Top Inch Split Flange Reviews

Martin 8JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 5.063\ OD, 2.5\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Browning H 24 MM Split Taper Bushing 24mm Bore

  • External key on most sizes for positive drive and greater torque carrying capabilities.
  • Double-split barrel for positive clamping.
  • Solid flange to maintain concentric bores.
  • Available in inch, metric, and spline bores. Bore range from 3/8" to 10".
Check Stock

Browning H 25 MM Split Taper Bushing 25mm Bore

  • External key on most sizes for positive drive and greater torque carrying capabilities.
  • Double-split barrel for positive clamping.
  • Solid flange to maintain concentric bores.
  • Available in inch, metric, and spline bores. Bore range from 3/8" to 10".
Check Stock

Browning H 12 MM Split Taper Bushing 12mm Bore

  • External key on most sizes for positive drive and greater torque carrying capabilities.
  • Double-split barrel for positive clamping.
  • Solid flange to maintain concentric bores.
  • Available in inch, metric, and spline bores. Bore range from 3/8" to 10".
Check Stock

Martin 6EM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 1.875\ OD, 1.875\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEMS Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Klein Tools 31873 Heavy Duty Hole Cutter Kit Includes Carbide Hole Cutters and 2 Pilot Bits in Rust-Proof Molded Plastic Case 8-Piece

  • Heavy duty, durable carbide hole cutters for long life.
  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thick.
  • Set contains: 7/8-Inch, 1-1/8-Inch, 1-3/8-Inch, 1-3/4-Inch, 2-Inch, 2-1/2-Inch, two extra pilot bits.
  • Split point pilot drill bit prevents bit walking.
  • Integrated flange prevents the operator from drilling beyond the sheet metal.
Check Stock

Toilet Flange Repair Kit - Works on 3" or 4" Cast Iron, PVC or ABS Toilet Flanges with Broken Bolt Rails

  • REPAIR BROKEN BOLT RAILS on a 3" or 4" Cast Iron, PVC or ABS solid toilet flanges. (will not work on PVC with metal outer ring).
  • SUPER STRONG ALUMINUM ALLOY that will not rust or corrode. Split ring design. Does not restrict flow of existing pipe. (Do NOT hit with hammer! Use rubber mallet if needed).
  • FOR PROPER INSTALLATION you must have 3/8" clearance between flange and flooring. Broken flange must be completely free of trash or debris around and under broken flange. (putty knife works best).
  • CAN BE INSTALLED IN MINUTES once existing flange is cleaned and prepped. (Search YouTube for our installation videos).
  • DESIGNED BY A PLUMBER for plumbers or DIY'ers so you don't have to replace the whole flange..
Check Stock

Klein Tools 31872 Heavy Duty Hole Cutter Kit, Includes Carbide Hole Cutters and Pilot Bit in Rust-Proof Molded Plastic Case, 4-Piece

  • Heavy duty, durable carbide hole cutters for long life.
  • Hole Cutters cut quick precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thick.
  • Split point pilot drill bit prevents bit walking.
  • Set contains: 7/8-Inch, 1-1/8-Inch, 1-3/8-Inch plus one extra pilot bit.
  • Integrated flange prevents the operator from drilling beyond the sheet metal.
  • Conduit and pipe sizes: 1/2-Inch (1.3 cm) to 1-Inch (2.5 cm).
  • All components are packed in a rust-proof, molded plastic carrying case.
Check Stock

Klein Tools 31852 Heavy Duty Hole Cutter, 7/8-Inch Carbide Hole Cutter Cuts Stainless Steel, Mild Steel, Iron, Copper, Brass

  • Heavy duty, durable carbide hole cutters for long life.
  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper, and brass sheet up to 3/16-Inch (0.5 cm) thick.
  • Split point pilot drill bit prevents bit walking.
  • Integrated flange prevents the operator from drilling beyond the sheet metal.
  • Conduit and pipe sizes: 1/2-Inch (1.3 cm).
Check Stock

Century 2 HP Pool and Spa Pump Motor, Permanent Split Capacitor, 3450 Nameplate RPM, 230 Voltage, 56Y Frame - B855

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock

Martin ML095BLK 7/16 Universal Series Jaw Coupling, Sintered Steel, Inch, 0.438\ Bore A, 0.438\ Bore B, 2.125\ OD, 1\ Length, 189 in-lbs Nominal Torque

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock