Top Hub Axles Reviews

Maximum Velocity Derby Car Kits | Bulk Pack (12) | Pine Block Kits Includes Wheels & Axles | Pinewood Car Kits

FANTASTIC DERBY CAR KIT - Highest quality out of the box wheels and axles for derby car kit. Don’t worry about filing off flaws, or losing hub caps. Our axles have no burrs or crimp marks, and install without hub caps. You can use them as-is, or lightly polish them with a metal polish..
PREMIUM BLOCKS - Our derby car kit blocks are soft, kiln-dried, northwestern pine blocks, cut precisely to 7 inches long, 1-3/4 inches wide. Accurately duplicating the dimensions of the BSA pinewood block..
HERE TO HELP - Maximum Velocity has been serving the Pine Derby community for 20 years. All our products are tested and proven to help you reach Maximum Velocity!.

Check Stock

AR-PRO 4.80/4.00-8" Flat Free Tire - 14.5”D x 3.2”W Universal Solid Wheelbarrow Tire with 3” Hub and 5/8” Axles – Extra Adapter kit includes 3/4” Ball Bearings, 1” and 1/2” Nylon Spacers

...free tire has a diameter of 14.5 inches and a width of 3.2 inches. It’s a compatible replacement for tire sizes between 13 inches to 16 inches in diameter, including 4.80/4.00-8”, 4.00-8”, 4.00-6”, and 3.50/2.50-8”.
FLAT-FREE TIRE WITH 3” HUB LENGTH FITS 5/8” AXLES - This tire fits 5/8 inch axles, and it has a 3-inch long centered hub. But it’s also possible to exchange the bearings to fit 3/4 inch axles and lengthen the hub to 7 inches with the included nylon spacers.
SOLID POLYURETHANE FOAM TIRES - Enjoy flat-free tires with the comfort and maneuverability of pneumatic tires. This tire is non-marking, does not rot or deteriorate even under direct exposure to sun and rain, and most importantly, the tire will never flatten..
FREE ADAPTER KIT WITH 3/4” BALL BEARINGS AND NYLON SPACERS - Each pack includes a total of 8 pieces of accessories including 2 pieces of 3/4 inch ball bearings, 2 pieces of 1-inch long nylon spacers, and 4 pieces of 1/2 inch long nylon spacers.
MAXIMUM 300 LBS LOAD CAPACITY - Haul without worries as these flat-free tires can safely accommodate....

Check Stock

Axle Mount Hitch Cup with Quick Release Skewer for Thule Child Carrier/Thule Chariot Bike Trailer

Allows for your Thule child carrier to be used on a second bike. Switch your Thule Chariot bike trailer easily between 2 bikes with this Hitch attachment..
Easily move your cycling-ready carrier from one bike to another.
Includes: Extra Long Quick Release Skewer and hitch cup. Works with cycling-ready Thule Chariot child carriers that already have a hitch arm..
Maximum capacity for a single Thule child carrier is 75 pounds (34 kilograms) and for a double Thule child carrier it is 100 pounds including children and cargo..
Note: If you have an Internally Geared Hub, you will require an Thule Internal Hub Hitch Adapter. Our product Installs on bikes with solid and quick-release rear axles. Bikes with 12mm Thru Axles will require additional adapters.Bikes with Shimano and SRAM internal hubs may require adapters.

Check Stock

GG Grand General 20029 Stainless Steel Standard Rear Hub Cap

High quality stainless steel rear hub cap for newer trucks, towing, trailers, RVs, buses and others.
Fits 8-1/2" diameter axle with 8 of 3/4 inches studs.
8" inside diameter with 3" overall height.
Designed for newer trucks axles with long studs.
Simple snap onto the hub for easy installation.

