Top In Line Amplifier Reviews

Monoprice 602520 Microphone Stand with Boom

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Rockville RV10.2B 1000w Dual 10' Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit.
  • Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones.
  • 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B..
  • High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable.
Check Stock

Lanzar B52 Car Audio Amplifier Monoblock 1 Channel 2,000 Watt 2 Ohm RCA Input Bass Boost Mobile Audio Amplifier for Car Speakers Car Electronics Crossover Network HTG137 BLACK

  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets..
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Rockville RPG082K Dual 8\ Powered PA System Speakers/Bluetooth+Mic+Stands+Cables

  • Rockville Power GIG RPG-082K (2) 8" Active DJ/PA Speakers Package. 500 Watts Peak / 125 Watts RMS / 250 Watts Program Power. Built In Class "D" Digital and Efficient Amplifier Perfectly Matched For This System. High Power 8" Long-throw Woofer with 1" high end tweeter for clear sound reproduction and awesome bass response. 25mm Compression Horn Drivers For Clear Highs..
  • Bluetooth Built In- Now you can input any audio signal from your Bluetooth enabled music player or phone. No cables necessary!. USB input plays tracks stored on a thumb drive or you can connect a USB device to the speaker. SD card slot plays tracks stored on an SD memory card . FM Radio Built-In. Combo jack XLR + 1/4" Mic Input. RCA input. RCA output. Combo jack XLR +1/4’’ Line in. XLR line output to connect a subwoofer, powered speakers, or an amplifier..
  • ¼’’ Line output to connect a subwoofer, powered speakers, or an amplifier. Built in preset equalizer curves for MP3 mode only. Master volume control. Bass control and treble control. Digital display. (1) Metal High Quality Wired Microphone Included + Mic Cable Included. Microphone ECHO control is perfect for karaoke. High quality wireless remote control included..
  • Compact and light weight system is very portable. Distortion fre....
Check Stock

Pyle PLVHL70 2-Channel High-Level To Low-Level Converter with 12V Remote Turn-On

  • RCA FUNCTION HIGH TO LOW: The Converter allows you to get RCA line level outputs from your high-level output device. It also can convert the high-voltage signal output of the amplifier or speaker to the low-voltage signal, improve sound quality.
  • ADJUSTABLE ATTENUATION: Provide the level gain adjustment. Use the adjustment rotate button, you can adjust the bass down without having to pull over and manually adjust the input level of the amplifier to the minimal one, very convenience.
  • HIGH-QUALITY SOUND: No need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing.
  • EASY TO INSTALL: Provides amplifier remote turn-on output w/out removing car stereo. Just connect the wire between the speaker & the amplifier. Red input.
  • Connect to the amp line of the right channel. White input.
  • MAXIMUM INPUT POWER: Constructed from durable aluminum alloy. 45W per channel.
Check Stock

Workout 2018 - Aerobic Hits. Music For Fitness and amp; Workout 128 Bpm / 32 Count

  • ADVANCED TECHNOLOGY: The professional series amplifiers are designed to incorporate DC to DC switching power supplies that provide headroom for even the most demanding peaks and dynamic ranges found in today's audio files.
  • INTELLIGENT DESIGN: The car audio amplifier features include power and protection LED indicators.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Silver RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • RCA JACKS: The line-out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
Check Stock

4 Rockville Cube 70v Black 3.5 Commercial Swivel Wall Mount Restaurant Speakers

  • Package Includes: (1) RockvilIe RCS80-1 60 Watt 70v Commercial/Restaurant Amplifier/Bluetooth Receiver. (3) Cube by RockvilIe Pair of 3.5" Black....
  • RockvilIe RCS80-1 60 Watt Commercial/Restaurant Amplifier 19" Rack-Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver. Capable of....
  • Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input. Bass and Treble control. 5 segments signal level indication. Built in cooling system....
  • Signal to Noise Ratio: > 79dB. Power Requirements: 120V / 50-60Hz. A Weighted Signal to Noise (@ 1W) -79.0dBA. A Weighted Signal to Noise (referenced....
  • (2) mounting brackets with metal bars. (2) safety cables. (8) screws. (1) User manual. Cube by RockvilIe - Pair of Black 3.5 70 Volt Commercial....
Check Stock

Universal Car Amplifier Bass Knob Control Via RCA RCA Audio Interconnect LC-1

  • This remote amplifier level control adds sub-woofer level controls or balances a multiple amplifier installation.
  • Fine tunes the volume of any RCA line level signal you wish to control.
  • Connect the RCA from the output of this controller to the amplifier, and wire the car stereo output to the RCA input of this unit.
  • Dash mount amplifier level control for Volume Adjustment.
  • Can adjust the amplifier gain while driving.
  • Perfect for balancing the system to change music styles.
  • Simple in and out connections, no additional wiring needed.
Check Stock

Rockville Rock Shaker 10\ Inch Black 600w Powered Home Theater Subwoofer Sub

  • Features: Rockville Rock Shaker 10 Black 600 Watt Powered 10" Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear firing port is engineered for optimal sound.
  • Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
  • Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
  • Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS....
Check Stock

LZSIG Home Audio Amplifier Stereo Receivers with Phono Inputs,Bluetooth,RMS 240W,2.1-CH FM for Power Amplifier Stereo System,UPG for Active Subwoofer,Turntable,Vinyl Record Player

  • 240 WATTS TOSHIBA POWER TUBE - LZSIG home stereo amplifier receiver is driven by 4 Toshiba large power tubes to achieve 120W(L) channel+120W(R) 2.1 channel combination. Frequency response range:20-15000Hz,signal-to-noise ratio is as high as 82dB. Recommended to match a pair of dual 6.5-inch to 10-inch floor-standing front passive speakers to amplify and enjoy your home audio experience in the comfort of your home.
  • UPGRADED VERSION for PHONOGRAPH - The sound amplification mixer device can perfect match the MM or MC type phonograph.When using the MC type, please press the rear switch button.Furthermore,this home audio receiver is compatible with vinyl record player, active subwoofer, passive bookshelf speaker, front speaker, surround speaker, outdoor speaker, smartphones, iPads, iPhones and computers, which is widely used in home audio, bedroom, conference, karaoke, bar, etc.
  • 2.1 channel design - In addition to the left and right stereo design, the dual-channel multifunction digital stereo amplifier receiver also adds a bass output channel to form a 2.1 channel stereo + subwoofer wall of sound effect with various active subwoofers, allowing you to enjoy extraordinary professional sound quality. With Auto FM radio, digital LED display, RCA line in and lin....
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Rockville Rock Shaker 10\\\ Inch Wood 600w Powered Home Theater Subwoofer Sub, Rock Shaker 10 Wood

  • Features: Rockville Rock Shaker 10 Wood 600 Watt Powered 10" Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear firing port is engineered for optimal sound.
  • Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
  • Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
  • Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS ....
Check Stock