APDTY 140176 HVAC Heater Hose & Control Valve Unit
- Brand New HVAC Heater Hose & Control Valve Unit.
- Restores HVAC Heater Function From A Failed Heater Control Valve Motor.
- Match Vehicle To Compatibility Chart To Ensure Exact Fitment.
Top Hvac Valve Replacement Reviews
BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port
- BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
- R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
- BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
- 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
- The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
- Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
CHEINAUTO 3Pcs AC Manifold Gauge Hose Kit AC Gauge Refrigerants Hose Set Fits R134A R22 R12 R502 R404 R407 R600 5Ft
- 【3 Colors Design】1/4Inch yellow, blue and red hoses feature a 500 PSI working pressure and 2500 PSI burst pressure-ideal for standard....
- 【Universal Replacement】Refrigerant charging hose with compact ball valve deigned to meet 1/4" SAE requirement for refrigerant permutation, fit....
- 【Easy Installation】Strong sealing for durability and safety. Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
- 【Standard Size】Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end for convenient access to the system..
- 【Refrigerant Fittings】Refrigeration charging hoses valve discharge conditioning, refrigerant charging, refrigerant discharge, recharge yellow....
Hvac Service Wrench Tools:3/16” to 3/8” 5/16'' x 1/4''Air Conditioner Valve Ratchet Wrench with 2 Hexagon Bit Adapter Kit for Air Refrigeration Tools and Equipment Repair Tools Clearance
- HEXAGON HEAD ADAPTER - S2 alloy steel and surface heat treatment, can be used with the 1/4 inch socket of the HVAC service wrench, suitable for a variety of sizes. The hexagonal head adapter has a bead structure to prevent it from falling off the handle due to gravity when it is pointed downward..
- EASY TO USE - Valve wrenches 1/4", 3/8", 3/16", 5/16", hexagon head adapter: 2 inches long, size: 3/16" and 5/16' 'These sizes are the most commonly used sizes when repairing air conditioning and refrigeration equipment..
- WIDE SCOPE OF APPLICATION - Air conditioning tools are specially designed for maintenance and use. They are compatible with air conditioning, refrigeration and other equipment. It is convenient for you to open and close the compressor maintenance valve, rotary lock valve and shut-off valve. HVAC tools are suitable for daily work and Home maintenance..
WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600
- Wide Application: Suitable for home refrigeration equipments, dual size sae 1/4'' & 5/16'' port makes the valve core remover tool be compatible with R410, R22, R12, R407, R404, R32 A/C air condition system, etc. (Not suitable for Automotive AC).
- Easy to Install: Use this hvac valve core remover tool, the valve core rod makes it be easily inserted into the inner valve core to control the valve core. you don't need to stop the machine and release the refrigerant. Note: Before removing the valve core, close the valve of the valve core wrench and disconnect the air conditioner inner connection..
- Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
- Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
- High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and ....
Wayne WCP85 Condensate Water Transfer Pump for HVAC Systems
- Max. Flow rate is 150 gallons per hour at 0 ft. Of discharge lift.
- Durable, corrosion-resistant stainless steel shaft.
- Transfers condensation from air conditioners and hvac systems to a nearby drain.
- 3/8 in. Discharge with built-in check valve with a 2-quart reinforced thermoplastic reservoir.
- Water moving tasks around the home or farm.
- high-water protection switch to shut off HVAC system.
- Corrosion resistant, thermoplastic construction.
- 3/8 in. hose discharge connection with built-in check-valve.
Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 1 Pack
- Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
- Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
- Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
- Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
- Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 4 Pack
- Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
- Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
- Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
- Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
- Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
CHEINAUTO AC Charging Hoses 3Ft AC Manifold Hoses R134A, R22, R12, R502, R404, R407, R600 Added Fluorine 3 Color Refrigerant Tube for Air Condition Refrigerant
- 【3 Colors Design】1/4Inch yellow, blue and red hoses feature a 500 PSI working pressure and 2500 PSI burst pressure-ideal for standard refrigerants..
- 【Universal Replacement】Refrigerant charging hose with compact ball valve deigned to meet 1/4″ SAE requirement for refrigerant permutation, fit most refrigerants like R134A, R22, R12, R502, R404, R407, R600..
- 【Easy Installation】Strong sealing for durability and safety. Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
- 【Standard Size】Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end for convenient access to the system..
- 【Refrigerant Fittings】Refrigeration charging hoses valve discharge conditioning, refrigerant charging, refrigerant discharge, recharge yellow jacket interdynamics conditioning..
Elitech PG-30 Blue Digital Low Pressure Gauge for HVAC Refrigerant with Backlight -14.5~500 PSI 1/8” NPT
- ...e designed with high-strength engineering plastics and flexible non-slip silicone. The whole HVAC pressure gauge is solid and comfortable to hold. The exquisite design of the foldable hook ensures that the digital ac gauge is in a safe position during the measurement of air conditioning tools & equipment. Long-life valve switch, 1/4 inch standard interface design to ensure the durability and versatility of the instrument..
- 5.【HVAC Manifold Gauge Set for Pressure Leak Test】The HVAC pressure gauge calculates the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking. Pressure leak measurement, leak time and speed record. Using a digital manifold gauge set can make your job easier..
- 6.【Refrigerant Gauges with Visual Window and LCD Display】The charging status of refrigerant can be directly observed through the refrigeration gauges window, which makes the operation more convenient. 7.5CM×4CM display screen, support LCD backlight, convenient lighting operation, the displayed data is clearer and easier to read..
- 7.【Note】The digital HVAC gauges will read random numbers when it is powered on. Correct steps: 1. Turn on, then close the two valves, press the “ZERO” key to clear ....
Mastercool DOT-Approved Recovery CYLINDERS-30#
- Valve Type: HVAC Y-Valve 1/4" SAE(Valve Rated for 5 Years).
- 1/4" and 3/4" NPT Ports for float switch and other add-ons..
- Reusable and conforms to DOT-4BA400 specifications and ARI guidelines..
- The tank is Pre-Charged with Nitrogen gas to provide a clean, dry interior..
iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\
- Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
- Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
- One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
- Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
- Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Yellow Jacket 49017 Digital Refrigeration Gauge
- 【Superheat and Subcooling Test&Pressure Leak Test】When refrigerant type is set and temperature clamps are connected to air conditioning pipes, HVAC gauges automatically read the degree of Superheat(SH) and Subcooling(SC). The higher the degree of superheat, the smaller the opening of the expansion valve (the refrigerant filling is less) can be determined. Calculate the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking..
- 【Vacuum Pumping & Refrigerant Filling & Built-in 89 kinds of Refrigerant Database HVAC Manifold】Digital manifold gauge set can connect refrigeration equipment and vacuum pump for vacuum pumping operation. Vacuum pumping can make it easier to fill the refrigerant into the pipeline. HVAC gauges is built-in 89 kinds of refrigerant pressure&temperature database. Before you fill refrigerant, you can set different types of working refrigerants according to the car needs to fill..
- 【Refrigerant Observation Window & Large LCD Digital Display & Multiple Unit Switching】When filling the refrigerant, you can observe the filling status of the refrigerant through the visible window. Equipped with large LCD display, clear data display and easy to read.....