Top Inch And A Half Hose 2 Reviews

Gold Cube 4 Stack Deluxe Gold Sluice - Gold Mining

  • This piece of Gold Mining Equipment is specially made to recover fine gold..
  • Unique G-Force technology cleans and separates the gold..
  • Gold Cube 4 Stack Deluxe includes 1 Slick Plate, 3 Separator Trays, Stand, Pump, Hose, Hose Adapters..
  • Gold Cube processes tons of concentrates into mere ounces-- FAST! Nugget Zone for Gold Cube sold separately..
  • The Gold Cube can run a yard of material (classified down to 1/8 inch) in about 2 hours. You can also run half a ton of material through the Gold Cube before you have to stop for a clean up. The Gold Cube is made in the USA!.
Check Stock

Lola Goes Mining

  • This piece of Gold Mining Equipment is specially made to recover fine gold. The Trommel top unit completely spins and washes your gold-bearing dirt and gravel. Gold Cube 3 Stack Deluxe with Trommel includes: 1 Slick Plate, 2 Separator Trays, Stand, Pump, Hose, Hose Adapters, and 5 inch Trommel for the top..
  • The Trommel topper is self jigging to the Gold Cube. It consist of a 12 volt 5 inch diameter trommel top unit with a 16'' long barrel and a 3/16'' classifying screen. You also get an adapter plate to attach the trommel to the Gold Cube and an angle adjustment bar for adjustable pitch. The Trommel can also be taken off when you need to use the Cube by itself..
  • The Trommel's hopper and barrel both have a sprayer so cleaning your material is automatic as well as also providing the proper amount of water to the Gold Cube. New and improved trommel has spray bar on outside of barrel to allow more area inside..
  • Unique G-Force technology in Gold Cube cleans and separates the gold. The Gold Cube is made in the USA! TROMMEL SHIPS IN SEPARATE BOX FROM GOLD CUBE!.
Check Stock

Thunder Gods Gold

  • This piece of Gold Mining Equipment is specially made to recover fine gold. The Trommel top unit completely spins and washes your gold-bearing dirt and gravel. Gold Cube 3 Stack Deluxe with Trommel includes: 1 Slick Plate, 2 Separator Trays, Stand, Pump, Hose, Hose Adapters, and 5 inch Trommel for the top..
  • The Trommel topper is self jigging to the Gold Cube. It consist of a 12 volt 5 inch diameter trommel top unit with a 16'' long barrel and a 3/16'' classifying screen. You also get an adapter plate to attach the trommel to the Gold Cube and an angle adjustment bar for adjustable pitch. The Trommel can also be taken off when you need to use the Cube by itself..
  • The Trommel's hopper and barrel both have a sprayer so cleaning your material is automatic as well as also providing the proper amount of water to the Gold Cube. New and improved trommel has spray bar on outside of barrel to allow more area inside..
  • Unique G-Force technology in Gold Cube cleans and separates the gold. The Gold Cube is made in the USA! TROMMEL SHIPS IN SEPARATE BOX FROM GOLD CUBE!.
Check Stock

Gold Cube + Accessories - Gold Mining Equipment (Gold Cube 3 Stack Deluxe + Trommel)

  • This piece of Gold Mining Equipment is specially made to recover fine gold. The Trommel top unit completely spins and washes your gold-bearing dirt and gravel. Gold Cube 3 Stack Deluxe with Trommel includes: 1 Slick Plate, 2 Separator Trays, Stand, Pump, Hose, Hose Adapters, and 5 inch Trommel for the top..
  • The Trommel topper is self jigging to the Gold Cube. It consist of a 12 volt 5 inch diameter trommel top unit with a 16'' long barrel and a 3/16'' classifying screen. You also get an adapter plate to attach the trommel to the Gold Cube and an angle adjustment bar for adjustable pitch. The Trommel can also be taken off when you need to use the Cube by itself..
  • The Trommel's hopper and barrel both have a sprayer so cleaning your material is automatic as well as also providing the proper amount of water to the Gold Cube. New and improved trommel has spray bar on outside of barrel to allow more area inside..
  • Unique G-Force technology in Gold Cube cleans and separates the gold. The Gold Cube is made in the USA! TROMMEL SHIPS IN SEPARATE BOX FROM GOLD CUBE!.
Check Stock

