Top Ic Socket Reviews

Dykbkiss 10pcs/Set Universal Chip Micro IC clamp SOP SOIC TSOP MSOP SSOP SMD IC Test Clip Socket Adpter Programmer for Logic Analyzer

Universal Chip micro IC clamp SOP SOIC TSOP MSOP SSOP SMD IC Test Clip Socket Adpter Programmer for logic analyzer.
Universal Chip IC Test Clip Socket Adpter.
clip covered with isolation & no conductivity.

Check Stock

DC 5V/12V/24V Delay Timer Relay, Self-Locking Delay On Off Time Switch Super 555 Timer DC 5V/12V/24V (DC24V )

Huge IC Assortment contains: PC817, NE555, LM358, LM324, JRC4558, LM393, LM339, NE5532, LM386, TDA2030, TDA2822, PT2399, UC3842AN, UC3843AN, ULN2003AN, ULN2803APG, ICL7660s.
Including 2 pcs DIP4 socket, 7 pcs DIP8 socket, 3 pcs DIP14 socket, 3 pcs DIP16 socket, 2 pcs DIP18 socket.
Including 1 DIP-8 to SOP-8 Through-Hole to SMD Converter Adapter.
Contains various usefull IC types such as: Photocouplers, Timers, Osciallators, Dual Opamps, Quad Opamps, Comperators, Audio Amplifiers, Echo Processors, Current Mode Controllers, Darlington Arrays, Voltage Charge Pump.
Sorted accordingly in a labeled plastic box.

Check Stock

HiLetgo 10pcs 140P Single Row Pin Bent Pin Copper Needles 2.54mm Pitch

Supported Package: QFP100, TQFP100, LQFP100.
Socket P/N: OTQ-100-0.5-09, QFP100-0.5-STP.
Application IC: 0.5mm Pitch, 14X14mm IC Dimension.

Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

【Specifications】Voltage Supply: 9-12V DC Input.
Input Distortion: less than 1% (at 1KHz).
【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..

Check Stock

Swpeet 169Pcs 21 Types Integrated Circuit Chip Assortment Kit, Including Opamp, Oscillator, Pwm, LM324, LM358, LM386, LM393, NE5532, NE555, PC817, ULN2003, ULN2803, ICL7660S, JRC4558, LM339, TDA2030AN

1, 【 WHat You Get 】 ----- In this kit, We carefully select the combination series for you to meet your needs for IC chip work.In total 169Pcs You will get LM324,LM358,LM386,LM393,NE5532,NE555,PC817,ULN2003,ULN2803,ICL7660S,JRC4558,LM339,TDA2030AN,TDA2822D,PT2399,UC3842AN,UC3843AN,DIP4 socket, DIP8 socket, DIP14 socket, DIP16 socket, DIP18 socket. So Many different Types popular IC Chip Assortment Kit can meet all your Daily needs..
2, 【 Product Features】 -----Integrated circuits have the advantages of small size, light weight, small solder joints, long life, high reliability, and good performance. At the same time, the cost is low and it is convenient for mass production. Using integrated circuits to assemble electronic equipment, the assembly density can be increased by tens to thousands of times than that of transistors. The stable working time of the equipment can also be greatly improved..
3, 【 The Most Popular Fully Types Integrated Circuit Chip Assortment Kit 】 ------ We have chosen a variety of useful IC types for daily assembly, such as: precision timers, dual operational amplifiers, audio amplifiers, Darlington arrays, quad operational amplifiers, etc. It is suitable for single power supply with a wide range of power supply voltage....

Check Stock

uxcell 10 Pieces 2.54 mm Pitch 14 Pins Round Hole Soldering DIP IC Socket Adaptor

Row to Row Distance(Approx) : 7mm / 0.28".
Each Size(Approx) : 18 x 10 x 8mm / 0.7" x 0.4" x 0.3"(L*W*H).
Package Content : 10 Pcs x DIP IC Socket.

