Top Industrial Valve Bellows Reviews

Master Plunger Bathroom Kit Toilet Plunger and Toilet Brush with Buckets Black

  • The Master Plunger 500 series is the perfect all-purpose plunger, with large bellows that provides 8 cups of water displacement for lots of unclogging....
  • Prevent overflow while plunging with Master Plunger 500’s unique air relief valve. Releases air as plunger compresses to prevent overflow in clogged....
  • MB-WHT is a must have toilet brush for bathroom, the simple look of the toilet bowl cleaner brush works for any bathroom , suitable for family....
  • Heavy duty and sturdy bristles help get a deep clean your toilet bowl and reach hard to reach areas.
  • Toilet plunger and toilet brush come with a buckets for easy and clean storage.
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

TRADESAFE Gate Valve Lockout Device, 1\ to 2-1/2\ Diameter, 2 Pack, Lock Out Tag Out OSHA Compliant Valve Locks for Professional and Industrial Use

  • 2 Premium Quality Industrial Grade Thermoplastic Gate Valve Lockouts.
  • Fits 1" to 2-1/2" Diameter Gate Valve Handles with up to 3/4" Diameter Stems.
  • OSHA COMPLIANT: Lockout Tagout for Standard Gas, Propane, and Water Valves, Plus Forklift Gas Valves.
  • INDUSTRIAL USE: Intended for Professional and Industrial purposes (not recommended for household use).
  • TRUSTED LOCKOUT SUPPLIER: Real USA Based Safety Company.
Check Stock

Yellow Jacket 78060 Complete Test Kit, 0-35' W.C

  • Sensitive diaphragm gauge calibrated in inches of water column and ounces per square inch, Improved lamination strength of diaphragm (bellows) to brass plate withstands higher over-pressure, Tube nipple for easy connection to system manifold, Two gauge ranges available, The unique single bellows on brass plate design replaces the double bellows for a stronger seal that resists greater over-pressure.
Check Stock

Robinair 42160 MANIFOLD PRESSURE TEST KIT 0-35'' W.C.

  • Sensitive diaphragm gauge calibrated in inches of water column and ounces per square inch, Improved lamination strength of diaphragm (bellows) to brass plate withstands higher over-pressure, Tube nipple for easy connection to system manifold, Two gauge ranges available, The unique single bellows on brass plate design replaces the double bellows for a stronger seal that resists greater over-pressure.
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

ERA SCH 80 PVC 6" COMPACT BALL VALVE (SOCKET)

  • Super easy to open & close - Much easier to operate than original valve with short T-handle. (Review from many buyers)..
  • One-piece ball valve design - There are no redundant joints to minimize water leakage, excellent industrial design..
  • Technical parameter - Withstand a working pressure of 150 PSI and a maximum temperature of 140 °F. Fits for 1" Schedule 40 PVC Pipe..
  • Ideal PVC ball valve for your project - Select a high-quality valve for your water project to reduce the cost of later maintenance..
  • Wide application scenarios - This valve is applicable to a variety of work sites, suce as swimming pools, sewage pipes, sprinkler irrigation system, agricultural irrigation system, and can work even in harsh environments..
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

SANKUU 2 Pack Brass Hose Shut Off Valve, 3/4 Inch, with 4 Extra Rubber Washers

  • SUPER VALUE: Package includes 2 Pcs garden hose shut off valve and extra 4 pcs rubber washers..
  • HEAVT DUTY METAL CONSTRUCTION: Hose valve is made of solid brass, stainless steel ball shut-off..
  • Hose shut off valve adopts large brass handle, which is in line with ergonomics and is more comfortable to use..
  • SAVE WATER RESOURCES: Garden hose shutoff valve can adjust the flow of water and save water..
  • WIDE APPLICATION: Standard 3/4" Brass Shut Off Valve fits all the 3/4" garden hoses thread watering equipment. Ideal for golf courses, sports fields, industry equipment, landscape and other industrial applications..
Check Stock

Treasure Gurus Antique Style Bellows Box Camera Die Cast Pencil Sharpener

  • The antique camera shows great attention to detail with its accordion-style bellows and intricate metal design.
  • Film photography fans will love this 1/4 scale miniature antique bellows camera dollhouse accessory.
  • The miniature camera measures 2 1/2" long, 1 1/2" wide, and 1 7/8" tall.
  • On the bottom of the miniature bellows camera hides a fully functional pencil sharpener, making it the ideal addition to a pencil sharpener collection.
  • All of our pencil sharpeners ship brand new in manufacturer's packaging with our 100% Customer Satisfaction Guarantee.
Check Stock

JACO FlowPro Tire Inflator with Pressure Gauge - 100 PSI

  • Mechanic Recommended: Performance tested & calibrated accurate to ±2% at our NIST and ANSI certified calibration lab, providing the ability to measure, inflate, & air down tires with precision up to 100 PSI without relying on batteries. 0-100 PSI dial glows in the dark for high visibility at night..
  • Fully equipped with a solid steel body w/ a rugged matte black powder coated finish, heavy duty 21″ flexible hybrid air hose, precision “push-to-inflate” air filler thumb trigger, and built-in air bleeder valve to quickly air down overinflated tires..
  • Lightning Chuck – includes our all-new patented automatic lock-on Lightning Air Chuck w/ advanced locking mechanism & quick-release valve – no more leaking air or fighting with the valve stem for a proper seal..
  • Complete in-line inflation set – ready to attach to your air compressor set-up with 1/4″ NPT fittings – accessories includes (1) industrial quick-connect steel plug fitting, (1) thread seal tape roll, and Quick Start Guide..
  • 100% Lifetime Guarantee by JACO (for any reason) when you order today, so click “Add to Cart” with confidence and take your garage or shop tire filling setup to the next level w/ professional, industrial-grade air tools!.
Check Stock

NIBCO - NLN10XK W910B-LF/W960B-LF Silent Wafer Check Valve Lead-Free Class 125 Iron Body Bronze Seat and Disc 6

  • The NIBCO lead-free wafer style silent check valve is spring actuated with renewable bronze seat and disc.
  • The spring return reduces noise for quiet operation.
  • Check valves prevent backflow by automatically closing when fluid reverses direction.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0. 25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock