Top Hydraulic Pump Seal Kit Reviews

DNJ TBK285WP Timing Belt Kit with Water Pump for 2003-2017/ Acura Honda Saturn/Accord Accord Crosstour Crosstour MDX Odyssey Pilot Ridgeline RL TSX Vue / 3.0L 3.2L 3.5L 3.7L / SOHC

THIS KIT INCLUDES: Timing Belt, Timing Seal, Cam Seal, Timing Belt with Hydraulic Tensioner, Timing Belt Tensioner Bearings, Water Pump.
FITS: 03-17 Acura, Honda, Saturn 3.0L-3.7L SOHC Naturally Aspirated.
FITMENT NOTES: w/o VCM, Premium, w/o VCM, Bearing, Front, Front.
You are assured to receive a worldwide proven Timing Belt Water Pump Kit With Hydraulic Tensioner quality part with OE quality fit and performance..
We carefully selected DNJ Engine Components as the sole provider of Belt Kits because no one comes close when it comes to their selection. DNJ has a....

Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....

Check Stock

The American Queen

...Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.

Check Stock

Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats

Front Mount Pump: This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH. The helm allows you to install all of the reliability and comfort of hydraulic steering onto your boat. Get ready to take your boat to the next level..
1.7 Hydraulic Helm: Our front mount 1.7 hydraulic helm provides smooth and efficient no feedback steering for single and multi-outboard engines up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications..
Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be....

Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....

Check Stock

Anbull 10 Ton Porta Power Hydraulic Jack, Upgraded Hydraulic Combined Multifunctional Jack for car Repairs,Auto Body Frame Repair Kit

【Stability and Convenience】 The pump body of this hydraulic jack uses upgraded SEA#1045 steel. The oil passage will not have iron slag, and the new design of the oil passage is more stable. The pressure bar of the hydraulic portable ram kit adopts an integrated type pressure bar, which is beautiful and easy to use.The steel core of the cylinder is chrome-plated, which is more precise and wear-resistant and has a long service life..
【Long Service Life】The hydraulic cylinder steel core of this 10 ton porta power kit is chrome-plated, precise, wear-resistant and has a long service life..
【Stainless Steel Material】The pump of this porta power kit is made of stainless steel, with an industrial luster,which is stronger and harder to break,Compared with other hydraulic jack tool kit,our hydraulic power units give you even more long-term durability..
【Multi-function Auto Body Frame Repair Kit 】Used for car, truck, farm and heavy equipment maintenance. Very suitable for various auto-body repairs, frame repairs and construction jobs..
【Package Include】1x hydraulic hand pump, 1x round seat, 1x rubber ball, 1x V-shaped head, 1x wedge head, 1x connector, 1x flat base, 1x pressure nozzle, 1x ring claw, 1x extension foot, 1x hydraulic cylinder, 4x c....

Check Stock

The Mystery of the Great 4/7 Swap

...Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.

Check Stock

Manifolds or Headers for Your Turbo LS?

...Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.

Check Stock

Straight Exhaust vs. H-Pipe vs. X-Pipe!

...Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.

Check Stock

Thomas & Friends All Engines Go: The Mystery of Lookout Mountain

...Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.

Check Stock

Dyno Proven: 50 HP With One Bolt-On! Engine Masters Ep. 1

...Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.

Check Stock

DNJ TBK418BWP Timing Belt Kit with Water Pump for 1998-2000 / Ford, Mercury/Contour, Cougar, Escort, Focus, Mystique / 2.0L / DOHC / L4 / 16V / 121cid

THIS KIT INCLUDES: Timing Belt, Timing Seal, Cam Seal, Timing Belt Tensioner Bearings, Water Pump.
FITS: 98-00 Ford, Mercury / Focus, Escort, Cougar, Contour, Mystique 2.0L DOHC Naturally Aspirated.
FITMENT NOTES: 42x53x7, 50x60x7, Premium, Bearing, w/ 47mm O.D., w/ 70mm O.D., To 3/99, Front.
You are assured to receive a worldwide proven Timing Belt Water Pump Kit With Hydraulic Tensioner quality part with OE quality fit and performance..
We carefully selected DNJ Engine Components as the sole provider of Belt Kits because no one comes close when it comes to their selection. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.

Check Stock

STKUSA Stark Bead Breaker 10000PSI Hydraulic Bead Breaker for Tractor Truck Tire Bead Breaker with Hydraulic Metal Foot Pump and Air Hose, Hydraulic Bead Breaker

Versatile Application - The bead breaker and foot pump are great for all kinds of tires - ATV, Golf Cart, Bus, Truck, Agricultural, and even Back Hoe Tires.
Easy Operation - The pump adopts the user-friendly foot-actuated design for easy control and operation, time-saving and labor-saving with strong power.
Excellent Removing Tool - Our tire bead tool kit can perform greatly on the tires by loosening tire bead from the rim with leverage without removing the wheels.
Heavy Duty - Max Pressure 10,000psi (700bar).
Pressure Range: 40-150psi (2.8 to 10.3Bar) Our hydraulic bead breaker delivers 10,000 lbs. of force in seconds to break beads smoothly under hydraulic action.
Hydraulic Foot Pump - Our bead breaker tool kit comes with a 700bar air hydraulic foot pump, and one air hose is also included..

Check Stock