Top Inch Hole Punches Reviews

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • ... Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
  • Apply lubricant (not included) after use to reduce friction, ensure a clean cut, and prolong tool life.
  • SIMPLE STORAGE: Heavy-duty 8.75” x 4.6” x 2” inch (22.2cm x 11.7cm x 5.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) metal punch tool, (7) p....
Check Stock

Scrapbook Papers 20 Double-Sided Prints 8” x 8” Non-Perforated Sheets Mardi Gras Edition: Crafting, Scrapbooking, Collage Arts Paper Book Package

  • ...aging provides more possibilities and creativity. Including 3/8 inch circle punch, 5/8 inch circle punch, 1 inch hole punch, 1.5 inch hole punch, 2 inch hole punch. Creating circle shape for your DIY crafts, scrapbooks, photo album and more..
  • ⭕【DURABLE AND STURDY PAPER PUNCHES】These paper hole punch are made of ABS material and aluminium alloy, internal spring device makes the circle hole punch easy and comfortable to use, easier to get a clear shape from cardstock or paper. Sliding cover at the bottom of the round punch can protect the blade and prevent you from cutting yourself. Also you can open the slider for more accurate cutting action, But please pay attention to safety, especially when children use it..
  • ⭕【CONVENIENT AND EASY TO USE】The craft hole punch is easy and comfortable to operate thanks to the strong and broad handle. Just place the paper into the circle paper punch slot and press the handle down once, you can get a clean cut round shape card, punches cleanly every time for consistently great designs..
  • ⭕【WIDE APPLICATIONS】Circle paper cutter is simple to use and will make perfectly shaped de....
Check Stock

UCEC Hexagon Punch 2 Inch Paper Punch Circle Cutter for Paper Crafts Large Hole Punch Paper Punch Shapes for Crafting Scrapbooking Cards Arts Fun Projects

  • ⭕【2 INCH HEXAGON PAPER PUNCH】 Large paper punches with unique appearance shape is a great basic to have on hand for scrapbooks, cards,....
  • ⭕【DURABLE AND STURDY PAPER PUNCHES】These hexagon hole punch are made of ABS material and aluminium alloy, internal spring device makes the....
  • ⭕【CONVENIENT AND EASY TO USE】The paper punches for crafting is easy and comfortable to operate thanks to the strong and broad handle. Just place....
  • ⭕【WIDE APPLICATIONS】Hole puncher for crafts is simple to use and will make perfectly shaped designs from card-stock, paper, cardboard, felt, EVA....
  • ⭕【PERFECT GIFTS】For punched out images to decorate cards, envelopes, kids artwork, scrapbook pages, photo frames decor, origami, gift wrap,....
Check Stock

UCEC Hexagon Punch 3 Inch Paper Punch Circle Cutter for Paper Crafts Large Hole Punch Paper Punch Shapes for Crafting Scrapbooking Cards Arts Fun Projects

  • ⭕【3 INCH HEXAGON PAPER PUNCH】 Large paper punches with unique appearance shape is a great basic to have on hand for scrapbooks, cards,....
  • ⭕【DURABLE AND STURDY PAPER PUNCHES】These hexagon hole punch are made of ABS material and aluminium alloy, internal spring device makes the....
  • ⭕【CONVENIENT AND EASY TO USE】The paper punches for crafting is easy and comfortable to operate thanks to the strong and broad handle. Just place....
  • ⭕【WIDE APPLICATIONS】Hole puncher for crafts is simple to use and will make perfectly shaped designs from card-stock, paper, cardboard, felt, EVA....
  • ⭕【PERFECT GIFTS】For punched out images to decorate cards, envelopes, kids artwork, scrapbook pages, photo frames decor, origami, gift wrap,....
Check Stock

General Tools Revolving Punch Pliers - 6 Multi-Hole Sizes for Leather, Rubber, & Plastic - Hobbies & Crafts

  • HEAVY DUTY PUNCHES: The General Tools rotary puncher is made of plated steel with a sharp circular knife-like edge for stronger punches. The pliers feature an asymmetric handle and ergonomic grip for superior comfort and control..
  • BELT HOLE PUNCHER: Our versatile gadget can also be used for making round holes in cardboard, denim, cloth, and canvas. The novel compound-joint design requires less effort than other hole punches do..
  • FABRIC HOLE CUTTER: Make little punches with a single-style force to your belt, purse or watch strap, pet collar, shoulder bag, or a DIY project. The hand tool is self-opening, revolving, and strong yet accessible and convenient for unisex use..
  • DIFFERENT SIZE HOLE PUNCHER: Learn the art of crafting with our non-clogging punch sizes ranging from 5/64.
Check Stock

