Top Inner Ball Valve Reviews

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

... to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..

Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size..

Check Stock

WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600

...' port makes the valve core remover tool be compatible with R410, R22, R12, R407, R404, R32 A/C air condition system, etc. (Not suitable for Automotive AC).
Easy to Install: Use this hvac valve core remover tool, the valve core rod makes it be easily inserted into the inner valve core to control the valve core. you don't need to stop the machine and release the refrigerant. Note: Before removing the valve core, close the valve of the valve core wrench and disconnect the air conditioner inner connection..
Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and durable, suitable for most equipment..

Check Stock

R410A R22 Valve Core Remover & Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for R404A R407C R134A R32 HVAC System

...install tool can adapt to R22/R134/R410/R32R air-condition, external bypass port design can remover valve cores. Works great for both Minisplit systems as well as 1/4" service valves on split systems..
EASY INSTALLATION ----- The Schrader's core grabber with disconnect valve, the tool can be easily inserted into the inner valve core for removal or installation. Built-in disconnect valve for easy operation, no need to stop the machine, no need to release the refrigerant..
PERFECT DESIGN ----- The valve core remover installer tool is made of pure copper.
The metal knob is all designed with anti-slip design. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve. (No Gas Loss)..
GREAT FUNCTION ----- Shut-off Ball value handle, metal schrader cap, schrader's core grabber tool, built-in magnet at the bottom base. Please close the valve and disconnect the air conditioner before removing the valve core..
2-YEAR WARRANTY ----- Order from SURIEEN, we offer 2-YEAR WARRANTY, true worry-free shopping experience. If you are not satisfied with the item please contact us ask for a replacement or refund in limited time. But pls ensure that the package is the same as you received..

Check Stock

ZUKKA Mini Bike Pump Portable,Hand Bicycle Floor Air Pump for Presta and Schrader

PRESTAL AND SCHRADER COMPATIBLE:This mini portable bike pump work perfectly with both Presta and Schrader. When the product is received, the default is to inflate the Schrader valve inner tube.if inflating the Presta valve, please change the pump valve connectors from schrader to presta ..
INCLUDED: With ball needle and balloon needle,which can easily inflate some children's toys, bicycles and ball.Also include instructions manual,so that you riding without worries..
COMPACT AND LIGHTWEIGHT:Made from superior quality aluminum alloy with durable and only 9 ounces, easy to carry. It can be attached to the bike frame under the water bottle cage with the included mounting bracket..
EASY TO PUMP: Foldable handle and foot pedal design,adds friction prevent lose balance,make it easy to pump..
EASY TO USE: Dual action pumping and thumb lock, up to 130 psi capacity that allows you to use this floor pump to inflate the bike tire from flat during emergencies repair or keep the tire pressure up during the long rides..

Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
equipped with a 3/4 inch slip connection on each end.
DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
SAFETY: This ball valve complies with lead-free guidelines for potable water applications.

Check Stock

ZUKKA Mini Bike Pump Portable,Hand Bicycle Floor Air Pump,Mountain BMX & Road Bike Tire Pump,Aluminum Alloy Fits Presta and Schrader

PRESTAL AND SCHRADER COMPATIBLE:This mini portable bike pump work perfectly with both Presta and Schrader. When the product is received, the default is to inflate the Schrader valve inner tube.if inflating the Presta valve, please change the pump valve connectors from schrader to presta ..
INCLUDED: With ball needle and balloon needle,which can easily inflate some children's toys, bicycles and ball.Also include instructions manual,so that you riding without worries..
COMPACT AND LIGHTWEIGHT:Made from superior quality aluminum alloy with durable and only 9 ounces, easy to carry. It can be attached to the bike frame under the water bottle cage with the included mounting bracket..
EASY TO PUMP: Foldable handle and foot pedal design,adds friction prevent lose balance,make it easy to pump..
EASY TO USE: Dual action pumping and thumb lock, up to 130 psi capacity that allows you to use this floor pump to inflate the bike tire from flat during emergencies repair or keep the tire pressure up during the long rides..

Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..

Check Stock

Molten BD3500 - The Ultimate Outdoor Basketball for Professional Gameplay with Improved Grip, High Durability, and Enhanced Visibility. (#7)

Ultimate Durability: Molten BD3500 basketball is designed for outdoor use with a high-wear resistant, anti-slip PU surface and cross-ribbed grooves to improve grip and control..
Reflective leather material: This basketball is made of reflective cotton material, which enhances its shine and makes it a perfect choice for street basketball stunts..
Professional-grade inner bladder: The basketball is equipped with a professional-grade butyl bladder that provides excellent air retention and durability..
Advanced surface printing technology: Molten's special surface printing technology creates raised surface patterns and lettering to enhance grip and reduce errors when handling the ball..
High-quality valve: The basketball features a high-quality valve with strong sealing and reliable quality, which extends the lifespan of the ball..

Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....

Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....

Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
⑤【Package Includes】: 1 x high pressure washer ball valve.
2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).

Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....

Check Stock