Top Hydraulic Manifolds Reviews

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

Schneider Electric AG13B020 Tac Erie Spring Return Two-Position General Close-Off Actuator Without End Switch, Normally Closed

  • Designed for use with Uponor TruFLOW manifolds, stainless-steel manifolds, or engineered polymer (EP) manifolds.
  • Accurately controls the flow of fluid through individual radiant loops.
  • Features an end switch for activation of a relay pump, heat plant, or other auxiliary devices.
Check Stock

The Weekend Brewer 8-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

The Weekend Brewer 2-way 5/16" Barb CO2 Splitter Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

PEX Manifold Radiant Floor Heating Set 3 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

PEX Manifold Radiant Floor Heating Set 6 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

GM Parts 12345982 Supercharger Gear Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

Eastwood High Temperature Resistant Satin Black Coating Aerosol 11.75 oz

  • Produces A Custom Look For Manifolds, Headers.
  • Temperature Resistant Up To 1400 Degrees.
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft.
Check Stock

BBC Holeshot Dual Plane Intake Manifold Oval Port, Plain

  • This Holeshot Manifold by Speedway Motors is the lowest profile intake design.
  • It is the perfect improvement over stock intake manifolds without worrying about hood clearance.
  • Manifolds are a dual-plane intake runner design and machined to accept spread port carburetors.
  • Has a idle-5500 rpm range and an oval port.
  • Features an aluminum construction with a natural finish.
Check Stock

TITAN 757 PERFORMANCE Mercruiser Water Shutter Flappers Replaces 807166A2 V6 4.3L

  • New Mercruiser Water Shutter Kit for 4.3L V6.
  • This will only fit in y-pipe that was on the V-6 engines originally equipped with the one-piece exhaust manifolds. Will not fit later model y-pipes....
Check Stock

GM 4.3L Turbo Kit Hot Parts T3 Cast 4.3 GMC Chevy Turbocharger V6 Wastegate Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

Drip Depot 4 Zone 1\ PVC-Lock Push to Fit Manifold Kit

  • The unique design of 8 manifolds, with 3 plugs, no need to use so many manifolds for closed management..
  • There are fixed ports on both sides, which are convenient to fix after installation..
  • High temperature resistance, corrosion resistance, aging resistance, and more durable to use..
  • There is a plug at the other end of the straight line. If the connection is needed, just pull out the plug..
  • Applicable to spa massage, hot spring, swimming pool, bathtub massage, etc..
Check Stock

Exhaust Bellows Replace Mercruiser 3-4' 70981A3 Sierra 18-2762 Mallory Marine 9-72808

  • Upper Exhaust Bellows for Mercruiser 3-4" 70981A3 3.0 3.7 5.0 5.7 18 2762 89070.
  • 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
  • After market Ref:Mercruiser:70981A3,Mallory Marine: 9-72808,Sierra: 18-2762,GLM: 89070.
  • Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow.
  • used: 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
Check Stock