Top Improved Build Plate Reviews

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

  • and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
  • ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standards.
  • ✅BRIGHTNESS: We improved these trailer lights, compared with the old vision, these trailer lights are brighter. Brighter lights are safer in any environment such as Sand, Water, Dirty, Snow and Dusty Place..
Check Stock

Schutt Sports Varsity XV HD QB/WR Shoulder Pad, X-Large

  • Features high-density EVA foam for greater impact absorption and durability.
  • This pad has a clavicle channel system to help with impact specifically around the AC joint.
  • The pad is designed to be low profile for improved mobility and is the lightest varsity shoulder pad we can build while maintaining pro-level standards.
  • QB/WR offers an attached back plate and smaller arch cut to reduce the plastic that gets in your way.
  • The arch cut gives you maximum range of motion and versatility.
Check Stock

Schutt Sports Varsity XV HD Shoulder Pad, Football Gear and Accessories, Quarterback/Wide Receiver, Medium

  • Features high-density EVA foam for greater impact absorption and durability.
  • This pad has a clavicle channel system to help with impact specifically around the AC joint.
  • The pad is designed to be low profile for improved mobility and is the lightest varsity shoulder pad we can build while maintaining pro-level standards.
  • QB/WR offers an attached back plate and smaller arch cut to reduce the plastic that gets in your way.
  • The arch cut gives you maximum range of motion and versatility.
Check Stock

HICTOP Upgrades Flexible Build Plate PEI Steel Sheet Textured Bed Works for CR-10 CR-10S CR-10S pro CR-10 V2 V3 and Other Same Sized 3D Printers 310 * 310

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for....
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.....
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives.....
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges....
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

MINGDA Magnetic Build Plate Flexible Removable Bed Platform Build Surface Mat for 3D Printer 325x325mm

  • 【MINGDA Original Plate】MINGDA original removable build plate platform for 3d printing.
  • 【Fast Heating】Use advanced tech, which has good thermal conductivity, it will heat up to 90℃ in5 minutes. The first layer is easier to stick on....
  • 【Perfect for build】Strong magnetic, the adsorption is firm and will not slide..
  • Size 320*320mm, compatible with MINGDA 3D printers D3 Pro, Rock 3, Rock 3 Pro.
  • 【Flexible Build Plate】The magnetic plate is flexible and removable, easy to remove models without tool..
Check Stock

COMGROW Creality Ender 3 Pro 3D Printer with Glass Plate Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm

  • Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding....
  • MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets....
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build....
  • Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from....
  • What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Upgraded Elevated Dog Bowls for Small Size Dogs and Cats - Adjustable Bamboo Raised Dog Bowl Stand with Highly Absorbent Spill Proof Mat and 2 Stainless Steel Pet Dog Puppy Food Water Bowls

  • ★【15 Degree Tilted Platform】:Our raised cat dog food bowl is perfect for eating and licking.
  • Raised stand lowers stress and pressure to your pet's joints and stomach. Digestive health is dramatically improved when dogs and cats no longer have to strain unnaturally to eat from ground level. Suitable for Papillon, Bichon Frise, Chihuahua ,Pug ,Corgi, Teddy, Shih Tzu, Pomeranian, Miniature Schnauzer, Maltese, Yorkshire Terrier and so on small size dog and cat.
  • ★【Improved Leg Plate Design & Adjustable Height】：With improved leg plate design and 4 adjustable height, perfect for cats and small dogs from different stages, adulthood or kitty puppy. REDUCES BLOATING AND NECK STRAIN IN DOGS AND CATS, avoid pets getting sick arthritis, neck or back problems.Now it can not only be placed at an angle of 15°, but also be placed horizontally..
  • ★【Easy to Install, Non-slip & Durable】：The elevated dog cat food and water bowls stand feeder easy to install without tools, 2 stopers, 1 front board and 2 slides to build a feeding station. Our upgrate stand is made of 3 layers bamboo wooden, stronger than other products. In addition, you will get a free specia....
Check Stock

