Top Impeller Nozzles Reviews

Simple Deluxe 1-Pack 80 GPH Submersible Water Pump with 6' Cord and 2 Threaded Nozzles for Fountains, Ponds, Aquariums and Hydroponics, Black

  • Pre-filter included: Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump max flow rate: 80gph, max lift height 2.6ft.
  • Durable quality: Our polished aluminum oxide ceramic impeller shaft insures long pump life, it is non-corrodible. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts.
  • Safe & easy: Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our electric cord is waterproof, 18# gauge copper wire, molded plug with ground.
  • 2 size threaded nozzles (0.31inch, 0.51in): Threaded fittings make it more stable. 4 suction cup at bottom and 6' cord, so you can stick it on the right side of the aquarium, either vertically or horizontally.
  • Versatile: Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems.
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
  • Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock

SKCORUK High-Powered Electric Air Pump with Five Nozzles for Rapid Inflation Perfect for Air Cushions Swimming Pools Water Beds Inflatable Boats Swimming Rings Swimming Pool Toys Rafts 300W

  • Multiple Nozzles to Choose from - including 5 nozzles for a wide range of applications.Everything involved in inflatable objects, it can almost....
  • Wide Range of Use - SKCORUK portable air pump is suitable for air cushion, inflatable bed, swimming pool, raft, sofa, bathtub, waterbed, boat,....
  • Amazing Charging Speed - as a powerful high pressure electric air pump, it is reliable to inflate and deflate in minutes.Without a doubt, it is the....
  • Fast and Safe Design - The electric air pump USES special built-in ball bearing and high quality metal impeller, so that the air pump has better....
Check Stock

BUYMAX Portable Electric Air Pump for Inflatables, Tiny Air Pump with USB Cable, Mini Inflator/Deflator Pump for Air Mattress, Pool Float, Air Bed -（No Battery）

  • SUPER HIGH-QUALITY PERFORMANCE: Our portable electric air pump uses a unique high pressure design for a faster inflatable experience, at 1.2PSI (8300 Pa), Fill queen-size and king-size air mattresses in 2-3 minutes..
  • INTERLOCKING NOZZLES: The 5 sizes of nozzles can fit most inflatables. The air pump's nozzles stay lock-secured on the electric air pump during use. Works well with air mattresses, airbeds, pools, rafts, sofas, bathtub, water beds, boat, pool toys, swimming rings etc..
  • UNIQUE SOUND INSULATION DESIGN: This air pump's unique sound insulation board will bring your quite life a double protection. This special design will greatly reduce the spread of its noise. While getting rid of the loud sound, this splendid material of our pump will not increase the weight of it, which let this electric pump still compact and practical..
  • FASTER AND SAFETY DESIGN: The electric air pump use a particular build-in ball bearing and high-quality metal impeller, which bring the mattress pump a better balance effect of vibration and smoothly engine running..
  • WHAT YOU GET: The inflatable air pump includes 45 days money back, 18 months warranty and 24/7 friendly customer service..
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

RTYEW Handmade Bamboo Fountain and Water Pump, Garden Decoration Craft Fountain Relaxing Gardening 40cm

  • MOTOR SIZE: Motor sizes ranging from 1/2 HP - 5 HP (Fountain Spray from 6' up to 32' High).
  • VALUE: Comes assembled, Includes 3 LED Lights, 8 Spray Pattern Nozzles, and a 5 Year Warranty.
  • QUALITY: Single and Dual Stage Impeller Pump, Stainless Steel Components, 14 Gauge Aluminim Clog Prevention.
  • HIGH EFFICIENCY: Triple-Life, Non Corrosive, and High Efficiency Motor.
  • ELECTRICAL: 100 FT of Power Cord included, Power Control Center with Timer included..
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

Honda WX10 Lightweight General Purpose Pump, 1'

  • 4-STROKE ENGINE - The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions..
  • HIGH PRESSURE - Ideal for sprinklers or nozzles, the WH20 comes with a maximum pressure of 64 psi. It is designed for a variety of applications requiring high pressure..
  • CAST IRON VOLUTE AND IMPELLER - The rigid-mount cast iron volute reduces case wear, increasing the life of the pump..
  • SUPERIOR DURABILITY AND PERFORMANCE - The WH20 bolsters a heavy duty frame to protect the pump while offering a convenient tie down location for transport..
  • 3 YEAR RESIDENTIAL/COMMERCIAL WARRANTY - You can rest easy, knowing your pump is covered from top to bottom for 3 full years..
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Poafamx 550GPH Submersible Pump 30W Ultra Quiet Aquarium Water Pump with 7.2ft High Lift Fountain Pump 3 Nozzles for Pond Hydroponics Statuary Fish Tanks

