Top Inch To Metric Adapter Reviews

NEIKO 20742A 3/8” Digital Torque Adapter, 14.7-99.6 Ft-Lb, 3/8” Drive Digital Torque Wrench Converter/Torque Wrench Adapter, Alert Signals Torque Setting, Calibrate Digital & Analog Torque Wrench

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/8-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 14.7-99.6 Ft-Lb or 27-135 N-m.
Check Stock

Apache 99023677 2600 PSI Pressure Washer Gun Kit with 1/4" x 25' Hose, Metric Adapter, Variable Wand Spray Nozzle

  • Set includes gun, hose, wand, variable nozzle, and adapter for gas or electric pressure washers rated up to 2,600 psi with a metric pump outlet.
  • Gun has metric inlet and outlet, has a trigger lock for control, and connects to the included 1/4″ diameter x 25′ long hose.
  • Wand includes a variable-angle spray nozzle tip with a soap-dispensing function.
  • Male metric adapter connects two female ends together for accessory attachment.
  • Maximum temperature is 140 degrees F, and maximum flow is 7.0 gpm.
Check Stock

NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter 13 Piece SAE 6-32NC to 1/4-20NC and Metric Drill Bit Set M3 to M10 Metric Tap Set

  • 3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job..
  • 1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes..
  • VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more..
  • HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear..
  • CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes..
Check Stock

Angle Grinder Attachments Adapter 5/8\ 11 Female to M14 Male for Water Cooling Hole (1)

  • Heavy Duty Build: Our Angle Grinder Adapter is made using high-quality hardened alloy that it for hand power tools grinder, wet polisher, spindle, metric hole saw, mortar rake..
  • Size: 5/8" 11 female to M14 threaded male adapter for hand tools such as grinder, wet polisher..
  • Great for all power tools to use conveniently with 5/8" 11 threaded.
  • M14 is 0.75 inch for diamond tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw.
  • We Have Your Back: If you have any issues with the Angle Grinder Attachment M14 Adapter ,just let us know and we will help you resolve them quickly to ensure you are completely satisfied..
Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Check Stock

GEARWRENCH 35 Piece 1/4inch Drive MicroDriver Set - 85035

  • 18 piece 1/4 inch shank bits set and 5 piece 5/16 inch shank bits set.
  • Set is made from all metal construction of the finest tool steel.
  • Tools have a full polish chrome finish for long tool life.
  • Screwdriver bits have internal bit feature which forces bit surface to the opposite side for maximum fastener retention.
  • Blow molded carry case has a spot for each tool for safe storage and easy access.
Check Stock

30 Flexible Drill Bit Extension Hex Shank Rotatable Joint Socket 1/4, 3/8, 1/2 Inch Hex Adapter Socket Bendable Drill Bit Extension Screwdriver Drill Bit Holder 105 Degree Angle Drill Tool

  • Rich combination: you will receive 1 bendable drill bit extension, 3 socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 3 pieces 360 degree rotatable joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 short screwdriver bits, 1 piece 105 degree right angle drill extension, 1 socket wrench, 3 magnetic screwdriver bits and 8 hex shank impact driver socket adapters, nice combination for daily using and replacement.
  • Nice rocket adapter set: socket adapters set, 360 degree rotatable power drill adapters set and power drill sockets adapter set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
  • Applicable for standard 1/ 4 to 3/ 4 inches and metric 7 to 19 mm/ 0.3 to 0.7 inches screws.
  • Flexible twisted and rotated: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles, which can be attached to a drill, a charging bit or a manual wrench, thus work efficiency can be improved and productivity can be increased.
  • Broad utilization: this impact socket adapter set is applicable for light drilling, slow speed or s....
Check Stock

22 Flexible Drill Extension Hex Shank Drill Bit Kit Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter Socket Bendable Drill Bit Extension Screwdriver 105 Degree Angle Drill Bit Extension

