Top Imperial Thread Reviews

HOAOH 52 Pcs Stainless Steel Thread Gauges Whitworth Imperial 55 Degree, Metric 60 Degree, US 60 Degree Thread Gauge for Screws Measuring Tool

  • √ Size: Metric (mm) - 60° and Whitworth Imperial - 55°..
  • √ Metric Size: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • √ Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • √ Typically used to check the thread size is correct, and checking tool angle while cutting threads in metal turning lathes..
  • PRECISION MEASUREMENT - 52pcs Thread Gauge, The reading precision is more highly to helping you more accurately measured the size and gap distances..
Check Stock

SPEEDWOX Thread Pitch Gauge Set Thread Measuring Gauge Set 58Pcs Metric & America SAE & Inch 52Pcs Metric & Inch 51Pcs America SAE Screw Pitch Gage Center Gauge Stainless Steel Pitch Gauge

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

FullerKreg M8-1.25 DIN 1587 A2 Stainless Steel Acorn Nut 20pcs

  • √ A2 Stainless Steel, also known as 18-8 or 304 Stainless Steel. Details..
Check Stock

binifiMux 100pcs 6-32 304 Stainless Steel Nylon Inserted Lock Nut, 18-8 Nylock

  • - Used for: matching screws & matching bolts..
  • - Thread Pitch: 32 teeth per Inch (Coarse).
Check Stock

50Pcs Nut Inserts Wire Thread Insert Sleeve Bushing Screw Protective Coil Screw Repair Nut Kit Thread Locking Inserts M10 x 1.5(2D)

  • The wire threaded sleeve is female thread fastener with certain elasticity, which can enhance the connection strength of the thread..
  • It is convenient and quick to use wire thread inserts to convert metric one to one inch threaded holes. The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • Fit the wire screw set in the screw hole of the workpiece such as aluminum alloy to form a high-strength, wear-resistant, high-precision standard internal thread. 304 stainless steel has good corrosion resistance and is not easy to break when repairing thread holes..
  • The screw sleeve can be used to convert between metric and imperial thread holes, which is convenient and fast..
  • When there is a thread processing error or a damaged internal threaded hole is repaired, the threaded hole can be repaired economically and effectively by using the wire thread insert as a repairing method. The repair nut is mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
Check Stock

Shoulder Screw, 1/2 x 1-1/4, PK5

  • Price For: Each Drive Type: Hex Socket Meets/Exceeds: ASME B18.3 Finish: Plain Item: Shoulder Screw Type: Imperial Head Style: Knurled System of Measurement: Inch Class: 3A Drive Size: 1/4" Thread Size: 3/8-16 Shoulder Length: 1-1/4" Material: Alloy Steel Screw Head Height: 1/2" Head Height: 0.302" to 0.312" Head Dia.: 0.729" to 0.750".
  • Shoulder Dia.: 1/2" Min. Tensile Strength (PSI): 140, 000 Rockwell Hardness: 32 to 43 HRC Thread Length: 5/8" Shear Strength (PSI): 84000 Country of Origin (subject to change): Multiple.
Check Stock

Slipstick CB681 2 Inch Floor Protector Rubber Caster Wheels (Set of 4) 5/16 Inch Stem or Top Plate Mounting Options - Black/Gray Green

  • 【IMPERIAL STEM SIZE】: Our caster wheels are standard 3/8" with 16 TPI,Coarse Thread (US), the stud diameter is 3/8"-16UNC and the stud length is 0.79"(20mm), if your chair socket is METRIC M10, this caster is not suitable, please check before buy..
  • 【SINGLE LOCKABLE CASTERS】: The package includes 3 Standard caster and 2 CASTERS constructed with brake pedal, it can brake the rotation of the caster only, but the stem is still moveable for direction..
  • 【HEAVY DUTY CASTER WHEEL】: Our chair casters are made from industrial-grade steel, precision ball bearings, and durable polyurethane chair casters, can support up to 650 lbs for 5 pack 3 INCH casters, can be widely used for most chairs and other furniture with IMPERIAL STEM 3/8" only..
  • 【QUIET & SMOOTH ROLLER】: Made of high-tech elastic polyurethane, with double bearings are quick rolling and the surface is sleek,wouldn't get stuck by crumbs,hair, wouldn’t damage on floors..
  • 【SATISFACTION GUARANTEE】:The package comes with set of 5 caster wheel(2 with brake, other 3 without) and few 3/8"-16 thread Screw Inserts. Each caster will be backed by Hirate with lifetime warranty of replacement free..
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • ... Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 Aluminum with a Beautiful Hard Anodized Finish and Backed by 5 Year SST Warranty, We Stand Behind the Quality and Accuracy of ou....
Check Stock

ChgImposs Imper Screw Thread Pitch Gauge, 55 Degree Cutting Gauge Tool with Blades Range 4-62G

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • It was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

WEN ME210G Metric and Imperial Metal Thread Pitch Multi-Gauge with Carrying Case Two Pack Black

  • Measure the gauges of your nuts, bolts, screws, nails, PVC, copper, and more.
  • Includes one metric thread gauge in millimeters and one imperial thread gauge in inches.
  • Metal construction with laser-etched scales provides maximum accuracy and durability.
  • Both gauges feature removable taper guides for measuring taper depths.
  • Onboard protractor and ruler help take quick measurements as needed.
Check Stock

Flammi 10pcs Metric M8 Barrel Nuts Cross Dowels Slotted Nuts for Furniture Beds Crib Chairs

  • PLEASE NOTE These M8 barrel nut does Not work with Imperial 5/16-18 bolts.
  • Widely used in the assembly of most beds, cots and flat pack furniture.
  • Please carefully read the size details before place an order to make sure this size is what you want.
Check Stock

Flammi 10pcs Metric M6 Barrel Nuts Cross Dowels Slotted Nuts for Most Furniture Beds Crib Chairs

  • PLEASE NOTE these M6 barrel nut does NOT work with Imperial 1/4-20 bolts.
  • Widely used in the assembly of most beds, cots and flat pack furniture.
  • Please carefully read the size details before place an order to make sure this size is what you want.
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock