Top Inconel Sheet Reviews

PULSAR Drop-in Replacement Turbine Wheel Shaft for 94-97 7.3L TP38 Turbo OBS Truck

360 degree CNC machined brass thrust bearing for better durability.
Staggered step gap seal rings on the compressor and turbine ends for a better seal.
Fits 1994-1997 7.3L OBS truck with Garrett TP38 Turbo ONLY.

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
135° split point tip prevents drill from walking.
Round shanks allow use with a wide variety of tool holding systems.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
6" overall length for drilling where extra length for reach is required.

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
135° split point tip prevents drill from walking.
Round shanks allow use with a wide variety of tool holding systems.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
6" overall length for drilling where extra length for reach is required.

Non-slip serrated jaw of tough molybdenum steel holds material firmly and uniformly spreads cutting force across blade edge.
Jaws specially hardened to cut metals such as stainless steel, Inconel, and titanium.
Item Package Dimension: 9.0" L x 6.0" W x 0.375" H.

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
135° split point tip prevents drill from walking.
Round shanks allow use with a wide variety of tool holding systems.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
12" overall length for drilling where extra length for reach is required.

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
135° split point tip prevents drill from walking.
Round shanks allow use with a wide variety of tool holding systems.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
6" overall length for drilling where extra length for reach is required.

0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..

5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.

Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

33 Piece Set with 1/2″ Reduced Shank Drill Bits.
Effective in drilling tough, high tensile strength materials like stainless steel, Inconel, and titanium.
Reduced Shank Drills expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
135 degree split point tip for self-centering and reducing thrust.
Manufactured to Aerospace Standard 907 and display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel.
Sizes include: 1/2″, 33/64″, 17/32″, 35/64″, 9/16″, 37/64″, 19/32″, 39/64″, 5/8″, 41/64″, 21/32″, 43/64″, 11/16″, 45/64″, 23/32″, 47/64″, 3/4″, 49/64″, 25/32″, 51/64″, 13/16″, 53/64″, 27/32″, 55/64″, 7/8″, 57/64″, 29/32″, 59/64″, 15/16″, 61/64″, 31/32″, 63/64″ and 1″..