Kanroot 41817 Double Pocket Pliers Top Grain Leather Holster

  • HEAVY DUTY PUNCHES: The General Tools rotary puncher is made of plated steel with a sharp circular knife-like edge for stronger punches. The pliers feature an asymmetric handle and ergonomic grip for superior comfort and control..
  • BELT HOLE PUNCHER: Our versatile gadget can also be used for making round holes in cardboard, denim, cloth, and canvas. The novel compound-joint design requires less effort than other hole punches do..
  • FABRIC HOLE CUTTER: Make little punches with a single-style force to your belt, purse or watch strap, pet collar, shoulder bag, or a DIY project. The hand tool is self-opening, revolving, and strong yet accessible and convenient for unisex use..
  • DIFFERENT SIZE HOLE PUNCHER: Learn the art of crafting with our non-clogging punch sizes ranging from 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16". This quality rotary tool is perfect for a home hobby or commercial use..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Edlund 50SS Stainless Steel King Size Can Punch/Bottle Opener

  • Material: Electro-Polished Stainless Steel.
  • Large Easy Grip HandleDescriptionEdlund king size can punch / bottle opener is ideal for opening both cans and bottles. Punched hole five times the normal size of regular can punches.Material: Electro-Polished Stainless Steel Punches Hole 5 Times Bigger Ideal for both Cans and Bottles King Size Large Easy Grip Handle Model &num.
Check Stock

Press n Snap Tool Ligne Line 24 Snap Setter Upholstery Sewing Cosplay Costuming Leather Work

  • Durable and reliable heavy duty grommet, snap buttons, rivet, eyelet , pearl button hole punch press machine . This machine is an all in one tool..
  • Interchangeable dies, hole punches and supplies ( Grommets, studs, rivets, snaps, jeans button, eyelets, pearl rivets etc) are sold separately..
  • You can punch holes with the interchangeable hole punches on products such as clothes, bags, shoes, belts..
  • This machine uses 6.35 mm (1/4" ) thread size dies. Please make sure that this matches your dies/hole punches thread size. Any doubt? Please contact....
  • There are 3 available colors . A random color of Red, Navy or Blue will be shipped.
Check Stock

3 Pcs Star Punch 1-Inch 1-1/2-Inch 5/8-Inch Paper Punchers Scrapbook Crafts Paper Punch

  • What you get: package includes 3 pieces craft Star paper punches, Punch out size:3.8cm/ 1.5 inch, 2.5 cm/ 1 inch, 1.5 cm/ 5/8 inch，The craft hole punch is made of ABS and alloy, durable and long time to use, comes in random color.
  • Easy to use: spring-action lever makes the craft circle punch easier and comfortable to use, easy get circle shape from card-stock, punches cleanly every time for consistently great designs.
  • Please use 70G-230g paper jam. If your paper is too thin,please use 2-3 layers.do not use the Sticky paper to avoid make the punch Get stuck.
  • Unique original appearance shape, compact design locks shut for storage and slip-resistant. Spring-action lever makes the punch easier,save yourself from trouble of cutting by hand..
  • Many available shapes, also can use with other nesting punches to create perfectly graduating layers.Perfect for kids' DIY artwork, gift wrapping, envelopes, memory books, greetingcards, gift tags, scrapbooks, cards, decorations and any paper craft..
Check Stock

Slot Punch Badge Hole Punch Plier Tool for PVC ID Card Hand Held (Punch)

  • Badge Hole Slot Punch has approx 3/32 inch jaw opening and designed for up to 40 mil cards.
  • This tool punches a slot approx 9/16 X 1/8 inch, starting 11/32 inch from edge of card.
  • Slot Size (L x W): Approx 15 x 3 mm Puncher Size (L x W): Approx 13.7 x 7 cm.
  • Heavy Duty - Spring Design Adds Extra Strength for clean punches.Visible Knife edge allows for checking the position of the card before punching..
  • Smooth clean punch, Perfect size for badge clipsYour satisfaction is always our top priority. Anything we can help, please contact us freely..
Check Stock

Gardner Bender KOS-500B Slug-Out Mechanical Knockout Set, Contractor Punch, Die & Drive Screw, ½\ Conduit Pipe Size Cutting Diameter, 10 AWG Mild Steel & 12 AWG Stainless Steel

  • Four-point punch design allows slug to fall free from the die without splitting, tapping or prying.
  • Punches 10 gauge mild and 12 gauge stainless steel.
  • Punches hole designed for 1/2 Inch pipe or conduit.
Check Stock

Swingline Replacement Punch Head for LightTouch Desktop Punches, 9/32 Inch Hole Size, 1 Punch Head, Silver (A7074870E)

  • Compatible with Swingline LightTouch and EasyView LightTouch Desktop Punches only (sold separately).
  • Maintain precise cutting and top performance.
Check Stock