Top Inductive Voltage Regulator Reviews

PISCISD 74519-88 HARLEY Voltage Regulator Rectifier Fit ForHarley Davidson Softail Springer，Big Twin，CVO Dyna FLT,Heritage,Low Rider,Road Glide 2009-2013, Road King 1994-1996 2009-2014

COMPATIBLE MODELS: Voltage Regulator Rectifier for Harley-Davidson CVO 2014, fits for Harley-Davidson Dyna 1991-1999, fits for Harley-Davidson Dyna Glide 1992, fits for Harley-Davidson Electra Glide 1989-1996 2009-2014, fits for Harley-Davidson Fatboy 1990-1999, fits for Harley-Davidson Heritage Softail 1989-1999, fits for Harley-Davidson Heritage Springe 1997-1998, fit for Harley-Davidson Low Rider 1989-1992..
OEM NUMBER: Replaces HARLEY-DAVIDSION voltage regulator part numbers:74519-88,74519-88A,H1988,Please check OEM number before buying..
HIGHT QUALITY: Voltage regulator rectifier ueses original stabilivolt and advanced heat conduction system to control the output. Voltage stabilize at 12V to Protech Battery System, Lights,Reduce Load, and Extending Mortorcycle Service Life.ALL Regulators have been Tested Strictly to make sure every regulator have original HARLEY regulator Performance..
GOOD MATERIAL:Voltage rectifier regulator use high quality aluminum Shell , highest grade and thick aluminum substrate , high-performance electronic components..

Check Stock

Baomain Approach Sensor Proximity Switch PL-05N DC 10-30V 200mA 5mm Inductive Detector NPN NO

LJ12A3-4-Z/AY (PNP NC) inductive proximity switch.
Wire Type : DC 3 Wire Type (Black, Brown, Blue).
LJ12A3-4-Z/AY inductive proximity switch supply voltage : DC 6-36V.
M12 approach sensor theory: Inductive Sensor.
Inductive proximity switch sensitive detection: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
LJ12A3-4-Z/AY application: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is widely used in mechanical automation, 3D printer probe bed leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc..

Check Stock

uniquegoods 6V 12V 24V 28V 3A 80W DC Motor Speed Controller (PWM) Speed Adjustable Reversible Switch 1203BB DC Motor Driver Reversing

80A CURRENT---The speed controller regulator is of new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a good solution to over-current of electric stove wire caused by low resistance during cooling.
STABLE & DURABLE---This voltage regulator is adjusted with button which is much more stable than potentiometer. Voltage regulator has wave voltage absorbing circuit and effective protects large power silicon controlled rectifier, longer service life and more durable.
HEAT DISSIPATION ENHANCING---Designed with large and thick heat sink, the speed controller regulator can enhance heat dissipation more effectively.
OUTPUT VOLTAGE ADJUSTING---The speed controller regulator can easily adjust the output voltage on a scale of 0-100% (nonlinear) to power electric device.
WIDE APPLICATION---The speed controller regulator can be used as power supply for large electrical devices of less than 10000W, enough for household appliances or for small factory, could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc.

Check Stock

Twidec/4mm Inductive Proximity Sensor Switch 6-36V DC 300mA Detector NPN NO 3-Wire Proximity Switch SN04-N

Product Name : Inductive Proximity Switch.
Operating Temperature : -25°C to +55°C (Non-freezing Condition).
Size : 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia).
Package Content: 1 x Inductive Proximity Switch.

Check Stock

Twidec/M18 Approach Sensor Inductive Proximity Switch PNP NO DC 6-36V, 8mm Detecting Distance LJ18A3-8-Z/BY

Product Name：Inductive Proximity Switch.
Wire Type : DC 3 Wire Type (Black, Brown, Blue).
Total Size: 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia).
Package Content : 1 x Inductive Proximity Switch.

Check Stock

Twidec/M12 Approach Sensor Inductive Proximity Switch PNP NO DC 6-36V, 4mm Detecting Distance LJ12A3-4-Z/BY

Product Name：Inductive Proximity Switch.
Wire Type : DC 3 Wire Type (Black, Brown, Blue).
Total Size: 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia).
Package Content : 1 x Inductive Proximity Switch.

Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

... to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, ....

Check Stock

CKT3800-400 Touch Screen Dry Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range 50℃~400℃

Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..

Check Stock

Voltage Regulator Rectifier For John Deere 355D GT242 GT262 GT275 Lawn Tractors

★100% Brand new high performance Voltage Rectifier Regulatorand All parts are tested and quality controlled prior to shipment.
★Replacement Part Numbers: M70121,M97348,21066-2056, 21066-2070,SH578-12, SH626-12.
★This Voltage Rectifier Regulator is made up of high quality aluminum , highest grade lamination materials,higher grade of electronic components.This rectifier has overheat protection , help to dissipate excess voltage,prevent over-charging battery , improved heat sink and charging capabilities.
★This Voltage Rectifier Regulator is made up of high quality aluminum , highest grade lamination materials,higher grade of electronic components..
★Package including: 1 X Voltage Rectifier Regulator as images display.

Check Stock

CKT3800-150B Touch Screen Dry Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range -30℃~150℃

Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..

Check Stock

Taiss 2pcs LJ12A3-4-Z/AX Inductive Proximity Sensor Detection Switch NPN NC DC 6V-36V 4mm Normally Close Proximity Switch 6-36V Approach

Product Name : Inductive Proximity Switch.
Wire Type : 3 Wire Type (Brown, Blue, Black).
Switch Appearance Type : Cylinder Type, Metal Shell.
Supply Voltage : DC 6-36V Output Current : 300mA.
Total Size : 66 x 21mm/ 2.6'' x 0.8'' (L*Max.D).
Package Content : 2 x Inductive Proximity Switch.

Check Stock

Fluke 88 V/A KIT Automotive Multimeter Combo Kit

Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature.
Manual and auto ranging modes for user flexibility. RPM measurements with inductive pickup.
Built in thermometer allows for temperature readings without a separate instrument.
Performs millisecond pulse width measurements for fuel injectors. Millisecond pulse width measurements for fuel injectors.
Safety rated for Category III to 1000V and Category IV to 600V. Resistance, continuity and diode test.
Millisecond pulse width measurements for fuel injectors.

Check Stock

Electronics-Salon 4X TO-220 Heatsink Small Power Aluminum Heat-Sink SKU HS-001-4

For Package TO-220 Diodes, Transistors, Non-Inductive Resistors, LM78xx LM317 LM337 Regulator IC, etc..
35 x 35 x 12.5 mm (1.4 x 1.4 x 0.5 inch)..

Check Stock