Top Idler Bearings Reviews

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

[10-Pack] GT2 Idler Pulley 16 Teeth 3mm Bore, Aluminum 16T Idler Pulley for 2GT Timing Belt 6mm Width 3D Printer

  • 【Best GT2 Idler Pulley Upgrades】HKWANTAT GT2 Idler Pulley 16 teeth 3mm bore. Simple structure, high quality bearings, which is fine workmanship, smooth transmission, precise teeth pitch, high transmission efficiency and energy-saving effect..
  • 【Excellent Performance】HKWANTAT GT2 Idler Pulley 16 teeth 3mm bore made of high quality aluminum alloy, surface oxidation treatment, durable. So many DIY enthusiasts are full of praise for it, and it will also be your best choice..
  • 【Parameter】Type: With Teeth, Teeth: 16, Bore: 3mm, Width: 13mm, Height: 9mm, for 2GT 6mm Width Timing belt, Color: Silver..
  • 【Widely Used in】GT2 Idler Pulley 16 teeth 3mm bore can use for 3d printer and any DIY milling machine, gear shaper, drilling machine, hobbing machine or other machinery transmission occasions etc..
  • 【Packing List & Warranty】10 x GT2 Idler Pulley 16 Teeth 3mm Bore. 1Year Warranty. Each product of HKWANTAT had passed strict QC, If you have any problems when you use the product, just contact us, and we will help you solve it at any time..
Check Stock

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug

  • ...s.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the image..
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Detroit Axle - 8 Lugs Front Wheel Hub Bearing + Upper Control Arm w/Ball Joint Suspension Kit Replacement for Silverado Sierra 2500 3500

  • Replacement for 4WD & 3-Groove Pitman Arm Models.
  • Idler Arm Does NOT fit models with Rack & Pinion Steering.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Wheel Hubs & Bearings + 2x Front Upper Control Arms w/ Ball Joints + 2x Front Lower Ball Joints + 2x Front Sway Bars + 4x Outer & Inner Tie Rods + 1x Idler Arm + 1x Pitman Arm + 1x Idler Arm Bracket Assembly.
  • Hub Specifications: Position: Front | Lugs: 8 Bolt | ABS Type: Sensor Wire | Flange Type: 4-Bolt Square.
Check Stock

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • ...s.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the image..
Check Stock

Loctite 2301375 680 High Strength Bearing Mount For Relaxed Fits, O.E.M. Specified, 36-mil Bottle

  • QUALITY. High strength, medium viscosity anaerobic adhesive for slip fit assemblies..
  • APPLICATIONS. Replaces set screws, clamp rings, snap rings, wheel bearings, idler shaft, fit bearings..
  • FORMULATED. Selection of viscosity, gap-filling ability, flexibility and strength characteristics..
  • RESULTS. Seal joints to stop leakage and prevent fretting and corrosion..
  • EASY TO USE. Adheres in 10 minutes at room temperature..
Check Stock

Valvoline Multi-Vehicle Moly-Fortified Gray Grease 14.1 OZ Cartridge

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
  • DRILLER RED GREASE: This NLGI #2 Red Grease protects heavy-duty drilling, industrial, mining, and construction equipment from wear and corrosion..
  • FORMULA: This heavy-duty red grease has a Lithium Complex base formula for superior protection and lubrication..
  • APPLICATIONS: Driller Red Grease is ideal for drilling and mining applications, backing plates, ball and chassis points, construction ball & roller bearings, idler bearings, industrial applications, U-joints, water pumps, wheel bearings, and more..
  • SPECIFICATIONS: Driller Red Grease is available in a 14 wt oz. cartridge..
Check Stock

Belt Grinder 2x72 Wheel Set Knife Grinder 4 Drive 5/8 bore 4 Track 2 Idler 4,5/8-4 - 2

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock

Belt Grinder 2x72 Wheel Set Knife Grinder 5' Drive 5/8' bore 4' Track 2' Idler (5' 5/8-4' - 2')

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock

Belt Grinder 2x72 Wheel Set for Knife Grinder 5' Drive 5/8' Bore 3' Track 2' Idler (5' 5/8-3' - 2')

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock