Top Injection molded Seating System Reviews

Wise 3316 Boaters Value Folding Deck Chair

  • Comfortable folding chair is ideal for boat decks, docks and patios - folds easily to stow away when not in use.
  • Durable anodized aluminum frame with composite leg tips to protect deck.
  • Injection molded high impact plastic seat base frame and high compression foam padding.
  • Heavy-duty 28 oz marine grade vinyl, withstands the effects of sun, heat, rain and soiling under normal conditions.
  • Seat dimensions - height: 31", width: 25", depth: 23", seating depth: 16".
Check Stock

KOUGER De-ntal Flexible Denture Machine 110V 400W Lab Equipment Electric hydraulic press Dentistry Injection System

  • ♛ BASIC INTRODUCTION - Den-tal Denture Denture Machine is a 400W/110V den-tal denture laboratory equipment used to make flexible removable partial dentures..
  • ♛ HIGH PERFORMANCE AND HIGH EFFICIENCY - The denture injection system is easy to operate, has a long service life, low maintenance cost, and high success rate. The Den-tal laboratory equipment of the denture injection system is essential for dentists..
  • ♛ SIMPLE OPERATION - simple operation, time-saving and high casting success rate. Ordinary gear boxes can also be injection molded..
  • ♛ PRODUCT COMPOSITION - Den-tal denture injection device consists of heater and hot press. Heater: temperature control, timer and electrical system. Hot press: frame, roller, heater, bracket and flask..
  • ♛ PACKAGE SIZE - 40*34*57cm (15.7x13.3x22.4 inches), gross weight: 30kg (66.1 pounds)..
Check Stock

Pro-Tec - Full Cut Water Helmet, Gloss Black, S

  • High Density Injection Molded ABS Shell with retro style.
  • Multi-use Rear Mount Strap (Goggles, Head Light, Camera etc.).
  • 11 Open Vents for Ventilation and Drainage.
  • 45 years of Pro-Tec heritage producing the most stylish protective gear on the market.
  • Adjustable Rear Stay Tight Interior Fit System.
Check Stock

SAS Recurve Takedown Bow Case with Detachable Shoulder Sling and Pockets (Black)

  • New injection molded case accommodates parallel limb bows.
  • 3i Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and dustproof, submersible design (IP67) that is resistant to corrosion and impact damage.
  • Molded-in hinge with stainless steel hinge pins, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handles, secure stacking, and automatic ambient pressure equalization valve.
  • Four (4) SKB patented trigger latches with reinforced padlock locations, cushioned snap down handles on three (3) sides, and recessed in-line skate style wheels.
  • External Dimensions: 45" x 17.5" x 6" Internal Dimensions: 40" L x 14.50" W x 5" D.
Check Stock

Giro Semi Adult Snow Goggles - Black Core Strap with Amber Scarlet/Yellow Lenses (2021)

  • INCLUDES - Giro Semi Ski Goggles with Black Core Frame, Amber Scarlet Lens (40% VLT - Mixed Clouds), and Yellow Lens (84% VLT - Night/Race).
  • EXV FRAME - Classic/retro style goggle featuring an injection-molded cylindrical lens. Anti-Fog Coating will keep your vision crisp and clear in all conditions..
  • INJECTION MOLDED CYLINDRICAL - Injection molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. Every lens is protected by a durable, scratch-resistant coating..
  • SEAMLESS COMPATIBILITY WITH GIRO HELMETS - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggles for an exceptional fit and dependable, worry-free function..
  • TRIPLE FACE FOAM - Three part system that provides a plush contact layer against your face, a super soft middle layer that allows maximum contour, and a durable back layer connected to the goggle frame..
Check Stock

Giro Dylan Womens Snow Goggle - Black/White Data Mosh Strap with Rose Spectrum/Yellow Lenses

  • EXV FRAME FOR WOMEN - Classic/retro style goggle featuring injection-molded cylindrical lens with Optics by ZEISS. Anti-Fog Coating to keep your vision crisp and clear in all conditions..
  • INJECTION MOLDED CYLINDRICAL - Injection molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. Every lens is protected by a durable, scratch-resistant coating..
  • SEAMLESS COMPATIBILITY WITH GIRO HELMETS - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggles for an exceptional fit and dependable, worry-free function..
  • TRIPLE FACE FOAM - Three part system that provides a plush contact layer against your face, a super soft middle layer that allows maximum contour, and a durable back layer connected to the goggle frame..
  • INCLUDES 2 LENSES - one sun/all-conditions lens & one low-light lens.
Check Stock

