Top Ignition Wires Reviews

CDI Box 6 pin Ignition Coil Spark plug Relay Voltage Regulator for GY6 150cc Engine Scooter Moped Part for Tomberlin Crossfire 150R Spiderbox American Sportworks 150 GTS 150cc Go karts

  • [Apply To] 150cc cdi racing performance kit for Tomberlin Crossfire 150R American Sportworks 150 GTS 150cc Go karts GY6 150cc Engine Scooter Moped Parts, compatible with 4 stroke GY6 50-150cc 125cc engine like ATV taotao kymco Scooter Moped.
  • [Product Feature] 100% New High quality gy6 ignition coil set match up exactly with original equipment in perfect fitness, just replace and ride again, easy to install. The 150cc ignition coil can improve combustion efficiency, strengthen electrical performance. This gy6 ignition kit has higher quality components than others such as thicker copper wires - The gy6 ignition wires are made of all-copper, ensuring high-performance start-up.
  • [Quality Warranty] 1pcs Ignition Coil + 1pcs Cdi + 1pcs Spark Plug + 1pcs Voltage Regulator + 1pcs Solenoid Relay - High quality 150cc ignition kit with competitive price, fast delivery and good service.
  • [Note] The gy6 ignition repair kit is not sponsored or endorsed by, or affiliated with the brands it fit, including TaoTao, Buyang, Roketa, Coolsport, NST, BMX, Kazuma, Sunl, AIM-EX, Baja, Panterra, Kymco, Carroll Stream Eagle.
  • This 150cc ignition kit for Tomberlin Crossfire 150R Spiderbox 150cc Go karts may also know as gy6 ignition coil, 150cc cdi box, 6 pin cdi, cdi box for 150cc, ....
Check Stock

JDMSPEED New HEI Distributor with Spark Plug Wires Ignition Combo Kit Replacement for Chevy SBC 350 BBC 454

  • Include: One Distributor and one set plug wires.
  • 10.5mm High Performance Racing Spark Plug Wires SBC BBC Straight Boots.
  • Electronic Ignition HEI Plug Wires, 90 Degree HEI Style Boots on Distributor with Straight Spark Plug Boots.
  • Replacement For GM application utilizing the 4-pin ignition module.
  • HEI Complete Distributor 283, 305, 307, 327, 350, and 400 small blocks, and 396, 427, and 454 big blocks. Red cap.
Check Stock

LiftCharger 3pcs Piezo Ignition Wires Replace Atwood 57553 for Atwood Wedgewood 3 Burners 17-22 in. Wide RV Stoves

  • 3pcs high quality made in USA Piezo ignition wires for Atwood/Wedgewood RV range stoves..
  • To replace original 57553/57554 Piezo Ignition wires..
  • 22 inch long high quality insulation ignition wire with fiberglass shield for 17-22" wide stove (not for 23" wide stove)..
  • Fitting terminals - Mini round contact for igniter.
  • Mini quick-connect female spade (tool tuned up in June 2021 to ensure fit) on the other end for stove head..
  • 2 year manufacturer warranty against defects.
Check Stock

Complete Electrics Stator Coil CDI Quad Wiring Harness Solenoid Relay Spark Plug for 4 Wheelers Stroke ATV 50cc 70cc 90cc 110cc 125cc Pit Quad Dirt Buggy Bike Go Kart Parts by OTOHANS AUTOMOTIVE

  • ...90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
  • This is a complete electric start engine wiring harness loom,include 1x ATV Wire harness,1x CDI(5Pin AC),1x Solenoid Relay,1xRectifier (Voltage Regulator) ,1x Ignition Switch (2 keys, waterproof),1x Upgraded Multi-functional ATV Switch,1x Stator (Magneto Generator),1x Ignition Coil with lead, 1x Spark plug..
  • Magnetoelectric coil wiring: red and black wires are ignition wires / blue and white wires are trigger wires / double yellow wires are charging wires connected to voltage stabilizers / green wires are grounding wires. DO NOT FIT: GY6 motorbikes and other 200cc - 250cc Zongshen Lifan ATV / QUAD with different stator or CDI..
  • Note: Please check the pictures carefully before buying, especially the pictures of Magneto Stator. Please check the wiring diagram first before installation, and please consult or hire a mechanic to install this wiring harness if you are not sure about the wirings. False assembly may cause fire on the harness, though this occasion happens rarely.If you have any questions, you can contact us. We will give you a satisfactory answer..
Check Stock

High Performance 8Pcs D585 UF262 Ignition Coils Pack Round Type + 8Pcs 8mm Spark Plug Wire Set Part Number 748UU 12622553 12656210-15% More Energy