Check Stock

XL IC Chip Assortment 150 pcs, opamp, oscillator, pwm, PC817, NE555, LM358, LM324, JRC4558, LM393, LM339, NE5532, LM386, TDA2030, TDA2822, PT2399, UC3842, UC3843, ULN2003, ULN2803, 7660, Sockets

Huge IC Assortment contains: PC817, NE555, LM358, LM324, JRC4558, LM393, LM339, NE5532, LM386, TDA2030, TDA2822, PT2399, UC3842AN, UC3843AN, ULN2003AN, ULN2803APG, ICL7660s.
Including 2 pcs DIP4 socket, 7 pcs DIP8 socket, 3 pcs DIP14 socket, 3 pcs DIP16 socket, 2 pcs DIP18 socket.
Including 1 DIP-8 to SOP-8 Through-Hole to SMD Converter Adapter.
Contains various usefull IC types such as: Photocouplers, Timers, Osciallators, Dual Opamps, Quad Opamps, Comperators, Audio Amplifiers, Echo Processors, Current Mode Controllers, Darlington Arrays, Voltage Charge Pump.
Sorted accordingly in a labeled plastic box.

Check Stock

5962-8687201CA IC,Logic Gate,Quad 2-Input Nand,F-TTL, Dip, 14Pin, Ceramic 54F38/BCA

BOJACK high quality 10 Values 30 Pcs IC Shift Output Registers kit.
Huge IC chip contains:SN74HC00N, SN74HC02N, SN74HC04N, SN74HC08N, SN74HC14N, SN74HC32N, SN74HC138N, SN74HC164N, SN74HC165N, SN74HC595N.
There are 2 models for each model, a total of 20, The packaging is sorted accordingly in plastic storage boxes.
Including 7 pcs DIP14 socket, 3 pcs DIP16 socket.
IC function:NAND ,NOR ,Hex Inverter,Hex Schmitt-Trigger Inverters,Positive-OR ,Decoders/Demultiplexer,Parallel-Out Serial Shift Registers,Parallel-Load Shift Registers,Counter Shift Registers 3-State Output.

Check Stock

Willwin 30 Pcs 2.54 mm Pitch 8 Pins Round Hole Soldering DIP IC Socket Adaptor

Row to Row Distance(Approx):15.2mm/ 0.6".
Each Size(Approx):51 x 18 x 7.5mm/ 2" x 0.71" x 0.3"(L*W*H).
Double rows, flat straight pins, solder type, great electronic component for PCB board..

Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

Row to Row Distance(Approx):15.24mm/ 0.6".
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

DEVMO 4-pin 12AWG DC Power Supply Cable Compatible with Yaesu Radio FT-450D FT-891 FT-991-A FTDX-1200 Kenwood TS-480SAT TS-590SG Icom IC-7000 IC-7200 IC-7600 IC-7300 Alinco DX-SR9T Vertex

Fit FT-450D FT-950 FT-891 FT-991 FTDX-1200 FTDX-3000 etc with 4 pin power socket.
Fit TS-590SG TS-890s TS-480 TS-480HX TS-480SAT TK-90 TK-790 TK-890 TK-690 etc.
Fit IC-7000 IC-7100 IC-7200 IC-7300 IC-7600 IC-7610 IC-9700 IC-910H IC-F9511HT etc.
Fit DX-SR9T DX-SR8T VX-1400 VX-1700 VX-6000 and other radio transceiver use 4pin power canble plug.

Check Stock

Tegg 8 Pin IC Socket 60 PCS 8 Pin DIP IC Socket Adaptor Solder Type

Product name : DIP IC Socket.Interface type: DIP..
Number of pins : 8.Pitch : 2. 54mm / 0. 1Inches..
Color : black.Package Content : 60 PCS IC sockets..
Made of high quality plastics and metals , good electrical conductivity and long service life..

Check Stock