Top Infrared Emitter Reviews

18 7/16' Stamped Infrared Emitter and Grill Grate Replacement for Charbroil Commercial Tru-Infrared Prior to 2015 463243911 463246909 463241013 463241313 463241314 463241014 463247109 466242014, etc.

  • Great charbroil parts replacement for your grill! Fits Charbroil TRU Infrared 4 Burner Grills 466247110 466241013 463273614 466242014 466270610 466243911 463271009.
  • Great for Charbroil Commerical Infrared 4 Burner Grills 463268008 463247009 463257010 463257110 466246910.
  • Fits Charbroil Performance Infrared 4 Burner Grills 463225312 463270512 463225313 (Performance T-46D) 463225315 463224611 466270611 463261709..
  • PETKAO’S stamped stainless steel emitters and cast iron cooking grill grates replacement kit fit Charbroil Performance Infrared 3 Burner Grills 463270912 463271913 466241313 463270914 (Performance T-36D) 463270909 463270913 463271912.
  • Charbroil Commerical Infrared 3 Burner Grills 463257110 463247109 463247412 463257111 466257110 463241314 466247109 463241313 465257110..
  • PETKAO’S emitters and grill grates kit fit Charbroil Precision Flame Infrared 2 Burner Grills 463262210 463262211.
  • Fits Charbroil Performance Infrared 2 Burner Grills 463270612 463270613 463270614 463270615 463273615.
  • Fits Charbroil TRU-Infrared 2 Burner Grills 463270610 463270611 466242014 461210010 463210011.
  • Charbroil Commerical Infrared 2 Burner Grills 463246909 463246910 466246910 463243911 463243812 463241013..
  • Fits Kenmore 3 Burner Grills 16657 415.16657900 415.16....
Check Stock

Char-Broil 3297527R04 Professional/Signature/Commercial Series TRU-Infrared Replacement Grate & Emitter, Pack of 1, Gray

  • Contains one section of premium stainless-steel emitter plates and porcelain-coated cast-iron grates- for use with Char-Broil Professional, Signature and Commercial Series TRU-Infrared gas grills made after 2015 .Assembled Dimensions : 17.05x0x6.
  • Not compatible with Char-Broil Performance Series TRU-Infrared grills.
  • Char-Broil TRU-Infrared emitter and grates will have you enjoying no flare-ups, juicier foods and even-heat for years to come..
  • Compatible with 2015 and newer Char-Broil Commercial, Signature, or Professional Series TRU-Infrared gas grills.
  • Grill model year identified by the last 2 digits of the model number located on the back of your grill or inside the product guide.
Check Stock

Char-Broil 9127385 Commercial Series TRU-Infrared Replacement Grate and Emitter for 4-Burner Grills prior to 2015

  • Contains one section of premium stainless-steel emitter plates and porcelain-coated cast-iron grates- for use with Char-Broil Commercial Series TRU-Infrared 4-Burner gas grills made prior to 2015..
  • Not compatible with Char-Broil Performance Series, Professional Series or Signature Series TRU-Infrared grills..
  • Char-Broil TRU-Infrared emitter and grates will have you enjoying no flare-ups, juicier foods and even-heat for years to come..
  • Compatible with Char-Broil Commercial Series TRU-Infrared 4-Burner gas grills made prior to 2015..
  • Grill model year is identified by the last 2 digits of the model number located on the back of your grill or inside the product guide, (Example XXXXXXX12 is a 2012 model year)..
Check Stock

Char-Broil 2358971 Commercial Series TRU-Infrared Replacement Grate and Emitter for 2 and 3 Burner Grills prior to 2015

  • Contains one section of premium stainless-steel emitter plates and porcelain-coated cast-iron grates- for use with Char-Broil Commercial Series TRU-Infrared 2-Burner and 3-Burner gas grills made prior to 2015.
  • Not compatible with Char-Broil Performance Series, Professional Series or Signature Series TRU-Infrared grills..
  • Char-Broil TRU-Infrared emitter and grates will have you enjoying no flare-ups, juicier foods and even-heat for years to come..
  • Compatible with Char-Broil Commercial Series TRU-Infrared 2-Burner and 3-Burner gas grills made prior to 2015..
  • Grill model year is identified by the last 2 digits of the model number located on the back of your grill or inside the product guide, (Example XXXXXXX12 is a 2012 model year)..
Check Stock

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

  • IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
  • Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Comes with adhesive backing sticks directly onto different devices.
  • Overall length of Infrared Emitter Extender: 10 feet (3 meter).
  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.
Check Stock

uxcell IR Infrared Emitter Extension Cable 9.8ft Long 45 Degree Emission Angle 3.5mm Jack Dual Black Head 5pcs

  • Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Low current drive, low power consumption, long launch distance, small size installed..
  • Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..
Check Stock

uxcell IR Infrared Emitter Extension Cable 4.9ft Long 45 Degree Emission Angle 3.5mm Jack Single Red Head 2pcs

  • Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Low current drive, low power consumption, long launch distance, small size installed..
  • Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..
Check Stock

5mm 940nm LEDs Infrared Emitter and IR Receiver Diode for Arduino (Pack of 24pcs) EK8443

  • BOJACK 5mm 940nm LED Infrared Emitter and IR Receiver Diode Kit..
  • 10pcs 940nm Sender with Emitting Angle 45 Degrees, 10pcs VS1838B Receiver with Receive Angle 70 Degrees.
  • Emitter Voltage: 1.2-1.5V,Receiver VS1838B Voltage:3V-5V, Through Hole DIP 2pins 5mmled LEDs Set Transmitter Lights.
  • Strong structure, Corrosion resistance, High reliability, Low power consumption, Long service life..
  • Used For:Electronic devices, Phototransistor, Communication equipment, IR beam sensors, Infrared Remote, DIY PCB Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard.
Check Stock

EasiBBQ Emitter Plates for Charbroil Grill 463242515, 463367016, 463242516, 466242515, 466242615, 463243016, 463367516, 466242516, 466242616, 463346017, Stainless Steel

  • Replacement for Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018..
  • Package includes 3 pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 8-1/16" per emitter. Make sure you measure the size of your original part and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
  • Improved the grilling by reduces flare-ups. It brings more flavorful food at a time..
Check Stock

uxcell 20pcs 5mm 940nm Infrared Emitter Diode DC 1.2V LED IR Emitter Light Emitting Diodes Clear Round Head 7 Meters Emission Distance

  • Polarity: Anode (Longer Part) | Cathode (Shorter Part).
  • Package Content: 20pcs x Infrared Emitter Diode.
  • Low heat, energy saving, low power consumption, long service life..
  • NOTE: IR Emitter ONLY, IR Reciever is NOT included. The product is an infrared emitting diode, which needs to be assembled on the device and cannot be directly connected to the power supply.
Check Stock

TiVo 2 Head IR Emitter / Blaster

  • Polarity: Anode (Longer Part) | Cathode (Shorter Part).
  • Package Content: 50pcs x Infrared Emitter Diode.
  • Low heat, energy saving, low power consumption, long service life..
  • NOTE: IR Emitter ONLY, IR Reciever is NOT included..
Check Stock

TNP IR Emitter - Dual Head Infrared Remote Cable Extender (10 Feet 3 Meters) - 3.5mm Infrared Jack IR Extender for Xbox IR Repeater Kit System, IR Range 38kHz to 56kHz

  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
  • The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
  • For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
Check Stock

IR Infrared Emitter Extender Cable Extension Single HeadEye 3.5mm Jack Infrared Red Transmitter Blaster Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (IR-1.5m)

  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
  • The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
  • For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
Check Stock