Top In Nbr 85 Reviews

EVIL ENERGY 6AN Flare to 6AN ORB Male Fuel Rail Adapter Fitting Black 2Pcs

  • size:the thread size of 6AN is 9/16-18 UNF,the thread size of 6AN ORB is 9/16-18 UNF.
  • Sealing:The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring..
  • Material: The 6AN to 6AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.(Temperature Range: -40F° to +212F°.Maximum working pressure: 4000PSI).
  • The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc..
  • EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

FLANGE TYPE HYDRAULIC OIL TANK FILLER BREATHER 6 HOLE CAP ASSEMBLY 700 LPM X 40 MICRON

  • Polyamide based (PA) technopolymer. Cover: RAL 2004 orange, semi-matte finish, with graphic symbol "valve".
  • Threaded connector: black color, semi-matte finish.
  • Technopolymer overpressure valve with NBR synthetic rubber O-ring and stainless steel spring.
  • Suction disk: Technopolymer sealing disk with NBR synthetic rubber O-ring and stainless steel spring.
  • SFW-BA+F: with zinc-plated steel sheet bayonet, without flat dipstick. Chrome-plated steel safety chain.
Check Stock

Elesa 54911 Pressurized Breather Cap, Technopolymer, Orange Cover, Black Threaded Connector, 2.76\ Diameter, 2.48\ Length, G 3/4 Threaded Connector Size

  • Polyamide based (PA) technopolymer. Cover: RAL 2004 orange, semi-matte finish, with graphic symbol "valve".
  • Threaded connector: black color, semi-matte finish.
  • Technopolymer overpressure valve with NBR synthetic rubber O-ring and stainless steel spring.
  • Suction disk: Technopolymer sealing disk with NBR synthetic rubber O-ring and stainless steel spring.
Check Stock

Buna-N O-Ring Kit, 90A Durometer, 30 Sizes (Pack of 382)

  • [NBR O-ring]-NBR with good mechanical properties and high wear resistance. It has good resistance to many petroleum, grease, hydraulic oil, alcohol, mineral oil and grease. Nitrile rubber is susceptible to acetone, ether, ester, ozone, sunlight and weathering, so it should not be used in ozone-producing motors, welding equipment, or applications exposed to ultraviolet light..
  • [Circular Cross Section]-The nitrile rubber O-ring is round, and the cross section is round. Designed for various sealing applications. Pressure and fluid seals are usually provided between cylindrical overlapping mating surfaces, commonly found in engines, faucets, flanges, valves, and various cylinders..
  • [Features]-Soft and elastic O-ring, simple buckle, easy to install. Nitrile rubber O-rings can meet most pipeline, automotive and general maintenance needs..
  • [Easy to Use]-This nitrile rubber (NBR) sealing ring has abrasion resistance, pressure resistance, high temperature resistance, oil resistance and waterproof ring seal. You can use it in many places in your daily life and work. We have various thicknesses and sizes for you to choose from..
  • [Application]-Rubber O-rings are mainly used for power supplies, control boxes, universal power cord socket protection, electrical applian....
Check Stock

All Balls Racing 26-1601 Carburetor Rebuild Kit

  • Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit. ).
  • NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels..
  • Components included in the kits are based off of US models and discretion mube used when attempting to install the kit on a non US model..
Check Stock

All Balls Racing 26-1644 Carburetor Rebuild Kit

  • Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit. ).
  • NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels..
  • Components included in the kits are based off of US models and discretion mule used when attempting to install the kit on a non US model..
Check Stock

All Balls Racing 26-1627 Carburetor Rebuild Kit

  • Honda VTX1300 2003 - 2007. Honda VTX1300R 2005 - 2007..
  • Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit. ).
  • NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels..
  • Components included in the kits are based off of US models and discretion mule used when attempting to install the kit on a non US model..
Check Stock

Bosch Rexroth R928006374 Wire Mesh Filter Element, Cartridge Type, 1.65\ ID x 3.15\ OD x 6.30\ Tall, 25 Micron (Nominal), Without Bypass Valve; Removes Particle Contaminants and Protects Hydraulic Systems

  • Polyamide based (PA) technopolymer. Cover: RAL 2004 orange, semi-matte finish, with graphic symbol "valve".
  • Threaded connector: black color, semi-matte finish.
  • Technopolymer overpressure valve with NBR synthetic rubber O-ring and stainless steel spring.
  • Suction disk: Technopolymer sealing disk with NBR synthetic rubber O-ring and stainless steel spring.
Check Stock

Monolith THX-365T THX Ultra Certified Dolby Atmos Enabled Mini-Tower Speaker, Black

  • Main midrange driver: 2in Silk dome midrange with neodymium magnet and aluminum shorting ring.
  • Main woofer drivers: 2x 6.5 inch long fiber pulp cones with fear optimized nitrile butadiene rubber (NBR) surround and aluminum shorting ring.
  • Main tweeter driver: 1 inch silk dome tweeter with neodymium magnet and copper shorting ring.
  • Atmos woofer driver: 5.25in long fiber pulp cone with fear optimized nitrile butadiene rubber (NBR) surround.
  • Atmos tweeter driver: 7/8in Silk dome tweeter with neodymium magnet.
Check Stock

Mikuni Super BN SBN Carb Rebuild Kit Jet Ski 38 44 46 Seadoo Yamaha 451460

  • Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other....
  • NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels..
  • Components included in the kits are based off of US models and discretion mule used when attempting to install the kit on a non US model..
Check Stock

All Balls Carburetor Repair Kit 26-1143 Yamaha TTR90 2000-2005

  • Kits include all of the necessary components to repair a carburetor.
  • Atv models with two carburetors include components to repair two carburetors.
  • Kit includes all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat.
  • Nbr rubber material is used on all O-rings and rubber gaskets nbr has excellent resistance to the ethanol used in today's fuels.
  • Components included in the kits are based off of us models and discretion must be used when attempting to install the kit on a non us model.
  • Applications that use paper float bowl gaskets are upgraded to high performance interface gasket material.
Check Stock

All Balls Carburetor Repair Kit 26-1275 Yamaha YZ250F 2009

  • Kits include all of the necessary components to repair a carburetor.
  • Atv models with two carburetors include components to repair two carburetors.
  • Kit includes all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat.
  • Nbr rubber material is used on all O-rings and rubber gaskets nbr has excellent resistance to the ethanol used in today's fuels.
  • Components included in the kits are based off of us models and discretion must be used when attempting to install the kit on a non us model.
  • Applications that use paper float bowl gaskets are upgraded to high performance interface gasket material.
Check Stock

All Balls 26-1404 Carburetor Repair Kit (26-1404 Kawasaki KLX110 2006-2009)

  • Kits include all of the necessary components to repair a carburetor.
  • Atv models with two carburetors include components to repair two carburetors.
  • Kit includes all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat.
  • Nbr rubber material is used on all O-rings and rubber gaskets nbr has excellent resistance to the ethanol used in today's fuels.
  • Components included in the kits are based off of us models and discretion must be used when attempting to install the kit on a non us model.
  • Applications that use paper float bowl gaskets are upgraded to high performance interface gasket material.
Check Stock