Top Insert Fittings Reviews

VonHaus Black Wall Mount Speaker Brackets x 2 | 7.7lb Weight Capacity | Swivel & Tilt

TWO PACK: 2 speaker mounts suitable for home cinema/ satellite style speakers with single threaded insert fittings.
SWIVEL & TILT: +/- 70°swivel and +/- 20° tilt mechanism allows adjustment for optimum listening angle and sound direction.
UNIVERSAL: fits all single point speakers (with single rear entry fittings).
7lb WEIGHT CAPACITY: accommodates most small satellite speaker types.
EASY TO INSTALL: comes complete with easy install kit including screws.

Check Stock

1/8\ Compression Union Brass Tube Fitting, 1/8\ OD x 1/8\ OD, 5pcs

Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Shurflo 2088 Elbow Fitting - Elbow 1/2\ NPT-F Swivel Nut X 1/2\ Hose Barb, Nylon, (Pack of 2), P/N 244-3926-2

【0% Metaloxide】: PEX A expansion elbow made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
【160 PSI, 200°F】: Expansion elbow fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
【Package】: 1/2" Expansion 90 Elbow Fittings 10PCS 1/2.

Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

Adapter for connecting pipes or fittings of different types.
Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

...mperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool t....

Check Stock

JACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)

SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.

Check Stock

Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head

Reams 2-Inch Sch. 40 PVC, CPVC and ABS Fittings.
Can be used with standard drills, cordless drills, or impact drills.
Works great for vent lines, drain lines, water lines.
Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.
PPR Fitting Reamers are NOT recommended for use on pressurized systems.

Check Stock

Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems

Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....

Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
High Quality Material: The connector made of high quality plastic and stainless steel.
corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..

Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Elkay Everyday LK3001CR Deck Mount Kitchen Faucet with Remote Lever Handle and Side Spray, Chrome

LEAD-FREE COMPLIANT: Certified to NSF/ANSI 61 and 372 to meet all federal and state regulations for low or no-lead products..
LOW FLOW: Includes water-saving features..
INCLUDES TWO AERATORS: Comes installed with 1.5 GPM water-saving aerator.
optional 2.2 GPM aerator insert included..
REMOVABLE CARTRIDGE: Allows for easy repair and replacement of cartridge..
QUICK CONNECT SIDE SPRAY FITTINGS: Easier installation fittings that snap together in seconds.
FULLY ROTATING SPOUT: Spout rotates a full 360 degrees.
perfect for use in kitchen islands and bar/prep sinks..

Check Stock

Tailonz Pneumaitc 1/4 inch NPT 12V/24V/110V/220V Way Normally Closed Electric Solenoid Air Valve 2V025-08

【Model】2V025-08 Solenoid Valves（2 Way Normally Closed ）.
【Size】DC24V/1/4''NPT（Please air in the direction of the arrow above the product）.
【Temperature Range/Pressure Range】 0-140°F.
【Feature】2v025-08 has high precision pilot head, up to 5 times/second response speed, suitable for a wide range of, responsive, smooth work, high-speed use without jam..
【About Fittings】In each product, we provide 1/4 Push to connect fittings, you don't need to buy again, just insert 1/4 "or 6mm tubes..

Check Stock

E-Track Motorcycle Wheel Chock | Upright Hold Bike Tire Wedge for Garages and Trailers - E-Track and Bolt-Down

...W HOW MUCH your bike means to you. And we want to make it easier to enjoy it! A motorcycle wheel chock HELPS KEEP YOUR BIKE SNUG in your trailer with UPRIGHT HOLD. It’s also THE IDEAL ACCESSORY for your garage, allowing motorcycles to STAND SAFELY on their own while you tinker with them..
003e EASY INSTALL E-TRACK FITTINGS! OTHER wheel chocks require bolts, nuts, measuring tape, and sweat. This Secure & Stable Upright Hold IS PORTABLE AND EXCEEDINGLY SIMPLE – just clip the spring fittings and insert them into E-track rail slots – no hardware necessary! (It’s worth mounting E-tracks just for the LIFELONG ASSURANCE you get from these wheel chocks.) YOU CAN ALSO remove the fittings and bolt down to the floor - 3/8” socket wrench and screws required, not included..
003e ADAPT YOUR TRAILER TO ACCOMMODATE YOUR BIKES EASILY without damaging interior walls or ruining your fenders! This WELL-BUILT 1-PIECE Upright Hold E-Track Wheel Chock works perfectly to STABILIZE various kinds of cycles. It’s CONVENIENT AND EASY TO USE AND move around where needed. *NOTE: You’ll still need tie-down straps to secure your motorcycle for transportation on the road.*.
003e THIS HEAVY DUTY POWDER COATED STEEL tire wedge chock rises 6"-11" above the plate with E-....

Check Stock