Lixit L100 Water Faucet Automatic Fountain for Dogs and Other Pets Pack of 1

  • AUTOMATIC WATERER ADAPTOR -The Lixit L100 turns any hose into a self-watering device for your pet. It's durable design, resists rusting and corrosion....
  • COMPATIBLE WITH STANDARD HOSE AND PIPE SIZE - Screws into a standard half- inch pipe fitting or hose. Please note these will NOT work on anti siphon....
  • TONGUE TRIGGERED - Delivers a tongue-triggered supply of fresh water that conserves water when not in use..
  • EASY TO INSTALL - No tools or other installation needed..
  • GREAT FOR A VARIETY OF PETS - Ideal for dogs and other larger or medium size pets..
Check Stock

Suncast 225 Foot Smart Trak Hose Hideaway Yard Storage Holder Bin, Light Taupe

  • Built with space to store 225 feet of 5/8-inch standard vinyl hose.
  • Built-in crank makes for easy reeling with half the effort.
  • Smart Trak hose guide tracks hose neatly onto reel.
  • Sturdy resin construction to stay strong through outdoor weather.
  • Large storage bin provides place to store accessories.
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch, 1/2 inch, 3/8 inch, 5/8 inch, 1 inch, 2 inch, 1-3/5inch, 2-1/2 inch. Stainless steel clamps with various size can meet your different clamping requirements..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applic....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

HOSPAIP Garden Hose 50 ft Water Hose with 10 Function Hose Nozzle, Expandable Garden Hose with Hose Holder, Flexible Lightweight Water Pipe with Brass Fittings, Expanding Car Wash Hose (Green)

  • ... hose nozzle supports 10 patterns to fulfill your different watering purposes. Rotating bezel to choose the kind of nozzle you need: Full, Flat, Shower, Cone, Jet, Soaker, Angle, Mist, One Half Vertical and Center. The spray nozzles for garden hose with non-slip handgrip makes it effortless for operation..
  • Solid 3/4 Inch Brass Connectors: The flexible garden hose is equipped with a 3/4 inch American standard solid brass joint and leakproof rubber gasket, which precisely help you get rid of common pipe leaks, cracks and rust. You can connect all faucets for a thread size of 3/4 inches, or use an extra adapter to fit with our leakproof gardening hose..
  • Wide Application and Easy to Store: This kink free expandable 50ft garden hose is suitable for all of your outdoor watering needs, including house, car, floor, yard washing, garden watering, even pet cleaning. You just drain water from the shrink hose when not in use. And use the equipped storage bag to store your lightweight water hose 50 ft out of direct sun, or rewind the garden water pipe into a hose hanger for store..
Check Stock

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!.
  • One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value fo....
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

Gold Cube + Accessories - Gold Mining Equipment (Gold Cube 4 Stack Deluxe + Trommel)

  • This piece of Gold Mining Equipment is specially made to recover fine gold. The Trommel top unit completely spins and washes your gold-bearing dirt and gravel. Gold Cube 4 Stack Deluxe with Trommel includes: 1 Slick Plate, 3 Separator Trays, Stand, Pump, Hose, Hose Adapters, and 5 inch Trommel for the top..
  • The Trommel topper is self jigging to the Gold Cube. It consist of a 12 volt 5 inch diameter trommel top unit with a 16'' long barrel and a 3/16'' classifying screen. You also get an adapter plate to attach the trommel to the Gold Cube and an angle adjustment bar for adjustable pitch. The Trommel can also be taken off when you need to use the Cube by itself..
  • The Trommel's hopper and barrel both have a sprayer so cleaning your material is automatic as well as also providing the proper amount of water to the Gold Cube. New and improved trommel has spray bar on outside of barrel to allow more area inside..
  • Unique G-Force technology in Gold Cube cleans and separates the gold. The Gold Cube is made in the USA! TROMMEL SHIPS IN SEPARATE BOX FROM GOLD CUBE!.
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 5 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes Shop Vac Adapter 2 1/2 to 1 1/4 inch and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 6 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Several for a small dust collection system. Details in photos..
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly.
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61 inches OD. More details of the other adapters in photos..
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your shop dust collection system or just to connect your vacuum to an attachment(NOTE- 2 Adapters come already connected together but come apart easily)..
Check Stock