Top Inflated Boat Reviews

Polyform US G-1 Saturn Yellow Boat Fender

  • A general purpose, value boat fender made by Polyform and manufactured in the USA.
  • G-2 fenders are recommended for boats between 10 and 20 ft. in length.
  • Designed for recreational, trailered boats in protected moorings.
  • G-2 boat fenders measure 4.5 in. diameter and 15.5 in. tall, with an eye diameter of 0.5 in..
  • This small craft fender ships as a single unit, pre-inflated without an inflation valve.
Check Stock

Polyform Fender Cover Black f/A-4 Ball Style

  • A general purpose, value boat fender made by Polyform and manufactured in the USA.
  • G-6 fenders are recommended for boats between 30 and 40 ft. in length.
  • Designed for recreational, trailered boats in protected moorings.
  • G-6 boat fenders measure 11 in. diameter and 30 in. tall, with an eye diameter of 0.875 in..
  • This fender ships as a single unit, pre-inflated, with a Polyform inflation valve to adjust pressure.
Check Stock

Newport Vessels 10ft 6in Inflatable Dinghy Boat Transom Sport Tender - 5 Person - 15HP USCG Rated, White/Gray

  • USCG rated triple layered 0.9mm/1,100 denier specialty coated PVC, marine wood flooring Inflatable sport boat tender..
  • Includes: Aluminum Framed Marine Wood Flooring, 1 aluminum bench seat, 2 aluminum oars, carrying & storage bag, foot pump, drain plug, towing D-rings, topside D-rings for Bimini and accessories, carrying handles, oar locks and oar holders.
  • Materials: Boat: Triple Layered 0.9mm / 1,100 denier Polyester reinforced and anti corrosive coated PVC. Material ensures protection against corrosion, sun, salt, and all destructive elements..
  • Recommended tube pressure: 3.6 PSI. Materials: Floor: 24mm thick aluminum framed custom hard marine coated plywood floor..
  • Dimensions and Specificatons: Model: The Newport, Inflated Length: 10 ft 6 in, Tube Diameter 18 in, Inflatted Width: 5 ft, Chambers: 4, Weight: 123 lbs, Max Power: 15hp, Max Load: 1,248 lbs, Max Persons: 5, High pressue inflatable Keel & V hull..
  • (Newport) DIMENSIONS & CAPACITY: Model: Newport. Length: 10 ft 6 in. Tube diameter: 18 in, Inflated width: 63 in. Chambers: 3 + 1 keel. Max Power: 15HP. Max Engine Weight: 105 lbs. Outboard Shaft: Short 15”-17”. Max Load: 1248 lbs, Max Persons: 5..
Check Stock

Mophorn Boat Fenders 10 x 28 inches, Vinyl Boat Fender Pack of 4, Ribbed Twin Eyes Boat Bumpers Black and Pump to Inflate

  • ... Handy to Inflate: The boat bumpers package includes four boat fenders, inflating needle, four ropes, and one hand pump. The fenders can be installed and taken off in a snap. And there are also four dock ropes for easy suspension..
  • Worthwhile Investment: Boat fenders, when inflated, should have a 1-inch diameter for every 4 to 5 feet of boat length. You can choose the right fender size according to your needs. It's ideal for boats, docks, yachts, sailboats, rowboats, etc..
Check Stock

Affordura Boat Fender 4 Pack Boat Bumpers Fenders with 4 Ropes, Boat Bumpers for Pontoon Boat Fenders Inflatable, 5.5 inch

  • Warranty and package- FBA Prime shipping. Two years warranty offered by Affordura boat fender. The package contains 4x 5.5 inch boat bumpers for docking, 4x the same color boat fender ropes, 1x air pump and needle, 1x storage bag..
  • Well protection- Keeps your boat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear..
  • Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 35 seconds to inflate..
  • Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side..
  • Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..
Check Stock

Affordura Boat Fender 4 Pack Boat Bumpers Fenders with 4 Ropes, Boat Bumpers for Pontoon Boat Fenders Inflatable (Black, 6.5 inch)

  • ...oat from getting scratched and damaged when tied up at the dock and around other boats. Reinforced molded eyelets support the boat bumpers fenders to hang vertically or horizontally, strong enough to withstands everyday usage but feel soft to show no signs of wear..
  • Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 50 seconds to inflate..
  • Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side..
  • Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments..
Check Stock

Marine and Rv Direct 4 Boat Fenders 6.5” X 23” Vinyl Ribbed Bumper Dock Shield Protection Includes 7 Foot Long 3/8s Braided Fender Lines & Pump to Inflate

  • ...ched and damaged when tied up at the dock or when tied up to other boats. Reinforced eyelets. The Ribbed boat bumpers fenders can be hang vertically or horizontally. Made for everyday use. These Ribbed Fenders are made of soft vinyl and won’t scratch your boat.
  • Simple to inflated with the pump included.
  • Please see sizing picture in the ad. To select the correct size for your boat if you are going to be docking in open lake prone to high winds or in an area where your boat is prone to other boats wake (non no wake zone), one size larger is recommended. Place #1 for every 10 foot of boat length with a minimum of 3 fenders along one side.
  • Our Ribbed Fenders are Rust protected and come in sizes from: 6.5” x 23.
  • 8.5 x 27” (Double Eye) 8” x 20” and 10” x 28” (HTM, Hole through the middle). See sizing chat in Pictures for the right fender for your boat, if you ever have questions please contact us.
Check Stock

