Top Hydraulic Hose Hose Reviews

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
Handles 4" inner diameter for industrial hose..

Check Stock

Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.

Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..

Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....

Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.

Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....

Check Stock

OTC 1513B 4 Ton Collision Repair Set

Very competitively priced, yet high quality set that includes a single-speed hydraulic hand pump, hose, and ram.
Components snap together for quick setups to apply pushing, spreading, or pulling force.
Components include: hydraulic pump, hose, and ram.

Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

...hoses, transmission lines, heating lines, or any other rubber hose for installation joints in real time..
【Multi Function】Work great for removing all kinds of difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc. Also perfect for pulling o- rings & gaskets on hydraulic fittings, breaking a seal on a stuck hose, brake hoses/fuel hoses/gas lines/coolant hoses/radiator hoses, lawn mower gas lines and vacuum clamps & hydraulic piston seals, clear out a grease fitting, ect..

Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....

Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
【Warranty】Three months limited warranty & Free lifetime technical support..

Check Stock

SHIMANO Deore SM-BH90 Cuttable Hose - Black Front

Premium replacement resin coated hydraulic brake hose.
Stiff reinforced hose that performs under pressure, keeping your brakes sharp.
2.1 mm bore diameter for excellent brake performance and response.

Check Stock

Apache 98399065 1/4\ x 24\

Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications..
Maximum Operating Temperature: 212 deg. F.

Check Stock

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

[ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
[ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
[ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
[Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..

Check Stock