  • Nice combination: you will receive 1 piece bendable drill bit extension, 3 pieces socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 3 pieces 360 degree rotatable universal joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 pieces screwdriver bit sets, 1 piece 105 degree right angle drill extension, 1 piece socket wrench and 3 pieces magnetic screwdriver bit sets, nice and adequate to use in daily life.
  • Socket adapter set: socket adapters set and 360 degree rotatable power drill adapters set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
  • Suitable for standard 1/ 4 to 3/ 4 inches and metric 7 mm to 19 mm screws.
  • Flexible function: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles.
  • It can be connected to the drill, a charging bit or a manual wrench, thus improving you work efficiency.
  • Wide applications: this impact socket adapter set is suitable for light drilling, slow speed or screw drives, ratchet hand screwdrivers and so on, which can be applied at homes, warehouses, garages, repair shop....
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • ...10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-Piece 1/2" Drive hex bit sockets (H14, H17). 7-Piece foldable hex key wrench set (1.5, 2, 2.5, 3, 4, 5, 6mm). 12" Engineers hammer. 5M SAE/Metric tape measure. Digital tire gauge. 9” Reversible wire twist pliers. 1/4" Drive slide T-handle. 4-Piece 3/8" drive slide T-handle. Spoke wrench (1, 3, 5 and 2, 4, 6)..
  • 3/8" Drive hex axle tool (17, 19, 22, 24mm). 10mm and 13mm Spoon wrench. 32mm Spoon wrench with 22mm and 27mm insert keys..
Check Stock

Actron CP7827 Compression Tester Kit

  • Actron’s Compression Tester Kit detects worn piston rings, burnt valves, and blown head gaskets.
  • Convenient push-button side release valve allows repeated testing without the need to disconnect between tests.
  • Gauge features a 2-1/2 inch diameter, easy-to-read face with standard and metric scales: 0-300 PSI and 0-2100 kPa.
  • 17 inch, high-pressure, flexible, oil and grease resistant hose features a quick release connection at the gauge for faster, easier use.
  • 14mm and 18mm ends fit most thread sizes while included 14mm long reach adapter is perfect for many late model vehicles wth deeply recessed spark plugs.
Check Stock

Metric 10x1 (f) to 1/8\ NPT (m) adapter

  • Brass adapter threaded M 10x1 (f) to 1/8" NPT (m).
  • Certain Milwaukee 18v grease guns ship with a hose that has a metric 10x1 working end. If you try to replace the coupler and the new coupler does not fit, you need this adapter.
  • NOT ALL MILWAUKEE GUNS ARE AFFECTED. Unfortunately Milwaukee has not said which batches ship with metric hoses and which ship with NPT ends, as they are supposed to. You will need to check the threads or attempt to replace the coupler to know which hose you have..
  • Does not include LockNLube Grease Coupler or grease gun hose..
Check Stock

Reed Tool MKF2 Meter Curb Box Key

  • Universal Socket, Multi-function 7mm-19mm Universal Sockets Metric Ratchet Wrench Power Drill Adapter Socket Professional Repair Tools..
  • ADVANCED DESIGN - Universal socket can self-adjust to any size from standard 1/4" to 3/4" and metric 7mm to 19mm..
  • FLEXIBLE - Mutilfunctional socket can graso the hex nut, screw eye, hook, tension screw and bolt head. Works on a power drill (adapter not included)..
  • SAVE MONEY - Come in handy, and the socket can replace your entire socket set to use in household maintenance, industry, manufacturing, construction..
  • GUARANTEED - If with any reason you are not satisfied with our product, please contact us and you can get a full refund..
Check Stock

32 Pcs Upgrade Original Thread Checker Inch & Metric - Size Gauge Measuring Tool for Imperial and Metric Nuts ，32 Male/Female Gauges - 17 Inch & 15 Metric

  • Each size has a nut and bolt checker on the same gauge. 32 male/female gauges - 17 inch & 15 metric.The Thread Checker is especially well suited for distinguishing between similar inch and metric threads..
  • Thread sizes are permanently stamped onto each gauge (inch in Black, metric in white).The individual gauges rotate freely on the wire cable for fast thread verification..
  • We've added imperial and metric specifications to make it more complete than the models available on the market.These nut & bolt thread checkers are made of strong stainless steel，Inch gauges are clear zinc plated, metric gauges are black oxide..
  • Black Oxide for Metric Size:Includes 15 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75,M14x2.0,M16x1.5,M16x2.0..
  • Zinc Plated for Inch Size: Includes 17 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-18,5/8-11,5/8-11..
Check Stock