Top Indexable Groove Cut off Bars Reviews

ARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

  • SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
  • QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....
Check Stock

ABN Adjustable Pry Bar Set Heavy Duty 11-Point Indexing Pry Bar Set Automotive Pry Bar 3pc Kit – 8in, 12in, 16in

  • ALIGN & REPOSITION AUTOMOTIVE EQUIPMENT: Use the ABN | Pry Tool Indexable Pry Bar Kit 3-Piece Set to remove engine and axle drive seals, pull diesel injectors, position engines, align steel components, and reposition equipment.
  • Each automotive pry bar tool has a full 180-degree indexable head swing that you can set to 1 of 11 different locking positions for the right angle and leverage to access hard-to-reach spots.
  • Simply push down button on head and turn claw to angle.
  • BUILT TO LAST: Constructed with a strong locking device on index and full chrome-vanadium steel (CR-V) body with a manganese phosphate finish for maximum strength and longevity that resists rust and corrosion.
  • Adjustable prybar tool set meets or exceeds ANSI specifications.
  • GRIP COMFORTABLY: Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity.
  • EASY STORAGE: Heavy-duty 17.5” x 2.4” x 8.2” inch (44.5cm x 6.1cm x 20.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Pry bars heavy duty flat bar tool kit includes (3) adjustable and indexable angle pry bars (8”, 12”, 16” inch) and (1) ca....
Check Stock

Accusize Industrial Tools Gtn-4 PVD Coated Self-Lock Carbide Cut-Off Inserts, 0 Deg, Cutting Stainless Steel, 10 Piece Set, 2403-6005x10

  • Self-Lock Carbide Cut-Off Inserts, 0 degree Angle, cutting Stainless steel.
  • For cut-off and grooving, single-sided notation..
  • Work with Accusize cut-off blade NCIH26-4 (item# 2402-0008) and NCIH32-4 (item# 2402-0016).
  • 1" Heavy-duty Indexable Grooving Holder (item# 2415-5036).
  • Also work with Accusize 3/4inch self-lock cut-off tool (item#2410-0013).
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

with Extra 10 Gtn-2 Tin Coated Carbide Inserts

  • 1/2'' Shank Heavy Duty Indexable Grooving/Cut-Off Holder, Nickel Plated, with a Gtn-2 Tin Coated Carbide Insert, 2415-5024.
  • Gtn-2 Tin Coated Carbide Inserts, 10 Pcs/Box, 2403-2003x10.
Check Stock

LittleMachineShop.com Tooling Package, Atlas/Craftsman 6' Lathe (3593)

  • 3/8" Indexable TCMT Inserts, P1N Cut-Off Blade.
  • 1/2" Drill Chuck, 1MT Tang to 33JT Drill Chuck Arbor.
  • 9-piece carbide Boring Bar Set - 3/8" shank.
Check Stock

Lathe Threading-Tool Bit Set 21pcs - 7pcs 5/8 Turning Holder Boring Bars / 14pcs Indexable Carbide Inserts Golden CCMT09T304 DCMT11T304 16IR A60 16ER AG60 MGMN300 for Cutting Tool

  • 【Package】: 7pcs Turning tools (boring bars) with 5/8" shank diameter + 14pcs indexable GOLDEN carbide inserts + 7pcs wrenches.
  • 【Durable and Long Life Turning Holder】: Made of 42CrMo steel which with high hardness and is very wearable, also have strong toughness and low-temperature impact resistance.
  • 【Indexable Carbide Golden Inserts】: Agile cutting, good chip removal, no cutting break.
  • 【Easy to Use】: Easy to assembly, shock proof.
  • 【After-sales Service】 : Any questions, please contact us anytime, we'll quickly response to service for you. We offer FREE EXCHANGE for dissatisfaction.
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

OSCARBIDE 3/4\Self-Lock Block SLTBN19-5 with Adjustable Blade NCIH26-3,Blade NCIH26-4,Tin Coated 5 pcs GTN-3 Carbide Inserts and 5 pcs GTN-4 Inserts Parting Grooving Cut-Off Tool Set

  • Indexable Cutting Tool Holder Set include 1 pc 3/4" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench..
  • CTN-3 carbide inserts made of carbide Grade C6,0.12" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16" width, TiN Coated.
  • Suitable for varied Grooving,Cut-off,Parting-off,Chamfering.
  • This cut-off tool kit works with tool holders that can hold 3/4" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel.
Check Stock

GEARWRENCH 33\ Extendable Indexing Pry Bar - 82220 and GEARWRENCH 29-48\ Extendable Pry Bar - 82248

  • 8" and 10" Pry Bars Provide Leverage in Tight Confines.
  • 16" Pry Bar for Leverage in Medium-Duty Automotive and Industrial Applications.
  • 14 Locking Head Positions for Unmatched Access.
  • For Engine Repositioning and Placement, Aligning Steel Components and Fabrications and Repositioning Equipment.
  • Head Indexable Through 180° for Greater Leverage.
Check Stock

Mann Lake FR812 100-Pack Unassembled Grooved Top and Bottom Endbars without Holes, 6-1/4-Inch

  • Unassembled groove top and groove bottom frames with no holes.
  • Standard outside dimensions, works with all uncapppers.
  • Includes 200 end bars, 100 top bars, and 100 bottom bars per pack.
  • With this 6-1/4-inch frames, use 6-5/8-inch supers and 5-5/8-inch foundation.
  • Measures 19-inch length by 1-3/8-inch width by 6-1/4-inch height.
Check Stock

Accusize Industrial Tools 3/4'' Shank 7 Pc Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2006plus

  • Shank Size (H x W): 3/4" x 3/4". Overall Length: 4-1/2". Insert screw and wrench included.
  • Including 2 of MGMN300, 16ER, WCMT32.5, CCMT32.5, DCMT32.5 Carbide Inserts.
  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Including: 7 pcs indexable turning tool holder.
  • The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
Check Stock

49 Feet Door Weather Stripping \q\ Foam Door Weatherstrip V-Shaped Foam Kerf Weather Stripping Door Frame Weather Stripping for Doors Windows Easy Cut to Size（Black）

  • 【ULTRA LONG WEATHER STRIPPING】: Total Length Of Door Weather Stripping Is 49 Feet, Which Can Be Applied To Doors Of Different Sizes According To Your Needs. The Sealing Gap Between Doors Is (8-13mm). Please Measure The Groove Size Before Purchasing To Ensure That It Can Be Used.
  • 【EASY TO CUT AND INSTALL】: The Weatherstrip Does Not Need Adhesive, Just Cut The Weatherstrip To The Applicable Size After Measuring The Size Of The Door, And Just Insert The White Plastic Flange Into The Groove Or Groove To Complete The Tight Sealing And Not Easy To Fall Off.
  • 【PVC FLANGE DESIGN】: The Sealing Strip Is Designed For Rigid Pvc Flange, Which Can Be Tightly Inserted In The Appropriate Groove Without Falling Off. High Density Pu Foam And More Solid Pe Covering Layer Make This Door Weather Strip Flexible And Durable, And The Long-term Closed Type Will Fit Well With The Door Seam.
  • 【APPLICABLE TO ALL WEATHER】: It Is Very Suitable For Replacing Your Worn Weatherstrip. The Perfect Closure Can Make Your Room Soundproof And Better Block Light, Rain, Dust, Wind, Snow, And Creepy Reptiles, Making Your House Warm In Winter And Cool In Summer.
  • 【100% AFTERSALES SERVICE】: We Provide You With Excellent Service And Ensure That Our Products Go Through Strict Qualit....
Check Stock