Top Industrial Ethernet Switch Module Reviews

Dell PowerEdge M1000e H330H Blank Insert Module

  • Resilient HA stacking with up to 6 switches (only SFP+ ports can be used for stack connections).
  • Up to 24 auto-sensing 1/10Gb Ethernet switching ports available.
  • 16 internal server 10Gb (KR) Ethernet ports with auto-negotiation capability to 1Gb Ethernet.
  • 4 external integrated 1/10Gb SFP+ Ethernet ports.
  • Flexible media choices for up to 4 additional 1/10Gb uplink ports with one optional FlexIO Module: 4-port SFP+ 10GbE module 3-port CX-4 10GbE copper module (supports 10Gb connections only) 2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).
Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

  • ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
  • ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
  • ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
  • ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
  • ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check Stock

Wiitek SFP+ to RJ45 Copper Modules, 10GBase-T Transceiver Compatible for Cisco SFP-10G-T-X, Ubiquiti, Netgear, Mikrotik, Unifi (Cat 6a/7 or Better, 30-Meter)

  • WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
  • CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
  • PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
  • Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
  • HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
  • SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..
Check Stock

Tripp Lite Industrial 8 Port Ethernet Network Switch 10/100 Mbps -40° to 167°F Temperature Range Unmanaged TAA Compliant DIN Mount (NFI-U08-2)

  • Industrial-grade switch expands Ethernet to factory floors and other environments with space constraints and wide temperature ranges. Eight auto-negotiable 10/100 Mbps RJ45 ports connect over LAN..
  • Industrial-grade switch supports operating temperature range of -40° to 75°C (-40° to 167°F)..
  • Easy-to-read LEDs indicate connection and activity status for all 8 Ethernet ports.
  • Plug-and-play operation with no software or configuration required before use.
Check Stock

Tripp Lite Industrial 5 Port Ethernet Network Switch 10/100 Mbps -40° to 167°F Temperature Range Unmanaged Splitter TAA Compliant DIN Mount (NFI-U05)

  • Industrial-grade switch expands Ethernet to factory floors and other environments with space constraints and wide temperature ranges. Five auto-negotiable 10/100 Mbps RJ45 ports connect over LAN..
  • Industrial-grade switch supports operating temperature range of -40° to 75°C (-40° to 167°F)..
  • Easy-to-read LEDs indicate connection and activity status for all 5 Ethernet ports..
  • Plug-and-play operation with no software or configuration required before use..
Check Stock

Tripp Lite Industrial 8 Port Ethernet Network Switch 10/100 Mbps -40° to 167°F Temperature Range Unmanaged Splitter TAA Compliant DIN/Wallmount (NFI-U08-1)

  • Industrial-grade switch expands Ethernet to factory floors and other environments with space constraints and wide temperature ranges. Eight auto-negotiable 10/100 Mbps RJ45 ports connect over LAN..
  • Industrial-grade switch supports operating temperature range of -40° to 75°C (-40° to 167°F)..
  • Easy-to-read LEDs indicate connection and activity status for all 8 Ethernet ports.
  • Plug-and-play operation with no software or configuration required before use.
Check Stock

VONETS 2.4GHz WiFi Module/Mini Router/WiFi to Ethernet Bridge/Hotspot Signal Repeater/Extender/Amplifier/AP, USB/DC Powered with 2 RJ45 Ports for DIY Industrial Engineering Network Device VM300-H

  • 【WiFi to Ethernet or Ethernet to WiFi convert】Industrial Mini 2.4GHz WiFi Module/Mini WiFi Router/Wireless Ethernet Bridge/Repeater (small size).
  • Can achieve WiFi to Wired or Wired to WiFi function.
  • Support WiFi 802.11b/g/n, WiFi rate:300Mbps.
  • 2 Ethernet ports 10/100Mbps adaptive (USB/DC power supply cable.
  • 【Support wide voltage】DC5V-15V(Typical 5V/1A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 15.5V), USB or DC optional powered mode.
  • the suggestion is: this device cannot use the USB or DC directly plugged into the computer for power supply, it needs to be powered by an independent standard 5V/1A power supply..
  • 【Support two kinds of application methods】: Router mode.
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • WiFi Repeater (WiFi signal repeater), can extend WiFi transmission distance.
  • 【WiFi hotspot automatic reconnection】two hotspot matching methods: Full match authentication mode, SSID and password authentication mode, Support SSA signal strength detection reporting function, motion detection function and memory hotspot(Up to 100) automatic matching connection fu....
Check Stock