  • ...LIFT] Submersible water pump with adjustable knob to control the water flow, getting the flow rate you want freely, Max Flow Rate: 550 GPH (2000L/H).
  • [EASY TO DETACH AND CLEAN] This small water pump with compact size, both front and back covers, the impeller can be removed separately without tools, which is extremely convenient for you to clean the pump to avoid blocking and ensures smooth and stable water circulation.
  • [INSTALL AT ANYWHERe STABLY] 6ft long power cord for easy and deep installation. And this aquarium water pump is equipped with 4 powerful suction cups which can stably adsorb the pump on the surface of vertical or horizontal place, especially on glass surface. After sticking, it can also be rotated to the desired angle and place.
  • [3 NOZZLES MEET DIFFERENCT NEEDS] Fountain water pump includes 3 nozzles for option: 0.51"/0.62"/0.75", providing a different water flow for various needs. Threaded fittings make the connect more stable and water circulation more smooth.
  • [WIDE APPLICATIONS] Poafamx water pump is specially designed ....
Check Stock

Honda Power Equipment WH20 High Pressure 2" Pump Water Pump with GX Series Commercial Grade Engine and 119 Gal./Min Capacity

  • 4-STROKE ENGINE - The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions..
  • HIGH PRESSURE - Ideal for sprinklers or nozzles, the WH20 comes with a maximum pressure of 64 psi. It is designed for a variety of applications requiring high pressure..
  • CAST IRON VOLUTE AND IMPELLER - The rigid-mount cast iron volute reduces case wear, increasing the life of the pump..
  • SUPERIOR DURABILITY AND PERFORMANCE - The WH20 bolsters a heavy duty frame to protect the pump while offering a convenient tie down location for transport..
  • 3 YEAR RESIDENTIAL/COMMERCIAL WARRANTY - You can rest easy, knowing your pump is covered from top to bottom for 3 full years..
Check Stock

FREESEA Aquarium Submersible Fountain Pump: 550GPH 30W Adjustable Quiet Water Pumps with 7.2ft High Lift for Small Pond | Waterfall | Outdoor | Hydroponic | Statuary

  • ...ded fittings make it more stable. 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
  • [ EASY TO USE ] Aquarium pump can be manually disassembled without any tools, making it easier for you to clean the pump inlet port and impeller. And the 6ft long power cord offers convenient installation, just plug it in for quick water draining. Suitable for environments where the water temperature does not exceed 95°F (35°C).
  • [ MULTI-OCCASIONS ] Suitable for enviroments where the water temperature does not exceed 95°F (35°C). The high-performance energy-saving pump can circulate your aquarium and drain the water. It is a good choice for using in saltwater aquariums, ponds, turtle tank, fountains, waterfalls, hydroponic systems, and water features.
  • [ WARRANTY ] Any questions about the pump you received, please feel free to contact us at any time. We will provide 12-month warranty and 24-hour professional after-sales service.
Check Stock

Pond Boss DFTN12003L Floating Fountain With Lights, 50 Foot Power Cord, 1/4 hp

  • IMPRESSIVE WATER DISPLAY — all-inclusive floating fountain system designed to aerate and decorate large bodies of water. Easy to install, this fountain can be from the box and into the pond quickly..
  • POWERFUL & COMPACT — ¼ HP (horsepower) fountain with low-profile float design that remains balanced for easy upright positioning in water..
  • CONNECTS TO STANDARD GCFI OUTLET – this fountain uses 115-120 volts. Simply plug in the 50 ft. power cord for fast set-up..
  • HIGH PERFORMANCE – 2300 GPH pump utilizes quality parts and flex impeller and ceramic shaft & bearings for maximum efficiency, reliability and durability. Unique backflush technology ensures the pump won’t lock up and stays cool..
  • BEAUTIFUL WATER EFFECTS – includes three nozzle heads for a variety of spray patterns that not only dazzle, but also add oxygen to the water. Choices included a single-tier, three-tier, and trumpet nozzles. Three low-voltage lights are included to illuminate the fountain spray..
Check Stock