Top Inch Inlet Exhaust Tipss Reviews

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....

Check Stock

Upower 2 inch Inlet Exhaust Tip Burnt Muffler 3 inch Outlet, 2' to 3' 14.6' Length Exhaust Tip Universal For Car Truck

Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.6 inch, Exhaust Muffler body width 4 inch.
2 in 1 Design: This is a 2 inch muffler resonator with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
High Quality Material: Upower exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made by premium cotton helps absorbing sound and producing a low, deep tone, durable and Anti-corrosive, never Rusty.
Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe..
Note: 1 Year Warranty, No instruction is included. Professional installation is highly recommended..

Check Stock

Q1-TECH, Universal 4' Burnt Tip JDM N1 Style Muffler Hi Flow Stainless Steel Weld-On 2.5' Inlet , Muffler , Removable Silencer Pre-attached , Deep and Smooth tone

✅Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit . and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp..
✅Feature: Polished stainless steel, The muffler is 2.5 inch inlet, 4 inch outlet, 19 inch length just need to measure the inlet of your car before purchase..
✅Straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability..
✅Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound..
✅Package includes: 1 x Exhaust Muffler, Includes removable silencer OUTLET TIP 4", INLET TIP 2.5".

Check Stock

EVIL ENERGY 3' Inlet 3' Outlet Exhaust Muffler Center Straight Through 13.8' Length Stainless Steel with Exhaust Muffler Clamp

3inch Inlet/Outlet Exhaust Center Muffler, as long as your exhaust pipe is 3.0inch and have enough space to install, it will be fit..
Size: 3.0 inch inlet to 3.0 inch outlet straight through Round design, Overall Length: 13.77 inch, Body Diameter: 3.98 inch. Material: Stainless Steel. Please measure before purchase..
Straight-Through Performance Exhaust Muffler feature a free-flowing stainless steel perforated straight pipe wrapped with fiberglass to produce a low, deep tone, aggressive to enhance the sound. With different RPM, there will be a different sound experience..
Straight-through design does not restrict exhaust flow and helps cut back pressure. Easy to install. Welding is highly recommended..
EVIL ENERGY provides 3-month warranty for this polished stainless steel mid muffler. Professional installation is highly recommended..

Check Stock

Jinsanity Performance Dual Exhaust Tip 2.5 Inch Inlet 3.5'x2 Outlet 10' Length Stainless Polished.(Double rolled, angle,welding) - 1 pair(Left and Right)

Design: Weld On – Rolled Edge – Angle Cut..
Wide Application: Fits 2.25″ Inlet diameter car exhaust tail pipe..
2.25″ Inlet 2-1/4 inch exhaust tail pipe rectangle tips for universal use..
1 Year Warranty: No instruction is included. Professional installation is highly recommended..

Check Stock

Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5' to 4' Exhaust Tailpipe Tips 9' Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End (Pack of 2)

【Upower Exhaust Tip Dimension】2.5 inch inlet diameter.
Overall Length:9 inch(2pcs Exhaust Tip are same).
【Design】Weld On - Exhaust Tip Straight Cut- Rolled End.
【Material】High Quality Exhaust Tip Tailpipe built with Stainless steel with black coating. Durable and Anti-corrosive,never Rusty..
【Wide Application】Universal fits any 2 1/2" Outlet or 2.6" Inlet trucks car exhaust tail pipe..
【1 Year Warranty】No instruction is included. Professional installation is highly recommended..

Check Stock

Upower Dual Exhaust Tips 2.25 inch inlet 3 inch outlet 9.2" Long Vacuum Plating Blue 304 Polished Stainless Steel Weld on Staggered Exhaust Tailpipe Tips 2.25" to 3"(Pack of 2)

【Design】2.25 ID Weld On - Double Wall Angled Cut - Rolled Edge-Staggered-Offset Exhaust tips.
【Material】Mirror Polished T304 Stainless Steel Exhaust Tip.High Quality Vacuum Plating Blue.Durable and Anti-corrosive,never Rusty..
【Wide Application】Universal fits trucks pickup car with 2.25" INLET Exhaust Tailpipe Tips system. NOTICE: Before purchasing, Pls kindly check the size of your factory exhaust tip..
【1 Year Warranty】Pack of 2 dual exhaust tips.
No instruction is included. Professional installation is highly recommended..

Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..

Check Stock

Exhaust Tip 2.50 Inlet 6.00 Outlet 12.00 Long Slant Chrome Wesdon Exhaust Tip

Exhaust Tip 2.50" Inlet 6.00" Outlet 12.00" Long.
Fits a 2.50 Exhaust Pipe 2.50 inlet 6.00 Inch Outlet.
Polished .001 Bright Nickel Chrome Plated (Please measure to make sure it fits your Truck).

Check Stock

Exhaust Tip 2.50 Inlet 6.00 Outlet 18.00 Long Slant Chrome Wesdon Exhaust Tip

Exhaust Tip 2.50" Inlet 6.00" Outlet 18.00" Long.
Weld Or Clamp On Style 2.50" Inlet ( Clamp not included ).
Fits a 2.50 Exhaust Pipe 2.50 inlet 6.00 Inch Outlet.
Polished Bright Nickel Chrome Plated (Please measure to make sure it fits your Truck).

Check Stock

Exhaust Tip 2.50 in Inlet 8.25" X 2.25" Rectangle 8.25 in Long Challenger Dual Slanted Split Stainless Steel WMPRSCH250-SS Wesdon Exhaust Tip

Exhaust Tip Challenger 2.50 in Inlet 8.25" X 2.25" Rectangle 8.25 in Lg Dual Slant Split.
Fits a 2.50 Inch Exhaust Pipe 2.50 Inlet.
1 Split Stainless Steel Exhaust tip included.
Challenger Aftermarket Reproduction ( Not a OEM ) (Please measure to make sure it fits your Car or Truck ) 2.50 inlet.

Check Stock

Peastorm Glasspack 3 Inch Muffler Exhaust Pipe, Universal Performance Resonator Dual Loud Exhaust Tip 3 Inch Inlet for Trucks Car

Universal performance mufflers 3" OD inlet/outlet 15.5" long 4.3" round body width, as long as your exhaust pipe is 3 inch and have enough space to install, it will be fit..
Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm..
The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference..
Stainless steel construction provides long-lasting durability, withstands high exhaust temperature..
This product needs to be welded or linked with clamps, and professional installation is strongly recommended..

Check Stock

Peastorm Glasspack 2.5 Inch Muffler Exhaust Pipe, Universal Performance Resonator Dual Loud Exhaust Tip 2.5 Inch Inlet for Trucks Car

Universal performance mufflers 2.5" OD inlet/outlet 15.5" long 4" round body width, as long as your exhaust pipe is 2.5 inch and have enough space to install, it will be fit..
Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm..
The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference..
Stainless steel construction provides long-lasting durability, withstands high exhaust temperature..
This product needs to be welded or linked with clamps, and professional installation is strongly recommended..

Check Stock