THE NORTH FACE Cryptic, TNF Black Metallic Melange, OS

  • CAMPUS READY. This classic TNF bag is updated with modern features and finishes. With an upgraded suspension system, injection-molded shoulder straps and a coveted endorsement from the American Chiropractic Association, it’ll become your go-to..
  • FLEXVENT TECHNOLOGY. Our FlexVent suspension system features a flexible yoke built from custom injection-molded shoulder straps, a padded mesh back panel and a breathable lumbar panel for comfortable, ventilated support..
  • ORGANIZED STORAGE. An 11″ x 19″ laptop sleeve in the main compartment helps protect your laptop from bumps and falls. An organized front compartment and brand-new front elastic bungee system allow for easy access to everyday essentials..
  • SPACIOUS DESIGN. A large main compartment is perfect for holding books and notes. Two external mesh water bottle pockets fit standard-size water bottles..
  • TECH SPECS. Bag Dimensions: 13″ x 19.25″ x 6.75″ (33 cm x 48.8 cm x 17.1 cm). Laptop Sleeve Dimensions: 11″ x 19″ (27.9 cm x 48.2 cm). Volume: 26 L. Fabric: 600D 50% recycled polyester..
Check Stock

Wise 8WD1278-015 Pro Verzion Tour Casting Seat Grey/Blue

  • High Impact Plastic Injection Molded Seat Frame Mounts to Standard 5-1/4" Bolt Pattern Seat Post or Swivel.
  • Marine Grade 28 oz. Vinyl, withstands the effects of sun, heat, rain and soiling under normal conditions.
  • High Compression Foam Padding with Special Foam Contours for Comfort.
  • Fishing Tool Gear Holder Built in to Seat Frame Base.
  • Seat Dimensions - Height: 5", Width: 16.5", Depth: 15", Seating Depth: 10".
Check Stock

Kapro 130-62-48 Project I-Beam Level, 48-Inch

  • I-beam spirit level for determining horizontal and vertical plane as well as incline.
  • Injection-molded acrylic vials—one level, one plumb, and one 45° incline—resist breakage and have a sensitivity of 0.001"/inch.
  • V-shaped groove in the base provides reliable seating when leveling round items.
  • Sculpted handgrip for portability and ease of use.
  • Aluminum body for light weight and corrosion resistance with ABS end caps that help absorb impacts.
Check Stock

ipoob Adult Kayaking Canoe Whitewater Watersports Helmet with Camera Clamp Mount Plate (Matte Black, Medium)

  • High Density Injection Molded ABS Shell with retro style.
  • Multi-use Rear Mount Strap (Goggles, Head Light, Camera etc.).
  • 11 Open Vents for Ventilation and Drainage.
  • 45 years of Pro-Tec heritage producing the most stylish protective gear on the market.
  • Adjustable Rear Stay Tight Interior Fit System.
Check Stock

Ski Patrol

  • All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex - Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
  • Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
  • Sandwich Construct - White ABS Side Wall - Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
  • STAUBER Dyna Snowboard Bindings - Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
  • Includes 8 - 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.
Check Stock

Aloha Surf Hotel

  • All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex – Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
  • Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
  • Sandwich Construct – White ABS Side Wall – Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
  • STAUBER Dyna Snowboard Bindings – Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
  • Includes 8 – 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.
Check Stock

THE NORTH FACE Cryptic, TNF Black Brass Melange, OS

  • CAMPUS READY. This classic TNF pack is updated with modern features and finishes. With an upgraded suspension, injection molded shoulder straps and a coveted endorsement from the American Chiropractic Association, it'll become a go-to for all undergrads..
  • FLEXVENT TECHNOLOGY. The FlexVent suspension system features a flexible yoke built from custom injection-molded shoulder straps, a padded mesh back panel and a breathable lumbar panel for comfortable, ventilated support..
  • ORGANIZED STORAGE. A 14.25" x 12" laptop sleeve in the main compartment helps protect your laptop from bumps and falls. An organized front compartment and brand-new front elastic bungee system allow for easy access to everyday essentials..
  • SPACIOUS DESIGN. A large main compartment is perfect for holding books and binders. Two external mesh water bottle pockets fit standard-size water bottles..
  • TECH SPECS. Bag Dimensions: 13" x 19" x 6" (33 cm x 48.26 cm x 15.24 cm). Laptop Sleeve Dimensions: 11" x 17" (17.94cm x 43.18cm). Volume: 29 L. Fabric: 600D, 50% recycled polyester..
Check Stock