Ceality Glass Bed for CR-10S Pro, CR-X, CR-10 V2, Ender-3 Max, 310x320x4mm, Official Version Build Surface

  • No Edge Curling - Official printer glass bed offered by Creality, its microporous coating on the upper surface can adsorb the model to glass bed surface, no worry of print edges curling..
  • Universal Application - This printer glass plate is well suited for most types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more..
  • Excellent Flatness - Improved borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed.
  • This glass bed could be fixed with middle sized clips and wash with alcohol or acetone at room temperature..
  • Compatibility - This printer parts is only applicable with Creality printers as following, CR-10S Pro, CR-10S Pro V2, CR-X, CR-X Pro, CR-10 V2, CR-10 V3 and Ender-3 Max, pls confirm if this glass print bed compatible with your printer..
Check Stock

3D Printing Tape 12' x 60 Yards Length

  • Perfect fit - Flawless 3D printing bed fit for Raise3D Pro2 Plus, Creality CR-10, Folger Tech FT-5 R2, and many more!.
  • Improves build plate adhesion - Maximize the adhesion of your print to the build plate by using this tape. This will minimize the chance of a print becoming loose and failing.
  • Eliminates gap lines - Eliminate all flaws and have a perfect print by eliminating gap lines from multiple strips of skinny tape.
  • Fast and easy to apply - The user friendly design of the tape allows for a quick application to the build plate.
  • Quick removal - Saves time because there is minimal adhesive left behind after removal of the tape.
Check Stock

ELEGOO Building Plate for Mars 2 and Mars 2 Pro LCD 3D Printer with Anti-Slip Hexagon Socket Screws and Sandblasted Surface Compatible with Mars 2 and Mars 2 Pro

  • ➤【MINGDA Original Plate】MINGDA original removable build plate platform for 3d printing. Size 235*235mm, compatible with common 3d printers....
  • ➤【Fast Heating】Use advanced tech, which has good thermal conductivity, it will heat up to 90℃ in 5 minutes. The first layer is easier to stick....
  • ➤【Super Suction】The print bed itself has no adhesive or paper backing. But strong magnetic, the adsorption is firm and will not slide..
  • ➤【Flexible Build Plate】The magnetic plate is flexible and removable, easy to remove models without tool..
  • ➤【Customizable】The flexible 3d printer plate surface can easily be cut to any demensions making it perfect for all build sizes and all FDM....
Check Stock

SUNLU 3D Printer S8 Plus FDM 3D Printer with Big Build Volume 310x310x400mm 3D Printing Size Resume Printing Function Fast Assembly DIY 3D Printers Comes with a Roll of PLA Filament

  • ①【Large Build Volume】SUNLU new FDM 3D printer S8 Plus, 310x310x400mm large printing size printer, do not need to print items in parts, save time....
  • ②【Quick Installation】95% pre-assembled, the printer can be used in a few simple steps after receiving. Disassembly is as simple as assembly,....
  • ③【Double-sided Movable Plate】The SUNLU S8 printer is equipped with a double-sided use glass bed/plate, one side has smooth glass surface, the....
  • ④【Resume Printing Function】Users can pause printing at any time, and resume printing after adjusting the filament. Don't need to be afraid of....
  • ⑤【Upgrade Parts】 Compared with the S8 version(SUNLU S8 3D Printer), S8 PLUS 3D Printer has been improved the Extruder Spring, Swing-Arm,....
Check Stock

HICTOP Ender 3 v2 Upgrades Flexible Build Plate PEI Steel Sheet 235x235mm Works for Ender 3/Ender 3 Pro/Ender 5 3D Printers

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lasting，The service life of our pei is 10 times longer than other Glass Bed.
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.It can be cleaned easily with water or alcohol.
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time.
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, without using any glue or other tools to help the model to stick onto the sheet.
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock