Top Ice Auger Blades Reviews

VEVOR Ice Drill Auger, 8" Diameter Nylon Ice Auger, 39" Length Ice Auger Bit,Auger Drill with 11.8" Extension Rod,Auger Bit w/Drill Adapter,Top Plate & Blade Guard for Ice Fishing Ice Burrowing Red

... Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which are lightweight, durable, and rust-proof. Meanwhile, it has good tensile, impact resistance, and flexibility, saving your labor and time..
Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a hot knife through butter. In addition, the edges come with a blade guard, which can keep the blades from damage and extend the blades' service time..
Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the extension rod to shaft.
finally, fix it with a special bolt. Extension rod length: 11.8"/30 cm. The ice auger bit is equipped with an adapter and a top plate. The adapter allows you to connect the auger with various kinds of the drill. The top plate can prevent you from the hurt of splashing ice..
For Ice Fishing: This ice drill is very suitable for ice fishing enthusiasts due to its professional design and lightweight. It can easily punch the Φ8" holes on the h....

Check Stock

SORANGEUN 31.5”x6” Ice Auger,Heavy-Duty Ice Augers for Ice Fishing,Auger Drill Bit for Ice Post Hole Digger,Bule Ice Fishing Auger

【Sturdy Material】Our ice auger is made of heavy iron, which can effectively prevent the ice auger from breaking during drilling. The blade at the bottom is made of stainless steel, which will not rust even after multiple uses..
【Sharp Blades】There are 2 rotary blades and 1 central blade at the bottom of the ice drill, which are made of high-quality stainless steel to prevent rust while maintaining the characteristics of light weight and sharpness. At the same time, the three blades can be replaced at will. You can easily make many water ice holes..
【Suitable Size】Our ice fishing auger is carefully designed by the designer, with a length of 31.5 "and a width of 6".Too short size will damage your waist and back when punching, while too long size will be inconvenient to carry..
【Easy to Install】This ice auger is very simple in terms of blade installation and connection with the drill. The blade can be directly disassembled and installed with a screwdriver.
When connecting with the drill, pay attention to the hole size of the ice drill. The hole diameter of this ice drill is 0.75 inch..

Check Stock

Compatible Ice Maker Kit for General Electric WR30x0318 General Electric TBX18DIXJRWW General Electric DSS25KSRDSS General Electric GTS18JCPARWW Refrigerator

The GE Appliances WR17X11939 Ice Bucket Auger Assembly is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact....
Replacement GE Appliances Refrigerator Ice Bucket Auger Assembly attaches to the auger drive motor and spins to drive ice out of the ice bin while....
GE Appliances WR17X11939 Refrigerator Ice Bucket Auger Assembly is manufactureed with plastic blades around a metal core.
High quality GE Appliances OEM WR17X11939 Refrigerator Ice Bucket Auger Assembly is manufactured with premium materials for durability and exact fit,....
Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories.

Check Stock

Goture Ice Drill Auger, 7" Diameter Nylon Ice Auger, 41" Length Ice Auger Bit,Auger Drill with 19.6" Extension Rod,Auger Bit with Ice Spoon,Handbag for Ice Fishing

...Heavy Duty Nylon Material: 39" shaft with lightweight yet durable synthetic nylon flighting & iron stem brings the weight down. It keeps the unit lightweight while maintaining flexibility and impact resistance in cold temperatures.
Replaceable & Stability Blades: Upgraded dual flat steel blades offer smooth cutting and break-through, sharp, sturdy and Replaceable. Razor sharp steel blades along with center point blade promotes stability and smoother cutting..
Extension Rod & Adapter: How to extend the length of the ice auger? you can detach the adapter and top plate from the shaft, then attach the extension rod to shaft.
finally, fix it with a special bolt. Extension rod length: 19.6"/50 cm. with the adapter allows you to connect the auger with various kinds of the drill..
For Ice Fishing: This ice drill is very suitable for ice fishing enthusiasts due to its professional design and lightweight. It can easily punch the Φ8" holes on the hard and thick ice surface, bringing convenience and fun to you..

Check Stock

VEVOR Ice Drill Auger 6 Diameter Nylon Ice Auger 39 Length Ice Auger Bit,Auger Drill with 11.8 Extension Rod,Auger Bit w/ Drill Adapter,Top Plate & Blade Guard for Ice Fishing Ice Burrowing Red

High-Performance Drilling: The ice drill auger’s effective length is: 39 inches, rotating diameter: 6 inches, weight: 4.9 lbs/ 2.2 kg. It is....
Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which are lightweight, durable, and rust-proof. Meanwhile, it has good....
Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a hot knife through butter. In addition, the edges....
Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the....
For Ice Fishing: This ice drill is very suitable for ice fishing enthusiasts due to its professional design and lightweight. It can easily punch the....

Check Stock

Eskimo S33Q8 Sting Ray 33cc with 8 Quantum Ice Auger

33CC VIPER 2-CYCLE ENGINE: Cold-weather tested.
QUANTUM AUGER: Ideal for re-drilling holes with its unique centering ring.
PRECISION, STAINLESS STEEL BLADES: Blades last longer and hold their edge in dirty ice. Blade protector included to help further extend the life of....
STAINLESS CENTERING POINT: Keeps the auger stable on uneven ice, or when re-drilling old holes.
ALL-METAL TRANSMISSION: Offers optimum gearing.

Check Stock

K-Drill Idrl24 Orange Safety Cap(Blade Cover)

...astic disc with a stainless-steel adapter. *Patent No. US D907,071 S.
Diameter: 0.71"/1.80 cm, Wing Bolt Hole: 0.25”/6.64cm, Chuck: fits up to ½” drill bit. Auger Stopper Disc.
Diameter: 9”/22.86cm, fits up to 8” auger blades. Washer.
Diameter 5/8”. E-clip. *For Hand augers only. Does NOT fit K-Drill Augers*.
ASSEMBLY REQUIRED –The Auger Stopper includes 4 parts.
(1) stainless-steel adapter (1) steel washer (1) e-clip (1) stopper disc. Assembly instructions are included with packaging, making it easy to install within a few minutes. PLIERS WILL BE NEEDED for assembly..
INSTALL – Once disc is assembled remove handle off your "Hand Auger" and insert the Auger Stoppers 0.71" diameter adapter end into the auger shaft and secure pin. For best results.
attach drill without wearing gloves to ensure adapter is on nice and tight. The adapter is unique design prevents the disc from spinning! *Auger blade not included.

Check Stock

16" x 4" Upgraded Auger Drill Bit with Sharp Thickended Blades and Tungsten Steel Cemented Carbide - Ice Augers for Ice Fishing Intensive Blades for Planting for 3/8" Hex Drive Drill

【Sharp Thickended Blades】Compared to other similar products,we are the first to add two Blades on the Auger Drill Bit.These blades are made of 65 high strength manganese steel,which is very hard and sharp,so that the drilled hole can be kept very intact.With the help of Blades,you can not only improves the efficiency of drilling mud, but also can drill holes on ice with great ease..
【Tungsten Steel Cemented Carbide Twist Drill Bits】We use a solid twist drill as the drill bit, which can bring a greater impact on the soil. This twist drill is made of Tungsten Steel Cemented Carbide, which makes it very easy to drill holes in hard soil, gravel soil and ice..
【Specification】4 inch diameter x 16 inch length. Work with most 3/8" or larger chucked drill..
【For Ice Fishing】 The upgraded auger drill bit not only can work on hard soil and little rocky soil for all plants in the garden,but also can dig holes on ice. It is very suitable for ice fishing enthusiasts due to its professional design and lightweight..
【30 Day No Risk Guarantee】This product is equipped with a....

Check Stock

Nordic Legend E-Drill Nylon Ice Auger Combo and Universal Adapter with 14” Extension (8-in)

Combo includes Adapter, Nylon flighting Auger bit (Electric Drill not included).
Fit almost all brand 18v-20v drill, like DeWalt, Makita, Milwaukee, Ridgid, Ryobi and Husky, etc.
33" Shaft with Lightweight Yet Durable Synthetic Nylon Flighting & aluminum stem bring the weight down by one third of normal steel hand ice auger, or about half of the weight of Lithium Power Ice Auger in the market.
Razor Sharp Steel Blades Along with Center Point Blade Promotes Stability and Smoother Cutting.
Universal Adapter with 14” Extension, three Adjustable Height Settings Safety Cover and Strap Included.