  • To avoid fitment issue: DO NOT only check the vehicle type, because the same vehicle type may use different shapes of coils, ROUND or SQUARE. To avoid fitment issue, you also need to look in your engine compartment to double check the coil shape. These ignition coils are ROUND!.
  • Round Ignition Coils Fitment: Perfect for Chevrollet GMC Buick Isuzu Cadillac 4.8L 5.3L 6.0L 8.1L V8.
  • Please double check for the fitment details in the descriptions and part number, and make sure your original coils is round type before purchasing..
  • Complete Ignition Coils Pack: 8 Pieces D585 ignition coils + 1 Set Spark Plug Wires (8pcs) + 1 Set Wire Separator Loom.
  • Benefits: Improves throttle response & gas mileage, reduces misfire, ensure for long lasting use and high performance after long journey on the road.
  • 12 months warranty for free replacement or refund.
Check Stock

NEW Scooter Ignition Switch Key Set for TaoTao 49cc 50 cc 150cc gy6 Peace Roketa Jonway NST Tank Gy6

  • Package Include: 1 x Ignition switch (with 5 wires), 2 x Keys , 1 x Seat lock , 1 x Panel lock, 1 x Gas cap, 1 x Metal bracket.
  • Package indcluding: key ignition with 5 wires,set of 2 keys,gas tank cap lock,seat lock and mounting clip,seat latch and cable assembly.
  • Features: 1. Ignition switch key set, 3 position switch: on/off/lock,High performance, durable in use.
Check Stock

KIPA 6-Wires Key Ignition Switch for Kazuma Meerkat 50CC Falcon 90CC 110CC 125cc RedCat ATV Quad

  • Key ignition switch For Kazuma 50cc 70cc 90cc 110cc 125cc ATV Quad.
  • Key ignition switch For Kazuma Meerkat 50cc ATV.
  • Key ignition switch For Kazuma Falcon 90cc 110cc 250cc ATV.
  • Key ignition switch Redcat 50CC 90CC 110CC ATV.
Check Stock

Ignition Key Switch Replacement for Eton Viper Sierra Rascal 50cc 70cc 90cc 150cc ATV #650720

  • Aftermarket Key Ignition Switch for E-Ton 40cc 50cc 70cc 90cc 150cc ATV Quad.
  • It comes with the ignition assembly and TWO keys with dust cap.
  • For some models you will need to rearrange the connection wires based on your harness wire colors. Match the wires color before installing..
Check Stock

Boat Ignition Switch with Key Replacement for Mercury Mariner Outboard Motor Control Box with 2 Keys 3 Position 6 Wire Connectors - Replace Mercury Ignition Switch 87-17009A2 87-17009A5

  • REPLACeMENT IGNITION STARTER SWITCHES - An ignition switch, starter switch or start switch is a switch in the control system of a motor vehicle that activates the main electrical systems for the vehicle. If you have to wiggle the key hard or the boat won't start when the key is turned, it means you need to replace a new engine starter ignition key switch for your boat..
  • PROFESSIONAL DESIGN - 3 Position OFF - RUN- STAR and 6 wires for push to choke. This Boat Engine Ignition Switch made of high performance polyester and high quality brass, which provides safety, durability and excellent electrical conductivity. You can buy it with great confidence..
  • COMPATIBILITY - This Ignition Key Switch replacement for most Mercury Outboard Control Box, replace OE number for reference: Mercury 87-17009A2 87-17009A5, Sierra MP41070-2 MP41070-1 MP41070. Please kindly check the fitment to ensure this will fit your model before ordering..
  • EASY INSTALLATION - Colors on switch wires match factory color codes. Direct replacement, a simple plug & play with no wire splicing. Meets or exceeds OEM standards, 100% tested before shipping....
Check Stock

87-88107A5 Boat Ignition Switch with Key Boat Push to Choke 6 Wire Base Ignition Key Switch for Mercury with 2 Keys 6 Wire Connectors | for Mercury Push Choke Ignition

  • [100% Brand New Boat Ignition Switch with Key] High quality boat ignition switch with key 6 wire is made of marine-grade glass-filled polyester construction, durable in use. Boat Ignition Key is non-conductive housing eliminates potential shorts. Boat key switch with choke has maximum corrosion protection - eliminates oxidation. Ignition Switch Boat Push to Choke 6 Wire Base Mercury - inner seal between cylinder lock and contact plate.
  • [Fitment] 6 wire boat ignition fits for Mercury applications w/Potted Wires replacing OE#'s Listed - 6 wire marine ignition switch replaces for Mercury part number: 87-88107 , 87-88107A5, 7-1155. Boat Ignition Switch with Key 6 Wire fits for most Mercury Outboard Motors 1994 and Later using.
  • [Specification] Push choke ignition switch has 3 Position: Off - Ignition - Start, includes 2 keys, fits for Side Mount Controls or Panels up to 5/8". Boat Ignition Switch with Choke rated Up to 30 amps 12V. Ignition Key Switch with Push to Choke function, use with Magneto Ignition.
  • [Warranty] 1x Ignition Key Switch, 2x Key - we offer 24 month warranty. If you have any other questions ....
Check Stock

