads better than a standard finished nut.
  • Great for use in applications where the bolt may be subject to vibration.
  • Can also be used as a secondary nut to help lock the main nut in place.
  • The side with the nylon insert should face towards the tip of the bolt, not towards the surface being fastened.
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

VIGRUE 450pcs M3 M4 M5 M6 M8 Acorn Hex Cap Nuts and Nylon Lock Nut and Serrated Flange Hex Lock Nuts Assortment Kit, 304 Stainless Steel, Bright Finish

  • ✅Nut Type: This nut set totals 450pcs, 137pcs Acorn Hex Cap Nuts, 170pcs Nylon Lock Nut, 140pcs Flange Hex Lock Nuts, 5 Nut Sizes: M3 M4 M6 M6 M8, great fasteners for professional users and DIY projects..
  • ✅HOLD Screws Firmly: Nylon Lock Nut with a nylon insert inside, the lock nuts greatly reduce loosening vibrations and torque. Flange Nut serves to distribute the pressure of the Nut over the part being secured, reducing the chance of damage to the part. The Acorn cap nut is a hex with an enclosed dome and it is partially internally threaded, can play a good role in decoration and to prevent being threaded scrape..
  • ✅High-Quality Stainless Steel: These Nuts Assortment Kit are quality 304 stainless steel which is high hardness and high strength, which provides excellent rust resistance, will not be damaged under high pressure, and can be used for a long time. Through heat treatment and strict quality control, the surface of our nuts is smooth and bright..
  • ✅Transparent Storage Box: Acorn Hex Cap Nuts, Nylon Lock Nut, Flange Hex Lock Nuts assortment kit come with a convenient storage case, which is transparent and many compartments included, easy for your store and carry. And every size, neatly lies in a compartment individually..
Check Stock

CyclingDeal Bike Bicycle Fork Star Nut Setting Installer Install Tool with 2 Size 1' and 2 Size 1-1/8” Star Nuts - Tool Compatible with Size 1' and Size 1-1/8'

  • GREAT TOOL: The Threadless Nut Setter is used to install the star nuts found on 1” and 1-1/8” threadless headset systems..
  • HOW TO USE: Thread the nut onto the TNS insert into the fork steerer and tap it in with a hammer.
  • PERFECT SETTING: The star nut need to be tapped into the fork steerer at the right position. Too low, the headset bolt cannot reach. Too high, the star nut cannot bite the steerer wall tightly. Sets the star nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers..
  • COMPATIBILITY: Compatible with all 1-inch and 1-1/8-inch steerer tubes for road mtb or BMX. Compatible with hollow bolt BMX star nuts.
  • PACKAGE: Tool and 2 x size 1" star nuts and 2 x size 1-1/8” star nuts are included. We're so confident about our product quality that we can provide life time warranty! Made in Taiwan..
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ... on both sides for optimum structural support.
  • This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
  • Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
  • Will not fit with accessory Saddlebag Guard R....
Check Stock

MBQQ 2 Pcs Furniture Legs Rustic Decory L Shape Table Legs,Heavy Duty Metal Desk Legs,Dining Table Legs,Industrial Modern, DIY Iron Bench Legs(H28”xW17.7”)

  • PACKAGE INCLUDE - 2 inch wooden sofa leg x4, 5/16'' hanger bolt x4, insert nut x4, screw x12, rubber pad x4..
  • HIGH QUALITY - The replacement bed feet are made of eco-friendly rubber wood, and well finished with walnut color..
  • EASY TO INSTALL - Just fasten the insert nut into the bottom of furniture with screws, and screw in the bed feet with 5/16’’ hanger bolt..
  • UPGRADED DECORATION - The mid-century stylish furniture legs add beauty to your furniture and home décor. You will get lots of compliments from your guests..
  • PERFECT FIT - The wooden furniture legs fit all kinds of furniture such as bed, sofa, cabinet, dresser and etc..
Check Stock