JBL Professional CSMA2120 Commercial Series Two-Channel 120-Watt Powered Audio Mixer/Amplifier

  • Sleek industrial look with illuminated rings, making them easy to see and operate.
  • 8 inputs with 2 outputs of 120-watts of power.
  • Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection.
  • Supports 70V and 100V distributed audio systems without needing a separate transformer.
  • Priority muting, VOX ducking, and phantom power for all models.
  • Remote volume control capability using JBL CSR-V module and standard Ethernet cable.
  • Three-Year, No-Fault, Fully Transferable completely protects your investment.
Check Stock

TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
  • POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
  • DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
  • REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
  • GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
  • SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).
Check Stock

iCreatin 4-Ports Passive Power Over Ethernet PoE Injector Adapter Midspan w/ 48V65W Power Supply for 4 IP Camera, VOIP Phones or Access Points

  • This Power over Ethernet module allows you to power up to 4 devices remotely over ethernet wiring up to 328 ft (100 meters) away.
  • Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable..
  • 10/100M operation, Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground..
  • For Many popular devices like IP Cameras, IP Phones, WiFi Access Points and more.
  • 48V 65W high quality UL listed power supply included, power for IEEE802.3af device..
Check Stock

MokerLink 5 Port Industrial Din Rail Switch, 4 Ports and 1 Uplink, 10/100Mbps Fast Ethernet, DIN-Rail & Wall Mount Included

  • This network switch include 4 port ethernet ports, 1 port uplink, support 10/100Mbps adaptive, compliant with IEEE 802.3, IEEE 802.3u, IEEE802.3x ethernet standards.
  • The shell is made of industrial-grade aluminum alloy, which is more sturdy, compact design and small size, integrated DIN-rail and wall mount kit, installation and disassembly are very simple.
  • 1 DC Power and 2 Industrial power(4 pin terminal), total of 3-way power supply is more flexible. Automatic fault switching, anti-reverse connection does not damage the equipment, higher reliability. ***Please note that the power adapter is not included***.
  • IP30 protection grade, working temperature -40~75°C(-40~185°F), super robustness, anti-lightning, anti-static and anti-overload protection, adapt to various harsh environments.
  • Support auto-negotiation, plug and play, no configuration needed, low-power consumption CPU, no fan quiet operation, green energy saving, suitable for various networks, such as home office, computer room, warehouse, factory, compact control box and other industrial scenarios with ethernet access.
Check Stock

iCreatin 8-Port Passive Power Over Ethernet PoE+ Injector Adapter with 48V 65W Power Supply for 8 POE Enabled IP Camera, VOIP Phones, Access Points and More, 10/100Mbps

  • This Power over Ethernet module allows you to power up to 8 devices remotely over ethernet (10/100Mbps) wiring up to 328 ft (100 meters) away.
  • Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable..
  • Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground..
  • For Many popular devices like IP Cameras, IP Phones, WiFi Access Points and more.
  • 48V 65W high quality UL listed power supply included, can power for IEEE802.3af device..
Check Stock

Cable Matters 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver for Cisco, Ubiquiti, TP-Link, Huawei, Netgear, and Supermicro Equipment

  • Connects a network switch, server, or NIC with SFP or SFP+ to RJ45 Gigabit Ethernet network for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications.
  • Compatible with MSA compliant equipment from Cisco, TP-Link, Huawei, Netgear, Supermicro.
  • Low power consumption and low EMI emission design SFP RJ45 module.
  • Hot-pluggable with advanced ESD protection.
  • Up to 100m transmission distance for 1000BASE-T Gigabit Ethernet over Cat5e Cable.
  • Backwards compatible with 10/100 Ethernet modes.
Check Stock