87-17009A5 Boat Ignition Switch Replacement for Mercury Mariner Outboard Motor Control Box Ignition Key Switch with 2 Keys 3 Position 6 Wire Connectors for Mercury Push Choke Ignition

  • ➼Replace Ignition Key Switch – The boat ignition switch need to be replaced when you have to turn the key hard and the boat won't launch. Our boat Ignition switch with choke has great corrosion protection to eliminate oxidation. And the non-conductive housing of ignition key can prevent potential short circuit to extended service life..
  • ➼Replaces Part Number –This 6 wire boat ignition key switch fits for most Mercury Outboard Motor Control Box, replaces for Mercury OE part number: 87-17009A5, mp51090 mp41070-2. Please check the ignition switch part number carefully before you purchase..
  • ➼Feature - This Boat Engine Ignition Switch has 2keys, 6 wires for push to choke, and 3 position: Off- Ignition -Start. And it is made of high quality polyester and brass, the boat ignition switch with key has an excellent Corrosion resistance, Abrasion resistance and Conductivity.
  • ➼Easy Installation – The color of the Ignition switch wire matches factory color code, so it is easy to install push choke ignition switch, just match the wire color to install. Note: This ignition key switch is not a genuine Mercury part, it....
Check Stock

87-17009A2 Boat Ignition Switch Replacement for Mercury Mariner Outboard Motor Control Box Ignition Key Switch with 2 Keys 3 Position 6 Wire Connectors for Mercury Push Choke Ignition

  • ➼Replace Ignition Key Switch – The boat ignition switch need to be replaced when you have to turn the key hard and the boat won't launch. Our boat Ignition switch with choke has great corrosion protection to eliminate oxidation. And the non-conductive housing of ignition key can prevent potential short circuit to extended service life..
  • ➼Replaces Part Number –This 6 wire boat ignition key switch fits for most Mercury Outboard Motor Control Box, replaces for Mercury OE part number: 87-17009A2 17009A2, Sierra MP41070 MP41070-1 MP41070-2. Please check the ignition switch part number carefully before you purchase..
  • ➼Feature - This Boat Engine Ignition Switch has 2keys, 6 wires for push to choke, and 3 position: Off- Ignition -Start. And it is made of high quality polyester and brass, the boat ignition switch with key has an excellent Corrosion resistance, Abrasion resistance and Conductivity.
  • ➼Easy Installation – The color of the Ignition switch wire matches factory color code, so it is easy to install push choke ignition switch, just match the wire color to install. Note: This ignition key switch is not a g....
Check Stock

Ignition Distributor Cap and Rotor Kit, Replace D328A 10452458 D465 Compatible with Chevy GMC 4.3 Vortec - 1996-2005 Astro, 1995-2005 Blazer, 1995-2004 S10, 1999-2006 Silverado, 1995-2001 Jimmy, More

  • REPLACeMENT IGNITION DISTRIBUTOR CAP AND ROTOR KIT : The distributor cap and rotor kit is located under the car's hood. Open the hood and look for a black component near the centre of the engine. The distributor caps are stress-relieved immediately after molding to ensure dimensional stability. Symptoms of a bad or failing distributor cap: The CEL is illuminated, the vehicle does not start, the engine idles rough. If you find the distributor cap worn out or cracked, replace it immediately..
  • COMPATIBLE WITH CHEVY, OLDSMOBILE VEHICLES : 4.3L V6 Vortec engine - 1996-2005 Astro | 1995-2005 Blazer | 1996-1998 C1500 | 1996-2007 Express 1500 | 1996-2005 Express 2500 | 1996-1998 K1500 | 1996-1999 P30 | 1995-2004 S10 | 1999-2006 Silverado 1500 | 2007 Silverado 1500 Classic | 1996-2001 Bravada ignition distributor cap and rotor kit..
  • REPLACES PART # : D328A, 10452458, D465, 10452457 ignition distributor cap and rotor kit. It can compatible with GMC 4.3L V6 Vortec : 1996-1998 C1500 | 1995-2001 Jimmy | 1996-1998 K1500 | 1996-1999 P3500 | 1996-2005 Safari | 1996-2007 Savana 1500 | 1996-2005 Savana 2500 | 1997-2002 Savana 3500 | 1999-2006 Sierra 1500 | 2007 Sierra 1500 Classic | 1995-2004 Sonoma. Please check the detailed description to confirm the compatibilit....
Check Stock