Top Ict Billet Radiator Hose Barb Coupler Reviews

Foster 3 Series - 50pc Coupler & Plug Kit, 1/4\ Body, 1/4\ NPT - Industrial Interchange, I/M, MIL Spec

Made in the USA. 300psi Working Pressure.
Heavy-Duty build For the toughest jobs. Designed to be used Daily..
Interchanges with: Industrial, I/M, MIL Spec.
Brass Sleeve, Body & Hose Barb, Steel Valve & Spring. High-Quality Molded Seal..
Male Coupler with Sleeve Guard - 1/4" Body x 1/4" Hose Barb.

Check Stock

ICT Billet LS Mounting Base Plates Places ICT Billet Remote Coil Brackets on Stock Valve Covers LS1 LS3 LSX Designed & Manufactured in the USA 551115-01

Includes: 2 mounting plates and mounting hardware.
Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
Compatible with: all ICT Billet LS remote coil brackets.
Compatible with: all S10 trucks when ICT Billet S10 accessory brackets.
LS Mounting Base Plates (for Remote Coil Brackets on Engine Block) LS1 LS3 LSX.

Check Stock

Hromee Air Hose Fittings 1/4 Inch NPT Brass Quick Connect Coupler and Plug, 20 Pieces Air Compressor Accessory Kit with Blow Gun and Tire Gauge

QUICK-CONNTECT FITTINGS - There are various 1/4” NPT industrial connectors you need for air compressor in this kit: 2PCS MNPT Plugs, 2PCS FNPT Plugs, 1PC MNPT Coupler, 1PC FNPT Coupler. The quick connect design make you can change the connections with one hand quickly..
CLEAN-UP TOOLS - The clean-up kit includes a blow gun, a tapered tip and a rubber tip. The blow gun, made of zinc alloy, delivers powerful air flow especially for clearing up messy spots or drying jobs. The rubber tip can protect the delicate surfaces from damage..
INFLATING TOOLS - Dual foot tire chuck is used for inflating, deflating and measuring tire pressure accurately and easily. The pencil tire gauge measures 10-50 PSI to ensure tire properly inflated. 2 needles are to inflate pool toys, sports balls and air mattresses. The ball foot chuck has a built-in shut-off valve..
HOSE REPAIR KIT- One brass hose barb with 1/4 in. and 1/4” MNPT fitting to replace damaged hose ends. One brass double barb for splicing hoses to fix damage in the middle of the hose. Stainless-steel high tension hose clamps are easy to use and provide a tight and secure hold for 1/4 inch to 5/8 inch (0-16 mm) hoses..
DURABLE BRASS - This kit includes all accessories you will need to pair with your tools to get....

Check Stock

Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg

【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.

Check Stock

Robinair 31078 1/4 Premium Refrigerant Charging Hose - 72 Long Yellow Standard Fittings

72 inch long, 1/4 inch yellow hose features a 500 PSI working pressure and 2500 PSI burst pressure - ideal for standard refrigerants.
Rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability.
Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end for convenient access to the system.
Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening.
Hose ends feature a strong six-sided crimp that provides a secure, reliable connection between the hose and barb - even at maximum pressure.

Check Stock

Othmro Air Tool Pressure Washer High Flow Coupler Plug 5.5mm/0.22\ Hose ID Quick Connect Fitting Set 4PCS

The Air Hose coupler set is connect to 5.5mm/0.22" hose ID.
Features a Barb on the outer ends for easy connectivity to almost anything..
Air quick Connect Fitting Used anywhere high pressure connections are frequently assembled and disassembled.
Air Hose Set for quick exchange of spray nozzles.
These quick couplers connect to common air compressors equipment in the industry.

Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..

Check Stock

Koauto 6.30mm SAE1/4'6mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

▷ Fuel Line Hose Coupler Quick Release Connect Connector.
▷ Good quality material nylon compatible with fuel/gas and other common fluid types, it is durable, long life for use.
▷ Easy installation: The end of barb connects with fuel pipeline or hose, time saving and good efficiency.
▷ Connect the fuel line pull out simply for disconnect while pressing the lock button..

Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..

Check Stock

Robinair (30060) 1/4' Standard Hoses with Standard Fittings Set - 60', Set of 3

60 inch long, 1/4 inch yellow, blue, and red hoses feature a 500 PSI working pressure and 2500 PSI burst pressure – ideal for standard refrigerants.
Rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability.
Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end for convenient access to the system.
Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening.
Hose ends feature a strong six-sided crimp that provides a secure, reliable connection between the hose and barb – even at maximum pressure.

Check Stock

Joywayus 3/16'x3/8'x3/16' ID Hose Reducing Barb Tee 3 way Union Fitting Intersection/Split Brass Water/Fuel/Air

3/8 npt male thread to 1/2" 8AN hose barb push on tube adaptors straight pipe connector.
Made from lightweight 6061-t6 cnc machined billet aluminum alloy.
Black Anodized Finish for Long Last, Strength and Durability.
Can be used for most automotive needs, such as: Fuel, Oil, Coolant, Air, and more.
Hex head male npt to push-on hose fittings.

Check Stock

Dorman 902-5135 Engine Coolant Thermostat Housing Assembly Compatible with Select BMW Models

Direct bolt-in replacement to stock, cracked or discolored tanks Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations No cutting of factory hoses is required and accepts the factory clip-on hose Included is a Moroso Part No. 63324 racing radiator cap that operates in the same pressure range as the factory cap The Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks Easy to read slight level is included This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look..

Check Stock