6 Person Recreational Inflatable Banana Boat with Storage Bag, Foot Pump, and Repair Kit, with Reinforced Seats and Foot Areas

  • 6 PERSON BANANA BOAT: Six people may relax and have fun in this inflatable banana boat since it has two separate seats. Enjoy unlimited hours of summer fun at the pool or beach, which is suitable for both children and adults.
  • EASY INFLATION AND DEFLATION: With welded seams and commercial boat, quick release air valves for inflation and deflation, it is simple to inflate and deflate, making it convenient to fold up and take with you.
  • INCLUDES ACCESSORIES AND REPAIR KIT: This 6-person banana boat includes (6) PVC tubing handles, (3) quick release valves, (1) foot pump, (1) valve adapter, (1) repair kit, and (1) storage bag. Optimal pack to start banana boating.
  • IDEAL FOR WATER ENTERTAINMENT: This banana pool float is not only the ideal pool party item, but it also makes an excellent birthday, graduation, and summer gift for both children and adults who likes to go for a banana boat riding.
  • ENSURES LONGEVITY WITH REINFORCED PVC: This inflated banana boat is made from 0.9mm mesh reinforced PVC construction and has reinforced seats and foot areas. It also comes with a free repair kit. This banana boat has a Maximum Weight Capacity of 1020 lbs..
Check Stock

Intex Seahawk 3, 3-Person Inflatable Boat Set with Aluminum Oars and High Output Air -Pump (Latest Model)

  • Whether you're fishing, relaxing, or rowing on the Lake, the Seahawk 3 inflatable boat is great for making your boating experience exciting and entertaining.
  • Designed with heavy duty, puncture resistant PVC for comfort and durability, and an inflatable I-beam floor for rigidity, the boat contains 3 air chambers. Persons 3.
  • Seahawk 3 boat set provides added accessories including: two 48 inch aluminum oars and an Intex high-output pump for easy inflation and deflation with the 2 quick-fill, fast-deflate Boston valves.
  • Inflated dimension: 9'8" x 4'6" x 1'5". maximum weight capacity: 790 lbs..
Check Stock

Marine Mate Boat Bumpers for Docking, Inflatable Boat Bumpers, fenders, Buoy for Docking 20ft -30ft Boats Safely. 6.5inch - 4 Boat Bumpers, 4 Ropes, 1 Pump and 2 Needles

  • ...nders by Marine Mate. You will receive 4x 6.5 inch boat bumpers for docking, 4 x looped heavy duty boat bumper ropes, 2 x needles and 1 air pump for easy set up and boat storage.
  • Easy 35 second inflation per bumper and deflate if needed. Personally we keep our boat fenders inflated with air 100% of the time for easy access for docking, getting gas or stoping at restraunts on the water. If you need to deflate for any reason it’s very easy to use needle to take all air out for easy storage..
Check Stock

Bestway Hydro-Force White Cap Inflatable SUP Stand Up Paddle Board (2 Pack)

  • INFLATABLE KAYAK SET: perfect for lakes, beaches or rivers.
  • EASY TO INFLATE: and deflate with interlocking quick release valves, integrated drain valve and one removable middle fin for directional stability.
  • COMFORTABLE DESIGN: Inflated Size 2.75m x 81 cm / 9ft x 32" with inflated floor and inflatable cushions for comfortable sitting.
  • DURABLE MATERIAL: high quality durable PVC, with wraparound grab rope with built in grommets.
  • COMPLETE SET: with 1 boat, 1 paddle, 1 hand pump, 1 removeable fin and a repair patch for longer lasting use.
Check Stock

Marine Mate 5.5 inch Black Boat Bumpers for Docking, Inflatable Boat Bumpers, fenders, Buoy for Docking 16ft -22ft Boats Safely. 4 Boat Bumpers, 4 Ropes, 1 Pump and 2 Needles

  • ...nders by Marine Mate. You will receive 4x 5.5 inch boat bumpers for docking, 4 x looped heavy duty boat bumper ropes, 2 x needles and 1 air pump for easy set up and boat storage.
  • Easy 35 second inflation per bumper and deflate if needed. Personally we keep our boat fenders inflated with air 100% of the time for easy access for docking, getting gas or stoping at restraunts on the water. If you need to deflate for any reason it’s very easy to use needle to take all air out for easy storage..
Check Stock

Saturn Halkey-Roberts (HR) Hose Air Valve Adapter Inflatable Boat SUP Kayak

  • A general purpose, value boat fender made by Polyform and manufactured in the USA.
  • G-1 fenders are recommended for boats under 10 ft. in length.
  • Designed for recreational, trailered boats in protected moorings.
  • G-1 boat fenders measure 3.5 in. diameter and 12.8 in. tall, with an eye diameter of 0.375 in..
  • This small craft fender ships as a single unit, pre-inflated without an inflation valve.
Check Stock