Top Humidity Inspection Tool Reviews

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

Preciva 5PCS Magnetic Telescoping Pick-up Tool Kit with 15lb and 1lb Pick Up Rod Round and Square 360 Swivel Adjustable Inspection Mirror and Telescoping Flexible LED Flashlight Batteries Included

  • 5pcs Magnetic Pickup Tool Kit: 1 piece 15lb magnetic pickup rod, 1 piece 1lb magnetic pickup rod, 1 round shaped inspection mirror ,1 square shaped....
  • Telescoping Handle : The 15lb pickup tool can be telescoped from 7.08 to 30.3 inch, while the 1lb pickup tool could be from 5.11 to 25.19 inch. The....
  • 360 Swivel Adjustable Design: The LED flashlights and the round/ square inspection mirrors are 360 swivel adjustable. And they are convenient for your....
  • Equipped with LED Lights: The flexible flashlights comes with 3 LED lights, and the the square inspection mirror comes with 2 LED lights..
  • Widely Application:These 5 pieces magnetic pickup tool kit could be used for finding metal nuts, bolts, screws, and other metal pieces.
Check Stock

Inch External Chamfer Inspection Tool Chamfering Welding Gauge

  • [FUNCTION]External Chamfering Inspection Tool can measure internal or external chamfer.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure of 0-2in, 1/32in increments,+-1/64in accuracy.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
  • [MATERIAL]The Chamfer Tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [PORTABLE]The Chamfer Gauge is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
Check Stock

4 Pieces Telescoping Inspection Mirror Telescoping LED Lighted Flexible Inspection Mirror Round Mirror Square Mirror Inspection Tool for Checking Observing Vehicle Small Part (Elegant Style)

  • ...can be clipped in a shirt pocket when not in use or needs to be carried.
  • It is not only lightweight and convenient, but also can be applied as an ornament.
  • The grooved buffer handle provides a comfortable and tension-free holding experience, allowing You can easily check and adjust makeup.
  • Easy to carry: telescoping inspection mirror is a good tool to meet your inspection needs, with a telescoping rod, the length of the handheld rod can be adjusted according to your needs, and it can be reduced to the smallest size after use, which is convenient to carry and store.
  • the neck mirror can be rotated 360 degrees for easy observation hard-to-reach areas.
  • Extensive usage: led flexible inspection mirror can help you to find small item, reach the corners and gaps, which is the practical additions for tool manufacturers, mechanics, inspectors, dentists, makeup artists and mechanics.
  • The telescopic rod can expand and contract at will, and the rotating neck mirror allows you to adjust the position of the mirror and observe every small area.
  • Ideal choice: rotatable telescopic inspection mirrors are ready when you need them, and stored in garages, tool boxes, cars, dressing tables, cosmetic bags or wherever you need them when not in use.
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Gifts for Men Telescoping Magnetic Pick Up Tool Kit with 1 lb and 15 lb Pickup Rod, Round and Square 360 Swivel Adjustable Inspection Mirror and Flexible LED Flashlight

  • Best Gadgets for Men: 1 piece 1 lb magnetic pickup rod, 1 piece 15 lb magnetic pickup tool with LED light, 1 round shaped inspection mirror, 1 square shaped inspection mirror with light and 1 telescoping magnetic pickup tool magnetic flashlight..
  • Tools for Men with A Lot of Tools: The magnetic telescoping pickup tool kit can easily find and grab nuts, bolts, screws, and other metal pieces behind appliances, cabinets, automobile parts, work benches, etc.This extendable flashlight kit is a great addition to tool box for car mechanics, automotive electrician, craftsman, handyman, engineers, carpenters, plumber..
  • Versatile & Perfect: The upgraded magnetic base can be stably placed in any iron area，The 0.28 inch diameter head and retractable rod can easily reach extremely narrow places. The 15 pound magnetic pickup rod head provides illuminating. The round and square mirrors provide you with additional picking angles and illumination..
  • Wide Field of View & Comfortable Grip: The LED flashlights and the round/ square inspection mirrors are 360 swivel adjustable. You can light up clumsy, narrow, hard-to-reach areas or use it like a hook tool. The soft handle allows comfortable and secure grip..
  • Men‘s Gifts: MANWALD 5 pieces magnetic pickup tool kit built wit....
Check Stock

W.S Chamfer Gage Chamfering Ruler External Chamfered Inspection Tool Chamfering Gauge Stainless Steel 0-30mm

  • [FUNCTION]External Chamfering Tool can measure internal or external chanfer,Used in mechanical manufacturing, glass processing and other fields.
  • [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure range of 0-30mm, 0.5mm increments,+-025mm accuracy.
  • [PORTABLE]The Chamfer Tool total length of 65mm,width 26mm.
  • is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
  • [MATERIAL]The welding inspection tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
  • [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
  • And the back of the inspection tool has a sketch of how to use laser engraving.
Check Stock

SAVITA Telescoping Inspection Mirror,Telescopic Mirror Tool with Extended Handle Machine Tool Inspection Mirrors for Checking Vehicle Condition(9.3-21.7Inch Handle)

