Top Idc Insertion Tool Reviews

Cable Matters UL Listed 50-Pack RJ45 Keystone Jack in Blue and Keystone Punch-Down Stand

• Cat 6 RJ45 Heavy duty keystone jacks fit patch panels, wall plates, or surface mount boxes with standard keystone blank openings.
• Accepts 23 and 24 AWG unShielded twisted pair (UTP) cable.
• 10 Gigabit Ethernet cat 6 performance to Future proof your network.
• Meets or exceeds Category 6 performance in compliance with the ANSI/TIA/EIA 568-C.2 standard.
• UL listed keystone jack (E486099) with T568A and T568B color-coded labels.
• Category 6 rated performance up to Gigabit Ethernet speeds for a fast and reliable network.
• Supports T568A and T568B wiring with 110-style, color-coded termination blocks.
• Dual IDC terminals accept 110 or Krone impact tools and provide cable strain relief.
• Cost-effective 50-pack of Category 6 KJ modules includes a keystone jack punch-down stand for easier and safer cable termination.
• Impact tool or tool-free 90 degree termination.
• Heavy duty construction includes an impact-resistant and fire-retardant housing with gold-plated RJ45 contacts, dual IDC covers, and a snap-in retaining clip for a secure connection.

Cable Matters 110 Punch Down Tool with 110 Blade

• Punch down tool cuts and terminates cable into a 110 patch panel or keystone jack.
• Removable blade of impact style tool with twist and lock sockets can be stored in the tool body for transport.
• Adjustable impact force settings (Lo/Hi) for cable termination into a jack, block, or patch panel with 110 IDC terminals.
• Keystone jack compatible with Cat 3, Cat 5, Cat 5e, Cat 6, and Cat 6A network or voice cable.
• Pair with a keystone jack punch down stand for a safe a secure installation.
• 110 block tool uses spring-action for fast, low-effort cable seating and termination with reversible cut/punch blade.

Jonard FT-6 Flaring and Insertion Tool, 4-1/4\ Length

• The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors.
• The insertion end makes "F" connector insertion fast and easy, even in cold weather.
• This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables.

Cable Matters Punch-Down Impact Tool with Krone Blade

• Terminates cable into patch panels and keystone jacks with Krone IDC terminations.
• Spring-loaded reversible blade with scissors cuts excess wire automatically for a clean connection.
• Pop-out hook and extractor tool for removing old wires or pushing down wires.
• Integrated wire-stripper blade seated in the body of the tool with protective guide.
• Compatible with Cat5 cable, Cat5E cable, Cat6 cable, and Cat6a cable.

CablesOnline, 6-inch Internal IDC 50-Pin SCSI Drive Extension Ribbon Cable, (FS-E06)

• IDC 50-Pin 2X25 SCSI Ribbon Cable Extension.
• Connectors: 1x IDC 50-Pin Male, 1x IDC 50-Pin Female, 2.54mm Pitch.

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

• 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
• Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
• The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
• Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
• Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
• Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
• Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
• Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
• It can help you drill easily and fast and save time and energy for you.
• The combination of blue and black color makes the dr....

Connectors Pro Pc Accessories 2-Pack DB Pin Tool, D-Sub Insertion/Extraction Tool

• Pin Insertion Tool On One End And The Extraction Tool On The Other.
• This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors.

Jonard Tools WK-7 IC Insertion Extraction 5 Piece Tool Kit

• DIP IC INSTALLATION: This tool kit is designed to facilitate the installation and extraction of DIP IC and PLCC chips on circuit boards.
• CMOS SAFE: All tools that engage conductive surfaces are CMOS safe and include grounding lugs where appropriate.
• INCLUDES: EX-1 DIP IC Extractor (8-24 pins), EX-2 DIP IC Extractor (24-40 Pins), EX-5 PLCC Extractor, ESD Safe, MOS-1416 Insertion Tool (14-16 Pins), and MOS-2428 Insertion Tool (24-28 Pins).

D-Sub Pin Insertion and Extraction Tool

• Tool to insert or extract D-Sub pins with ease.
• Red side for insertion and the white side for extraction.

Cable Leader D-Sub Pin Insertion & Extraction Tool

trueCABLE Impact Punch Down Tool With Blade for 110 IDC, Keystone Jacks and Patch Panels, trueIMPACT

• VERSATILE. This handy kinetic energy impact punch down tool comes with a 110 termination blade with termination-cut and termination-only reversible ends. High and low impact settings to allow for different conductor sizes. Great for terminating keystone jacks and patch panels..
• CONVENIENT. Includes an integrated swing-out hook tool for easy copper conductor removal from the IDC block if re-termination is necessary. It also includes an integrated swing-out screwdriver. 110 blade stores inside the tool using a captive cavity in the base..
• COMFORTABLE. Ergonomic grip is further enhanced by rubberized TPE offering all-day comfort..
• RELIABLE AND DURABLE. High end professional quality networking tool. Cuts conductors during termination more consistently than other brands. The internal mechanism is longer lasting and more consistent in operation than any other on the market. Shell is constructed of high impact ABS plastic..
• ✓ FIELD TESTED, CUSTOMER APPROVED. Add this tool to your bag today and make your terminations hassle free from here on out..

SinLoon DB25 to IDC 26 Pin Cable,Motherboard Slot Plate Parallel Panel DB-25 Female to 26 Pin IDC Socket Flat Cable

• Product Name: Full copper cable core DB25P female to IDC26P female baffle cable.
• IDC26 to DB25 (Parallel). Female to female connection. Perfect for the SmoothStepper, UC400 and other CNC boards.
• The DB25 connector also fits directly into the DB25 slot of most cases. Add 1 motherboard cable adapter DB-25 Female to 26 Pin port to your computer,Ensure smooth data flow from your parallel port. This adapter cable connects to the motherboard or I/O adapter via flat ribbon cabling. Compatible with most brands of motherboards and I/O cards. The 11-inch length exceeds the standard length of cables often provided with motherboards, and provides flexibility for your connection..
• Note:Do not insert the LPT1 pin on the main board. The red side line is the 1st line. The corresponding 1st pin on the main board usually has a red line.003cbr003e The printer port working mode (parallel port mode) in the motherboard BIOS, please set to Normal003cbr003e.
• Package Content: 1 x DB25 to IDC 26 IDC Socket Flat Cable ,Length Cable : 30cm.

CompuCablePlusUsa.com Best Pack of 3 Dsub Insertion/Extraction Crimp tool (Upgrade new version in 2021)

• Pack of 3 Tool for RS232 Crimp type Contact Pin Use..
• Item Comes with Red End for Pin Insertion and the White End for Extraction.
• This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors.
• Tool Length 3.9" ( 99+/-3mm), Copper Material ABS Resin, Weight 5 g..