Check Stock

StrikeMaster Lite-Flite Lazer Drill Unit 8"

AUGER DRILL ADAPTER: Convert hand auger into a power auger with this ice auger adapter for cordless drill.
Must-have ice fishing accessories to break ice into ice holes.
CONNECTIVITY: Ideal cordless drill ice auger attachment to perfectly fit majority augers including Eskimo, Expert Pro, Arctic, Spiralen, Easy Ice, Viking, Micro and StrikeMaster augers (Mora & Lazer).
NON-COMPATIBLE with all other diameters, bolted joints, or augers with the threaded connection.
POWER DRILL COMPATIBLE: Recommended to use with cordless power drills of 18V–3Ah 40/80 Nm.
DURABLE STEEL CONSTRUCTION: Zinc plated high-quality carbon steel construction for robustness and corrosion resistance.
Lightweight ice fishing auger drill adapter for convenient handling and transport.
SAFE AND EASY TO HANDLE: Non-rotated rubber-coated handle adds safety, control, and protection.
0.23" and 0.31" holes allow for universal utilization of ice auger drill bit and a little extension of the screw conveyor.

Check Stock

Eskimo 35600 Pistol Bit 8\ Ice Auger Drill Adaptive Ice Auger Weighs only 3.9 Pounds, Centering Point, Redrills Old Holes Easily Extremely Fast Cutting, 42\

CENTERING ICE POINT: The 8" Pistol Bit (#35600) features a centering point to help keep the bit in place when initializing the cut..
ENGINEERED NYLON/POLYMER FLITE: Keeps the unit lightweight while maintaining flexibility and impact resistance in cold temperatures..
HEXAGONAL, ALUMINUM INNER STEM SHAFT: Efficiently transfers power from drill to cutting head..
HIGH-STRENGTH POLYMER CUTTING HEAD: Reliable performance in all conditions. Aggressive design cuts through ice quickly and smoothly..
REPLACEABLE STEEL BLADES: Dual flat steel blades offer smooth cutting and breakthrough. Can be replaced..
BIT-SAVING TOP PLATE: Included polymer top plate is slightly wider than the auger flite, so you can cut with confidence knowing that you won't lose your drill or auger down the hole..
HIGH-TORQUE, 1/2 INCH CHUCK CORDLESS DRILL REQUIRED: Drill Minimum Requirements: Side stabilizer arm, 1/2" Drill Chuck, 18 Volt/4 Amp Lithium Ion Battery (or higher), Brushless Motor Design, Minimum 725 in/lbs of torque.

Check Stock

GE WR60x10259 Genuine OEM Ice Dispenser Auger Motor for GE Refrigerators

The GE Appliances WR60x10259 Ice Dispenser Auger Motor is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
Replacement GE Appliances Refrigerator Ice Dispenser Auger Motor turns the auger that pushes the ice cubes through the dispenser chute.
GE Appliances WR60x10259 Refrigerator Ice Dispenser Auger Motor has electrical specifications of 115V-60Hz and 3.6A.
High quality GE Appliances OEM WR60x10259 Refrigerator Ice Dispenser Auger Motor is manufactured with premium materials for durability and exact fit, be sure to follow instructions in owners manual when installing this part.
Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories.

Check Stock

Ice Auger Drill Adapter with Handle - 18mm/0.720 Output Shaft Diameter - Steel Cordless Drill Attachment for Ice Auger Drill Conversion

AUGER DRILL ADAPTER: Convert hand auger into a power auger with this ice auger adapter for cordless drill.
Must-have ice fishing accessories to break....
CONNECTIVITY: Ideal cordless drill ice auger attachment to perfectly fit majority augers including Eskimo, Expert Pro, Arctic, Spiralen, Easy Ice,....
POWER DRILL COMPATIBLE: Recommended to use with cordless power drills of 18V–3Ah 40/80 Nm.
DURABLE STEEL CONSTRUCTION: Zinc plated high-quality carbon steel construction for robustness and corrosion resistance.
SAFE AND EASY TO HANDLE: Non-rotated rubber-coated handle adds safety, control, and protection.
0.23" and 0.31" holes allow for universal utilization....

Check Stock