Check Stock

4Pack Vgoohobby RC 4mm Brass Wheel Hub Knuckle Counterweight Front Rear Wheel Axle Drive Shaft Joint Compatible with Axial SCX24 Deadbolt AXI90081 AXI00002 AXI00001 1/24 RC Crawler Car

The brass wheel hub knuckle and drive shaft compatible with Axial SCX24 Deadbolt AXI90081 AXI00002 AXI00001 1/24 RC 4WD rc crawler car.
The wheel hub made of high quality brass,sturdy and durable,not easily damaged..
Total 4Pcs shaft,2Pcs Front Drive Axles and 2Pcs Rear Drive Axles；Extended 4mm length to widen the wheel track,and it will run more stable and smooth..
Add weight 5g/each fitted to the wheels to lower the rc wheel center of gravity,so that the crawler is more grabby to the ground and able to crawl in a larger angle..
CNC precise machined,great strength and stable performance..

Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

GREPSPUD 4pcs 1.98'' Trailer Hub Bearing Dust Caps, Trailer Axle Dust Cap Cup Wheel Center Grease Cover Caps & 4pcs Extra Rubber Plugs for 2000 to 3500 lb Boat Trailer Dexter EZ Lube Trailer Camper RV

...th removable rubber plugs, easy to install and maintain..
【SIZE & COMPATIBLE WITH】- OD: 1.98 inch/50.4mm. Please check the size information and compatibility carefully before placing an order. Fits most standard 2000 -3500 pounds trailer wheel hub for both types of axles EZ Lube and standard. Fits standard brake & idler trailer axles for most 4 lug & 5 lug axles with 1.98 in diameter cap..
【SATISFACTION GUARANTEE】- For whatever reason, if you are not satisfied, you can contact us for replacement or full refund. Please rest assured purchase..

Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Check Stock

HQPASFY Wheel Hub Removal Tool 8629 Replacement for ATD Tools ATD8629 Compatible with All Axle Bolt Hubs (5, 6 and 8 Lug Hubs)

【HIGH QUALITY】Long life-span matters, that is why hub remover kit are made from high-quality steel with black oxide surface which has excellent rust resistance and durable to ensure it can work a long time.
【HOW TO USE】Fix the 8629 hub removal tool to the hub using the flange nut provided and then strike the end of the removal tool with a 5-pound or heavier hammer until the hub comes loose. Attention: This tool must be installed at the 12 o'clock position.
【FUNCTION】Using this 8629 hub removal tool, you can safely and quickly remove hub components or frozen hub assemblies without damaging the axles.
【Advantages】Attached with enough flange nuts: 12mm-1.50, 14mm-1.50, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18. Works on nearly all hubs whether two wheel drive or four wheel drive.
【12-MONTH WARRANTY】If you have any other questions about our products, please contact us anytime and we will be glad to assist you. Your satisfaction is the direction we have been working towards.

Check Stock

OCPTY Trailer Hub Brake Drum 10 x 2-1/4 Wheel Bearing Kits For 1-1/16 Outer 1-3/8 Inner Tapered Spindle Grease Seal For 3,500 lb. Axles 5 Bolt Lug

Black 10 x 2-1/4 trailer brake drum kit. Bolt pattern is 5 on 4.5.
Races are pre-installed Fits 3,500 lb. axles, Rated to 1,750 lbs. each or 3,500 lbs. For the pair.
This hub bearing is meticulously manufactured and easy-installation designed, which can bring you a convenient and fantastic using experience.
1 pack Trailer Brake Drum Hub kit For 1 year after-sale warranty.
Complete assembly with hub, bearings, seal, cap, Lug Nuts.

Check Stock

Wheel Hub Removal Tool Replace for ATD 8629 Tools, Compatible with All Axle Bolt Hubs - 5, 6 and 8 Lug Hubs

Great Compatibility: Universal Mount Fits All Axle Bolted Hubs (5, 6 and 8 Lug Hubs).
Function: Using This Wheel Hub Removal Tool, Can Safely and Quickly Removes the Wheel Components, the Frozen Hub Assembles Instantly Without Damaging Axles. Direct Replacement for Atd.
Heavy Duty: Our Product Using 3 Reinforcement Plate For Long Lasting..
Strong Materials and Construction Increase the Service Life of the Tool.
Factory Direct Sales, Best Price and Service..

Check Stock