Top Inch Flange Bearing Reviews

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

Bettomshin 2Pcs 51100 Thrust Ball Bearings with Washers 10mm Bore 24mm OD 9mm Width GCr15 Thrust Bearing for Wind Spinners Slicers CNC Retrofits

  • 【Parameter】Type: Thrust Ball Bearing.
  • 【Material】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness..
  • 【Capability】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads. They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact..
  • 【Features】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Applications】Can be used for jack, pump, rotating applications, machine tools ect..
Check Stock

Pillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, (2 Pack -UCFL204-12)

  • Cast iron UCFL204-12 flange block housing increases life of the bearing.
  • pillow block bearing 3/4 UC204-12 chrome steel bearing for efficient operations at a wide range of speeds.
  • pillow block bearing 3/4 inch shaft Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN.
  • pillow block bearing Set screw prevents shaft slippage.
  • Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F.
Check Stock

Century 2 HP Pool and Spa Pump Motor, Permanent Split Capacitor, 3450 Nameplate RPM, 230 Voltage, 56Y Frame - B855

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock

Complete Rear-End Bolt-On Rear Disc Brake Kit Conversion, Universal, Fits Ford 9-Inch

  • Disc brake stopping power for your Ford 9 inch or 8 inch rearend at nearly the same cost as rebuilding/replacing drum brakes.
  • Kits includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers (non-emergency brake), brake pads and hardware for increased stopping power.
  • Fits over an axle with maximum flange diameter of 6-1/4" O.D..
  • Rotors have a 2.780" center hole with both 5 on 4-1/2" and 5 on 4-3/4" bolt circles.
  • Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".
Check Stock

Regal Beloit B2855 Century 2 Horsepower 230V 3450 RPM Stainless Steel Continuous Single Phase Pool Pump Motor with Square Flange for Inground and Above Ground Pools

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock

Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGW25 linear guide rail set includes 2Pcs HGW HGR25-2950mm（116.14 inch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you....
Check Stock

10 PCS Stainless Steel Roller Ball Transfer Bearing, FERCAISH Universal Rotation Ball Casters Round Ball Transfer Units for Transmission Roller Stand Roller Stand

  • Package Content: 8 x Nylon Roller Ball Transfer Bearings Flange Mounted 1/2 Inch + Screws..
  • Dimension: Roller Ball Diameter: 1/2 inch. Total Size: 48*32*20mm/ 1.89*1.26*0.79 inch (L*W*H). Mounting Hole Dia: 4mm/0.157"..
  • Material: Made of high quality carbon steel, good wear resistance, not easy to wear. Each ball transfer bearing with a load capacity of 22 lbs..
  • Application: Only use for bearing side up, not for use as castor wheels. Used in conveyor lines installing, transmission system, processing system, workbench, etc..
  • Quality After Sale Service: Satisfying customers is BokWin's top priority. If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. Free Replacement or Refund within 90 days..
Check Stock

A-Premium Set of 2, Front Wheel Bearings and Hub Assembly, Compatible with Subaru Forester 2019-2022, Impreza 2004-2014, Legacy 2015-2020, Outback 2015-2020, WRX STI 2013-2015, Replace # 513302

  • [Vehicle Fitment]: Compatible with Subaru Ascent 2019 ✔ Forester 2019-2022 ✔ Legacy 2015-2020 ✔ Outback 2015-2020 ✔ WRX STI 2013-2015 ✔.
  • [Vehicle Fitment]: Compatible with Subaru Impreza 2004-2014 (WRX STI Only) ✔ Impreza 2007 (WRX STI Limited Only) ✔ Impreza 2010 (WRX STI Special Edition Only) ✔.
  • [Reference Number]: 28373AL00A, 28373FE001, 28373VA000, 28373VA010, 28373VA020, 28373VC000, 513302, H513302.
  • [Specification]: ① Bolt Circle Dia: 114.5mm.
  • [Package Details]: 1 x Front Wheel Bearing Hub Assembly for Left.
  • 1 x Front Wheel Bearing Hub Assembly for Right (with 1-Year Warranty).
Check Stock

ZSKL - 2 PACK-7/8\ UCFL 205-14 Premium Quality Two Bolt Flange Bearing 7/8\Bore Self-Alignment Farm Machinery Conveyor Manufacturing Equipment Automotive Agriculture Pump

  • EASY TO INSTALL: UCFL205-14, ZSKL 2 pack of premium quality two bolt flange bearing contains 2 kilograms of wait. Easy and convenient to place at its required place..
  • APPLICATION: Two bolt Flange Mounted Bearings, bearing for efficient operations at a wide range of speeds.
  • SIZE: 7/8" Bore size. It is made of very high-quality material and specially made to reduce your replacement frequency and maintenance cost..
  • SHAFT LOCKING TYPE: Set Screw. It is ideal for higher resistance and durability. It will surely satisfy all your needs..
  • EASY TO PLACE: Bearing Insert Material 52100 Chrome Steel. Easy and enough convenient to place at its required place..
Check Stock

[2-Pack] SBTRD204-12 - 3/4\ Bore 3-Bolt Mounted Flange Block Unit, Bearing SB204-12G, Cast Iron Housing TRD204, Bolt Size M8 (0.3125 inches)

  • ✔️ [Parts] - 3-Bolt Mounted Flange Block Unit.
  • ✔️ [Insert Bearing] - Bearing Number SB204-12G, Inner Diameter 3/4".
  • ✔️ [Housing] - Cast Iron Housing TRD204.
  • ✔️ [Quantity in Package] - 2 Pieces of 3-Bolt Mounted Flange Block Unit.
Check Stock

USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

  • Replacement T-5 bearing retainer with steel throw-out bearing sleeve....
  • Fits production and Ford Racing T-5 transmissionsSmoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent....
Check Stock

OTC 6540 Rear Axle Bearing Puller Set - 8 Piece

  • Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks.
  • Includes 3 sizes of rear axle bearing pullers.
  • Slide hammer tee bar and Slide hammer 5 LB head weight.
  • Pulling hook rear axle pulling plate and bearing cup remover.
Check Stock