  • Package Content: You will receive 1pc telescoping inspection mirrors, measuring the mirror size: diameter 5cm/2in and extension size:23.5-55cm/ 9.3-21.7inch..
  • All-Direction Mirror: The inspection mirror can rotate through 360 degrees for the perfect viewing angle, offering your observation in all directions. It can be easily observed even in the small details, very practical..
  • Extendable Handle: Extendable handle help you see hard-to-reach areas. You can adjust the length of the hand-held rod according to your needs, and shrink to the minimum size to store easily after use..
  • Ergonomic Design: The auto inspection tool has a skidproof grip handle, which grips comfortably and will not slip in wet or oily hands..
  • Wide Application: The flexible inspection mirror can be used widely for tool makers, mechanics, inspectors, dentists, makeup artists, etc. Foldable and lightweight mirrors are convenient to store in your garage, dresser, makeup bag, toolbox, car, or wherever you need it..
Check Stock

Gifts for Men, Stocking Stuffers for Men 5Pcs Magnetic Pickup Tool, Christmas Birthday Gifts for Dad Him, Telescoping Flexible Flashlight with Pick Up Rod, Round/Square Inspection Mirror for Mechanic

  • ...until they have! A cool gadget, unusual gift idea for men women who have everything. Unique stocking stuffers for men and women will be glad to add this item to their toolboxes..
  • Magnetic Pickup Tool Kit (5 Pieces): The kits includes 1 Telescoping Flexible Extensible Mini Flashlights, 1 Round 360° Swivel Adjustable Inspection Mirror, 1 Square 360° Swivel Adjustable Inspection Mirror, 1 piece 15lb Magnetic Pick Up Rod and 1 piece 1lb Magnetic Pick Up Rod..
  • Super Bright Flashlight：The super bright LED light has 3pcs super-bright LED beads to provide greater visibility in dark spaces. The telescoping flexible head with a powerful magnet can accurately pick up metal objects from hard-to-reach areas. And the magnetic base can be attached to the metal, free your hands, to illuminate the place where you need it..
  • 360°Rotation Round & Square Inspection Mirrors: Telescoping inspection mirror is a good tool to meet your inspection needs, with a telescoping rod, the length of the handheld rod can be adjusted according to your needs, and it can be reduced to the smallest size after use, which is convenient to carry and store.
  • the neck mirror can be rotated 360 degrees for easy observation hard-to-reach areas..
  • Widely Application: Could be used for finding ....
Check Stock

MERIC Hermit Crab Humidity and Temperature Reader, Black Analog Thermometer and Hygrometer for Terrariums, Color-Coded Sections, Measures in Fahrenheit and Percent, 1 Pc per Pack

  • 2-In-1 Measuring Device — A reliable gauge, Humidity and Temperature Meter for Hermit crabs by Meric will keep your little crawlers in optimal condition. This dual meter will allow you to monitor and maintain an ideal crabitat temperature ranging between 72° – 80° Fahrenheit and a humidity range between 70% and 80% moisture level..
  • Easy To Read Color-Coded Measurements — This measuring tool makes sure that you can visually check your terrarium’s condition even from a distance. When the moving pointer is heading blue, it means that the temperature is freezing, or humidity is extremely dry. On the other hand, the red indicator states it’s too hot, or the humidity level is heavy. Aim for the green level as it signifies that the enclosure is in perfect condition..
  • Ready To Use — This analog thermometer and hygrometer can function instantly. Its mechanical, physical sensor works by pulling the pointer during the expansion and contraction of the metal sheet while the temperature and humidity levels are changing..
  • Easy Set-Up — This device does not demand any complicated installation. When you release the convenient latch attached to its body, it can easily support itself. Place it on the desired location or any surface in your tank and you are....
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Yu-Gi-Oh! - Ikelos The Dream Mirror Sprite - RIRA-EN085 - Ultra Rare - 1st Edition - Rising Rampage

  • 2-PACK INSPECTION MIRROR: Is the perfect tool for all your inspection needs. Featuring a telescopic stick that extends up to 24.5 inches and retracts....
  • CONVENIENT USE: Ideal for toolmakers, machinists, inspectors and mechanics to get into hard to reach areas, nooks and crannies. Telescoping stick....
  • ERGONOMIC HANDLE: Grooved cushion handle provides a comfortable and strain free gripping experience so you can perform inspections with ease..
  • ATTACHED METAL CLIP: Is a convenient option to keep this tool handy with you whenever you need it.
  • simply retract tool all the way down and attach to....
  • 2-PACK: Keep these available whenever you need them.
  • store in your garage, tool box, car, or wherever you need to have one handy. They also make a....
Check Stock

Humidors for cigars

  • ★Easy Grip and Safe► Glass cigar case Includes SILICONE NON-SLIP CASE to ensure a non-slip grip, and for better protection. Our humidor cigar box is the perfect birthday, anniversary, or Christmas gift for any cigar aficionado in your life..
  • ★After-Sale Service► Every product has undergone rigorous inspection.and we take customer satisfaction very seriously and always welcome your feedback. Any question or problem, contact us and you will get a satisfactory solution..
Check Stock